• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.727-729
• /
• 2001

The air separation of PET (Polyethylene terephthalate) and PS(Polystyrene) was carried out by taking advantage of the different abrasive resistance of two plastics. PET bottles and PS packages were shredded to small square pieces $(5{\times}5mm)$. Both plastic shreds were treated by a shear-type crusher. The PET shreds were bent and twisted by the crush so that they were blown up easily, but the PS shreds were not. After the crush of mixture of both plastics, air separation experiments were carried out using four types of air separators. The number and location of the baffle attached to them are different. With the separator with a baffle attached at the upper part, PET recoveries for the crushing time of 30, 60 and 90sec were 67, 98 and 99% respectably at the air flow rate of 3.5m/s, whereas PS recoveries were null regardless of the crushing time.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.172-177
• /
• 2004

Biaxially oriented polyethylene terephthalate copolymer(BO - PET)film laminated aluminiums have been applied for chip condenser case. The BO PET film is characterized by high molecular which gives high corrosion resistance, good adhesion and high heat resistance. The higher orientation lowers formability of the film. So, optimum orientation has to be controlled during the laminating process. And to confirm the adhesion between BO PET and aluminium and to guarantee the formability of PET laminated aluminums, we have controlled the chromium oxides weight on the aluminium and laminating condition ( laminating temperature, soaking temperature and lag time after nip roll and quenching conditions) This paper discusses the effect of the laminating conditions on the formability of laminated aluminums. As results, it is clear that the orientation of the BO PET film decreased with an increase in the strip temperature. When the film temperature is over the melting point of the film, its orientation drastically decreased.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.64-71
• /
• 1995

Tests were performed to evaluate the effect of thermal shock behavior on the mechanical properties of PC(poly-carbonate) and PET(polyethylene-terephthalate) with MBS(methylmethacrylate-butadiene-styrene) alloy. Five different material weight fraction for PC/PET were employed : 0/100, 25/75, 50/50, 75/25, and 100/0. Three different weight fraction of MBS were added to each PC/PET : 0, 3, and 9. Therefore fifteen different types of PC/PET/MBS were prepared using single screw extrude. and injection molding machine. One thermal shock cycle consisted of each one hour stay at -$40^{\circ}C$ chamber and $＋80^{\circ}C$ chamber without delay. Specimens were thermal shocked up to 20 and 40 cycles. Specific mechanical properities considered in this study include tensile, izod impact, and high rate Impact behaviors. In addition, the morphology of the fractured surface after Izod impact testing was investigated by the SEM (scanning electron microscope).

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.205-214
• /
• 2022

Research on reducing the thickness of polyethylene terephthalate (PET) bottles is necessary to reduce the amount of plastic used. However, as decreasing a PET bottle's thickness weakens it, a robust bottle design is required. Therefore, in this study, we numerically analyzed various bottom designs of a carbonated soft drink PET bottle with 245 and 500 ml capacities and complicated petaloid shapes. Deformation, equivalent stress, maximum principal stress, and its direction according to each design were analyzed to study the strength of the bottle. The results serve as a reference to design robust petaloid PET bottle bottoms with a reduced thickness for carbonated soft drinks.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.432-437
• /
• 2019

유연전극 기반의 대기압 부유전극 유전체 장벽 방전 (floating electrode-dielectric barrier discharge, FE-DBD) 시스템을 개발하여 플라즈마 특성을 분석하였다. 유연한 파워전극(powered electrode)을 구성하는 유연유전체로 polytetrafluoroethylene (PTFE), polydiemethylsiloxane (PDMS), polyethylene terephthalate (PET)를 사용하여 플라즈마를 발생하였을 때 플라즈마의 광학적 세기와 전자온도는 파워전극에 인가하는 전압이 증가할수록 증가하였고, 전압이 일정할 때는 PTFE < PDMS < PET 순으로 증가하였다. 이는 유전체의 종류와 전압에 따른 축전용량의 변화로 설명할 수 있었고, 유연전극 기반의 대기압 FE-DBD 플라즈마의 특성은 유연한 파워전극을 구성하는 유전체와 파워전극에 인가되는 전압을 변화함으로써 조절될 수 있음을 의미한다. 유연전극 대기압 FE-DBD 시스템은 피부 곡면을 따라 플라즈마가 발생될 수 있으므로 플라즈마 메디신(plasma medicine)에 유용할 것으로 기대한다.

• 공업화학
• /
• 제33권4호
• /
• pp.381-385
• /
• 2022

유해화학물질의 감지 센서 개발을 위해 기재 필름과 전도성 페이스트의 접착 내구성 확보가 매우 중요하다. 본 연구에서는 폴리에틸렌테레프탈레이트(polyethylene terephthalate, PET) 필름에 폴리아닐린/그래핀나노플레이트(graphene nano plate, GNP) 페이스트를 코팅하여 접착 특성을 평가한 결과 cross cut 0B 또는 1B 등급으로 센서 적용에 문제가 있어 에스테르계 바인더를 이용하여 접착 특성 개선 연구를 수행하였다. 에스테르계 바인더가 10 wt% 이상 첨가되면 센서 적용이 가능한 cross cut 등급이 3B 이상을 나타내었다. 바인더의 과량 첨가는 전도성 페이스트의 전기적 특성에 영향을 줄 수 있으며 실제로 황산에 대한 반응성이 감소함을 확인하였다. 전기적 특성 개선을 위해 카본블랙(carbon black, CB) 함량 변화 시험을 수행하였고 CB 2 wt%에서 최적의 전기적 특성을 보임을 확인하였다.

