• 폴리머
• /
• 제29권3호
• /
• pp.277-281
• /
• 2005

비바이러스성 DNA 전달체 중에서 최근 양이온성 고분자와 양이온성 리피드들은 많이 연구되어 왔다. 본 연구에서는 비바이러스성 유전자 전달체로서 양이온성 고분자인 폴리에틸렌이민(PEI)을 리피드에 수식하여 더 효과적인 전달체를 제조하고자 하였다. 새로운 양이온성 리피드(PEI-DSPE)는 1,2-디아실-sn-글리세로-3-포스포에탄올아민(DSPE)과 PEI를 이용하여 고수율로 합성하였다. 1,2-디스테아로일-sn-글리세로-3-포스포콜린(DSPC), L-$\alpha$-포스파티딜콜린(소이-하디드로제네티드) (HSPC), 콜레스테롤(CHOL) 및 합성된 PEI-DSPE를 이용하여 리포좀을 제조하였다. 리포좀 제조는 리피드 함량에 대해 양이온성이 도입된 PEI-DSPE의 양을 증가시키며 수행하였다. 제조된 리포좀의 크기는 PEI-DSPE의 첨가량이 증가할수록 감소하였으며 리포좀의 표면전하 또한 양의 값으로 증가됨을 관찰할 수 있었다. PEI-DSPE 양적 변화에 따라 제조된 리포좀을 이용하여 DNA의 복합체 형성에 관한 결과 사용된 리포좀의 함량이 증가할수록 DNA와의 복합체 형성이 용이함을 전기영동 및 형광 측정을 통해 관찰할 수 있었으며 형성된 복합체가 사용된 리포좀 함량이 증가할수록 양이온적 성질이 증대됨을 관찰할 수 있었다. 그러므로 본 연구에서 합성한 PEI-DSPE를 사용하여 제조된 리포좀이 유전자 전달체로서의 가능성을 갖고 있음을 확인할 수 있었다.

• 멤브레인
• /
• 제31권6호
• /
• pp.404-416
• /
• 2021

본 연구에서는 PEBAX2533에 합성된 GO와 PEI-GO의 함량을 달리 첨가하여 혼합막을 제조하고 N₂와 CO₂의 투과 특성을 연구하였다. PEBAX/GO 혼합막의 N₂와 CO₂ 투과도는 전체적으로 GO 함량이 증가할수록 감소하였고, GO 0.3 wt%에서 가장 높은 CO₂/N₂ 선택도 58.9를 보였다. 그리고 PEBAX/PEI-GO 혼합막에서 N₂ 투과도는 PEI-GO 함량이 증가함에 따라 감소하였고, CO₂ 투과도는 PEI-GO 함량에 따라 다른 경향을 보였으며 전체적으로 PEBAX/GO 혼합막보다 더 높은 CO₂/N₂ 선택도를 보였다. 특히 PEI-GO 0.3 wt%는 혼합막들 중 가장 높은 CO₂/N₂ 선택도인 73.5를 보이며 Robeson upper bound 위에 위치하는 긍정적인 결과를 얻었다. 이는 본연의 GO 구조에 의한 molecular sieving channel 효과와 CO₂에 친화성이 있는 GO의 구조 내에 존재하는 작용기 그리고 GO를 PEI로 개질함으로써 PEI에 결합되어 있는 amine에 의한 효과가 함께 작용했기 때문으로 생각된다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.106-109
• /
• 2012

A low power methane gas sensor with microheater was fabricated by silicon bulk micromachining technology. In order to heat up the sensing layer to operating temperature, a platinum (Pt) micro heater was embedded in the gas sensor. The line width and gap of the microheater was 20 ${\mu}m$ and 4.5 ${\mu}m$, respectively. Zinc oxide (ZnO) nanowhisker arrays were grown on a sensor from a ZnO seed layer using a hydrothermal method. A 200 ml aqueous solution of 0.1 mol zinc nitrate hexahydrate, 0.1 mol hexamethylenetetramine, and 0.02 mol polyethylenimine was used for growing ZnO nanowhiskers. Temperature distribution of the sensor was analyzed by infrared thermal camera. The optimum temperature for highest sensitivity was found to be $250^{\circ}C$ although relatively high (64%) sensitivity was obtained even at as low a temperature as $150^{\circ}C$. The power consumption was 72 mW at $250^{\circ}C$, and only 25 mW at $150^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.337.2-337.2
• /
• 2016

