• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.1-5
• /
• 2000

Physicochemical properties and gelatinization patterns of purple-fleshed sweet potato starch were studied. Shape of starch granule was round and polygonal, X-ray diffraction pattern was Ca-type. Amylose content was 14.4% which was lower than that of other sweet potato starch. Water binding capacity was 82.54%, swelling power and solubility at 8$0^{\circ}C$ were 27.94% and 15.35%, respectively. Initial temperature of gelatinization was 72$^{\circ}C$ using Brabender/Visco/Amylograph, consistency and setback were lower than those of other sweet potato starch. The peak temperature and enthalpy determined by DSC were 68.1$^{\circ}C$, 1.24cal/g, respectively. The transmittance of starch dispersions in alkaline solutions increased with NaOH concentration up to 0.17N, and then changed slowly at 0.19N or above. The apparent viscosities were similar to the transmittance of starch dispersions in alkaline solutions, but drastically increased above 0.21N.

• Animal Systematics, Evolution and Diversity
• /
• v.31 no.2
• /
• pp.86-94
• /
• 2015

The two zooxanthellate scleractinian corals are newly recorded in Korea: Psammocora albopicta Benzoni, 2006 of the family Psammocoridae and Oulastrea crispata (Lamarck, 1816) of the family Faviidae. These families are also newly recorded in Korea. Specimens were collected from the subtidal zones of Jeju-do Island, Korea by SCUBA diving from 1999 to 2014. Two scleractinians are described based on the morphological characters of skeletal structures. Psammocora albopicta is distinguished by its encrusting cerioid growth form, high density of corallites, small calicular diameter, single styliform columella, and fewer rows of enclosed septa. Oulastrea crispata is characterized by its encrusting plocoid growth form, polygonal calicular shape, irregular paliform lobes, and papillose columella.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.279-282
• /
• 2004

In this paper, A new type of piezoelectric step motor using piezoelectric torsional actuator and a pair of one-way clutch bearing is designed, manufactured and tested. The torsional actuator consists of 16-polygonal tube that can produce angular displacement using shear mode of piezoceramic. One-way clutch bearing convert oscillation of torsional actuator into continuous rotation. After performance testing of torsional actuator, the optimum condition for driving motor is investigated in terms of wave shape, excitation frequency and electrical field. The performance of the motor is experimentally evaluated. As a result, square wave has larger rotation speed than sin wave, and the maximum rotation speed of 57 rpm is measured at 3850 Hz and 100V/mm.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.6
• /
• pp.315-322
• /
• 2021

In this study, we investigate the variation in microstruture and mechanical property of austenitic 316L stainless steel during long-term material degradation. To simulate the material degradation, the AISI 316 steel was exposed to accelerate under a temperature of 600℃ for up to 10000 hours at each predetermined heat treatment time. As the long-term material degradation time increase, the grain shape was changed from polygonal grains with annealing twins to circular grains. Most twins distributed uniformly interior of grains are recovered and disappered with long-term material degradation. Also, the δ ferrite along grain boundaries decomposed and transformed into the σ phase resulting in decrease of elongation of austenitic 316L stainless steel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.535-541
• /
• 2013

The present study was carried out to investigate the effects of welding parameters such as current, voltage and shielding gases on the bead shape, microstructures and hardness. It was confirmed that bead height was lowered and bead depth was increased with increasing voltages while height, depth and width of beads increased with welding currents. The hardness of weld metals with Ar+10% $O_2$ and Ar+20% $CO_2$ was low due to the formation of grain boundary and polygonal ferrites while that of weld metals with Ar+2% $O_2$ was high due to the presence of acicular, bainitic and sideplate ferrites.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.317-332
• /
• 2004

Osteoblasts from alveolar bone may have an important role in the bone regeneration for periodontium, but their culture and characterization are not determined yet. The purpose of this study was to investigate the biological characteristics of primary explant cultured osteoblasts(PECO) from alveolar bone. Osteoblasts were isolated and cultured from alveolar socket of extracted tooth in children. To compare the characteristics, osteoblasts and gingival fibroblasts were cultured with DMEM at $37^{\circ}C$, 5% $CO_2$, l00% humidity incubator, and human fetal osteoblasts cell line(hFOB1) were cultured with DMEM at $34^{\circ}C$, 5%, $CO_2$ 100% humidity incubator. To characterize the isolated bone cells, morphologic change, cell proliferation and differentiation were measured. Morphology of PECO was small round body or cuboidal shape on inverted microscope and was similar with hFOB1. PECO became polygonal shape with stellate and had an amorphous shape at 9th passage in culture. PECO had significantly higher activity than that of gingival fibroblasts and hFOB1 in alkaline phosphatase activity. The expression of osteocalcin and bone sialoprotein in PECO was notably increased when compared with hFOB1 and gingival fibroblasts. These result indicated that PECO from alveolar bone in children has an obvious characteristics of osteoblast, maybe applied for the regeneration of bone.

• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.139-145
• /
• 2001

This study was undertaken to determine the normal serial ultrasonographic appearance of the postpartum uterine involution in small pet dogs (Yorkshire terrier and Maltese). Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored by ultrasonography in 12 small pet dogs. Serial ultrasonographic examinations were done daily during the first week, 3 days interval from 8 to 30 days, and weekly from 31 to 100 days postpartum. The excretory period of vaginal discharge in 12 normal bitches of uterine involution was finished completely within 3 weeks postpartum. The short axis shape of the uterus was initially often flaccid-appearing. It varied from circular to polygonal. This lasted until 15.75$\pm$3.84 days postpartum, during which time the short axis uterine shape gradually changed to circular. Also, the long axis shape of the uterus was a beaded appearance until 30.89$\pm$4.25 days postpartum. After 30 days, it was appeared as tubular shape between placental and interplacental sites. The ultrasonographic image of the postpartum uterus consisted of four echogenicity distinct layers. Uterine wall was represented as very hyperechoic serosa, hypoechoic myometrium, hyperechoic endometrium and anechoic structures of fluid in the uterine cavity until 7 days postpartum. The individual uterine layers were most prominent during the first week postpartum, and they became progressively less distinct throughout the course of uterine involution. The thickness of myometrium was decreased rapidly in the placental sites from 4.47$\pm$1.42 mm at 1 day to 1.92$\pm$0.26 mm at 16 day, and in the interplacental sites from 3.19$\pm$0.61 mm at 1 day to 1.39$\pm$0.61 mm at 16 day. And it was decreased slowly until 94 day and was been minimum thickness at 94 day. The thickness of endometrium was also decreased like that of myometrium. The uterine diameter in the placental sites was decreased from 22.28$\pm$3.01 mm at 1 day to 16.11$\pm$1.46 mm at 7 day, and in the interplacental sites was decreased from 13.65$\pm$2.34 mm at 1 day to 9.41$\pm$1.59 mm at 7 day postpartum. From 7 day to 93 day, the change of diameter was more and more slow. At 94 days postpartum, the uterine diameter was 5~6 mm both placental and interplacental sites, and the uterine horns were uniform hypoechoic, tubular structures without enlargement. Therefore, complete involution of the uterus occurred at 94 days. It was concluded that normal post partum uterine involution in small pet dogs appeared to be completed 94 days postpartum by gross findings such as vaginal discharges, and by ultrasonographic findings, uterine shape and echogenicity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.1-111.1
• /
• 2015

As an alternative way to get sophisticated nanostructures, atomic force microscopy (AFM) has been used to directly manipulate building primitives. In particular, assembly of metallic nanoparticles(NPs) can provide various structures for making various metamolecules. As far, conventionally made polygonal shaped metallic NPs showed non-uniform distribution in size and shape which limit its study of fundamental properties and practical applications. In here, we optimized conditions for deterministic manipulation of ultra-smooth and super-spherical gold nanoparticles (AuNPs) by AFM. [1] Lowered adhesion force by using platinum-iridium coated AFM tips enabled us to push super-spherical AuNPs in linear motion to pre-programmed position. As a result, uniform and reliable electric/magnetic behaviors of assembled metamolecules were achieved which showed a good agreement with simulation data. Furthermore, visualization of near field for super-spherical AuNPs was also addressed using photosensitive azo-dye polymers. Since the photosensitive azo-dye polymers can directly record the intensity of electric field, optical near field can be mapped without complicated instrumental setup. [2] By controlling embedding depth of AuNPs, we studied electric field of AuNPs in different configuration.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.947-954
• /
• 2009

This paper proposes a novel method that reconstructs a surfel-based object by using visual hull from multiple images. The surfel is a point primitive that effectively approximates point-set surface. We create the surfel representation of an object from images by combining the LDC(Layered Depth Cube) surfel sampling with the concept of visual hull that represents the approximated shape from input images. Because the surfel representation requires relatively smaller memory resources than the polygonal one and its LDC resolution is freely changed, we can control the reconstruction quality of the target object and acquire the maximal quality on the given memory resource.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.293-298
• /
• 2011

Physical and structural characteristics of four local barnyardgrass flour and starch were investigated. Amylose content ranged from 6.9 to 12.5%. The BP 3563 and BP 3606 were low amylose lines, and the BP 3592 and BP 3610 showed very low amylose lines. Peak viscosities of four barnyardgrass collections BP-3563, BP-3592, BP-3606, and BP-3610 ranged 264 to 2397. All barnyard grass lines displayed an A-type X-ray diffraction pattern showing the strong diffraction peak at around $2{\theta}$ values $15^{\circ}$, $17^{\circ}$, $18^{\circ}$ and $23^{\circ}$, and a small peak at $20^{\circ}$ $2{\theta}$. Scanning electron microscopy revealed that the starch granule sizes ranged $5.5-12.5{\mu}m$ in diameter showing polygonal and rarely spherical in shape with round edges and some pores at the surface. Starch crystallinity of BP 3563, BP 3592, BP 3606, and BP 3610 was 23.9, 25.0, 24.7, and 25.5%, respectively.