• 한국수산과학회지
• /
• 제55권1호
• /
• pp.73-77
• /
• 2022

The shelf life of oysters Crassostrea gigas, in two different types of packaging containers, polyethylene (PE) and polyethylene terephthalate (PET), was determined by evaluating the pH, glycogen and soluble protein content, turbidity, and viable cell count. After 7 days of storage, the pH of the packing water in the PE container decreased to 5.88, while the pH in the PET container decreased to 6.03. In the PE container, the glycogen content of the oysters decreased by 0.85 g/100 g and the soluble protein content and turbidity of the packing seawater increased by 1,927.21 mg/100 g and 3.24 McF, respectively. In the PET container, the glycogen content of the oysters decreased by 0.96 g/100 g and the soluble protein content and turbidity of the packing seawater increased by 1,674.75 mg/100 g and 0.98 McF, respectively. The reaction rate constants (K) were as follows: glycogen content, -0.18 (PE) and -0.10 (PET); soluble protein content, 0.29 (PE) and 0.26 (PET); and turbidity, 0.41 (PE) and 0.06 (PET). These results suggested that PET can be used as a new packaging container material for raw oysters because the quality is maintained and it offers more convenient handling during distribution.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.100-107
• /
• 2018

본 연구의 목적은 철근콘크리트 휨 부재에 탄소섬유시트, 유리섬유시트, PET(polyethylene terephthalate) 섬유 등을 이용하여 보강했을 때, 보강재 종류, 보강재 물성, 보강량 등에 따른 보강효과를 파악하는 것이다. 변수별 보강효과를 파악하기 위해 가상의 휨부재를 기준실험체로 선정하여, 기준실험체에 대해 항복단면과 극한단면일 때의 모멘트-곡률 관계를 파악하였다. 보강하지 않은 기준실험체에 보강재 종류, 보강재 물성, 보강량 등 다양한 변수를 적용하여 총 11개의 실험체의 모멘트-곡률 곡선을 비교하였다. 분석 결과, 보강하지 않은 실험체에 비해 보강한 실험체의 휨강도는 높게 나타났다. 그러나 연성에 대해서는 보강하지 않은 기준실험체가 가장 우수한 것으로 나타났다. 변수별 휨 보강효과는 보강량이 많고, 파괴시 재료강도가 높을수록 우수하게 나타났으며, 연성효과는 보강재의 파괴시 변형률이 높을수록 우수한 것으로 나타났다. 손상 전과 손상 후의 보강효과에 대해서는 휨보강 효과와 연성효과 모두 10% 이내로 미미하게 나타나 손상상태에 있더라도 온전한 상태로 해석해도 큰 차이가 없을 것으로 판단된다.

• 생태와환경
• /
• 제52권1호
• /
• pp.28-39
• /
• 2019

This study was conducted to elucidate microplastics detection of freshwater ecosystems in Geum river. Samples are collected at 6 points in freshwater, 5 points in fishes. Freshwater was sampled 100 L per each points and fish species were Opsariichthys uncirostris amurensis, Hemibarbus labeo, Pseudogobio esocinus, Zacco platypus, Micropterus salmoides and Cyprinus carpio. FTIR analyis was adopted to identify microplastic types. Extracted microplastics were PES (polyester), PE (polyethylene), PP (polypropylene), PET (polyethylene terephthalate), PVC(Polyvinyl chloride) in freshwater, and PES, PE, PP, PET, PVC in fishes. Our results were expected to be used basic research information for further study in microplastics of freshwater ecosystems.

• Journal of Electrochemical Science and Technology
• /
• 제2권1호
• /
• pp.51-56
• /
• 2011

We develop a new nonwoven composite separator for a safer lithium-ion battery, which is based on coating of silica ($SiO_2$) colloidal particles/styrene-butadiene rubber (SBR) binder to a poly(ethylene terephthalate) (PET) nonwoven support. The $SiO_2$ particles are interconnected by the SBR binder and closely packed in the nonwoven composite separator, which thus allows for the development of unusual porous structure, i.e. highly-connected interstitial voids formed between the $SiO_2$ particles. The PET nonwoven serves as a mechanical support that contributes to suppressing thermal shrinkage of the nonwoven composite separator. The $SiO_2$/SBR content in the nonwoven composite separators plays an important role in determining their separator properties. Porous structure, air permeability, and electrolyte wettability of the nonwoven composite separators, in comparison to a commercialized polyethylene (PE) separator, are elucidated as a function of the $SiO_2$/SBR content. Based on this understanding of the nonwoven composite separators, the effect of $SiO_2$/SBR content on the electrochemical performances such as self-discharge, discharge capacity, and discharge C-rate capability of cells assembled with the nonwoven composite separators is investigated.