역 구조 유기태양전지는 가격이 저렴하고 우수한 경량성, 간단한 제조공정 그리고 휘어짐이 가능한 소자를 제작할 수 있는 것이 큰 장점이다. 또한, 광활성층과 전극 사이에 표면개질 물질을 도입하여 에너지장벽을 줄임으로써 소자 전반적인 전하수송을 증가시킬 수 있게 되었다. 나아가 용액공정과 저온 공정을 통해 유기 광전자소자의 roll-to-roll 대면적화 기술을 기반으로 가격대비 성능을 개선시켰다. 본 연구에서는 CdSe 또는 CdSe@ZnS 양자점을 표면개질 유기물질인 polyethylenimine ethoxylated (PEIE)에 정전기적 인력의 결합을 통한 양자점 단일층을 얻었고 이는 전기수송층, 광흡수층 그리고 표면플라즈몬 공명(Surface plasmon resornace)의 역할을 수행하게 되면서 태양전지 전반적인 성능 향상을 관찰 할 수 있었고 양자점 단일층으로 인해 20%가 증가된 에너지변환효율 얻었다. 또한 단일층으로 형성된 CdSe 또는 CdSe@ZnS 양자점 은 $F{\ddot{o}}rster$ resonance energy transfer (FRET) 메커니즘을 통해 PC60BM과 P3HT의 Photo luminescence 세기를 99% 감쇄시켰고, CdSe 양자점을 유기 광활성층인 PTB7:PC71BM에 적용하여 8.1%의 수치를 나타내었다.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.113-119
• /
• 2009

The feasibility of using cork oak bark for phosphorus removal from wastewater was evaluated in this study. Recently, development of more cost-effective media while maintaining high efficiency in pollutants removal has received concern. Barks have a negative surface charge and, hence, tend to show a high affinity to bind cations, and they need to undergo chemical modification to increase their adsorption capacity of anions. Bark was hydrolyzed by HCl solution and it received modification using an aqueous solution of high molecular weight polyethylenimine(PEI). Surface modification with HCl and PEI resulted in a decrease of specific surface area of the bark from $1.932 m^2/g$ to $1.094 m^2/g$. The adsorption experiments were carried out in batch tests and the data were fitted to the Langmuir isotherm and Freundlich isotherm equations. Phosphate removal rate was higher at the lower solution pH possibly due to the form of phosphate ion in solution. For the initial phosphate concentration of 10 mg/L, maximum adsorption was 20.88 mg P/g at pH 3 and 12.02 mg P/g at pH 5. Mechanism of phosphorus sorption onto the HCl-PEI bark was examined through FT-IR spectrometer. Ion exchange between $NH^+$ and $H_2PO_4{^-}$ appeared to be a key mechanism of phosphate adsorption onto the HCl-PEI bark surface.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.19-25
• /
• 2009

In order to enhance the gene delivery efficiency and decrease the cytotoxicity of polyplexes, we synthesized Solutol-g-PEI by conjugating polyethyleneimine (PEI) to Solutol (polyoxyethylene (10) stearate), and evaluated its efficiency as a possible nonviral gene carrier candidate. Structural analysis of synthesized polymer was performed by using $^1H$-NMR. Gel retardation assay, particle sizes and zeta potential measurement confirmed that the new gene carrier formed a compact complex with plasmid DNA. The complexes were smaller than 150 nm, which implicated its potential for intracellular delivery. It showed lower cytotoxicity in three different cell lines (Hela, MCF-7, and HepG2) than PEI 25 kDa. pGL3-lus was used as a reporter gene, and the transfection efficiency was in vitro measured in Hela cells. Solutol-g-PEI showed much higher transfection efficiency than unmodified PEI 25 kDa.

• 센서학회지
• /
• 제19권6호
• /
• pp.462-468
• /
• 2010

A low power gas sensor with microheater was fabricated by MEMS technology. In order to heat up the gas sensing material to a operating temperature, a platinum(Pt) micro heater was built on to the micromachined Si substrate. The width and gap of microheater were $20\;{\mu}m$ and $4.5\;{\mu}m$, respectively. ZnO nanowhisker arrays were fabricated on a sensor device by hydrothermal method. The sensor device was deposited with ZnO seeds using PLD systems. A 200 ml aqueous solution of 0.1 mol zinc nitrate hexahydrate, 0.1 mol hexamethylenetetramine, and 0.02 mol polyethylenimine was used for growthing ZnO nanowhiskers. The power consumption to heat up the gas sensor to a operating temperature was measured and temperature distribution of sensor was analyzed by a Infrared Thermal Camera. The optimum temperature for highest sensitivity was found to be $250^{\circ}C$ although relatively high(64 %) sensitivity was obtained even at as low as $150^{\circ}C$. The power consumption was 72 mW at $250^{\circ}C$ and was only 25 mW at $150^{\circ}C$.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2421-2429
• /
• 2018

Thiol-based self-assembled anchor linked to glucose oxidase (GOx) and gold nanoparticle (GNP) cluster is suggested to enhance the performance of glucose biosensor. By the adoption of thiol-based anchors, the activity of biocatalyst consisting of GOx, GNP, polyethyleneimine (PEI) and carbon nanotube (CNT) is improved because they play a crucial role in preventing the leaching out of GOx. They also promote electron collection and transfer, and this is due to a strong hydrophobic interaction between the active site of GOx and the aromatic ring of anchor, while the effect is optimized with the use of thiophenol anchor due to its simple configuration. Based on that, it is quantified that by the adoption of thiophenol as anchor, the current density of flavin adenine dinucleotide (FAD) redox reaction increases about 42%, electron transfer rate constant ($k_s$) is $9.1{\pm}0.1s^{-1}$ and the value is 26% higher than that of catalyst that does not use the anchor structure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.400.1-400.1
• /
• 2016

Interfacial engineering approaches as an efficient strategy for improving the power conversion efficiencies (PCEs) of inverted polymer solar cells (iPSCs) has attracted considerable attention. Recently, polymer surface modifiers, such as poly(ethyleneimine) (PEI) and polyethylenimine ethoxylated (PEIE), were introduced to produce low WF electrodes and were reported to have good electron selectivity for inverted polymer solar cells (iPSCs) without an n-type metal oxide layer. To obtain more efficient solar cells, quantum dots (QDs) are used as effective sensitizers across a broad spectral range from visible to near IR. Additionally, they have the ability to efficiently generate multiple excitons from a single photon via a process called carrier multiplication (CM) or multiple exciton generation (MEG). However, in general, it is very difficult to prepare a bilayer structure with an organic layer and a QD interlayer through a solution process, because most solvents can dissolve and destroy the organic layer and QD interlayer. To present a more effective strategy for surpassing the limitations of traditional methods, we studied and fabricated the highly efficient iPSCs with mono-layered QDs as an effective multi-functional layer, to enhance the quantum yield caused by various effects of QDs monolayer. The mono-layered QDs play the multi-functional role as surface modifier, sub-photosensitizer and electron transport layer. Using this effective approach, we achieve the highest conversion efficiency of ~10.3% resulting from improved interfacial properties and efficient charge transfer, which is verified by various analysis tools.

• Genomics & Informatics
• /
• 제10권1호
• /
• pp.40-43
• /
• 2012

Recent genomewide association studies of large samples have identified genes that are associated with blood pressure. The Global Blood Pressure Genetics (Global BPgen) and Cohorts for Heart and Aging Research in Genome Epidemiology (CHARGE) consortiums identified 14 loci that govern blood pressure on a genomewide significance level, one of which is $CASZ1$ confirmed in both Europeans and Asians. $CASZ1$ is a zinc finger transcription factor that controls apoptosis and cell fate and suppresses neuroblastoma tumor growth by reprogramming gene expression, like a tumor suppressor. To validate the function of $CASZ1$ in blood pressure, we decreased $Casz1$ mRNA levels in mice by siRNA. $Casz1$ siRNA reduced mRNA levels by 59% in a mouse cell line. A polyethylenimine-mixed siRNA complex was injected into mouse tail veins, reducing $Casz1$ mRNA expression to 45% in the kidney. However, blood pressure in the treated mice was unaffected, despite a 55% reduction in $Casz1$ mRNA levels in the kidney on multiple siRNA injections daily. Even though $Casz1$ siRNA-treated mice did not experience any significant change in blood pressure, our study demonstrates the value of $in$ $vivo$ siRNA injection in analyzing the function of candidate genes identified by genomewide association studies.