• 제목/요약/키워드: polyethylene oxide

검색결과 186건 처리시간 0.029초

기능성 고분자를 이용한 수식 셀룰라아제의 폐 신문용지 탈묵에 관한 연구 (Deinking process of Old Newsprint(ONP) by using Modified Cellulase with synthesized copolymer)

  • 김홍현;곽태헌;박진원;박귀남
    • 청정기술
    • /
    • 제10권4호
    • /
    • pp.195-201
    • /
    • 2004
  • 기능성 고분자와 셀룰라아제가 화학적으로 결합된 수식 셀룰라아제를 이용하여 폐신문용지(Old Newsprint, ONP)의 탈묵공정에 적용하였다. 수식 셀룰라아제 중의 셀룰라아제는 섬유의 피브릴화(fibrillation)를 촉진시켜 잉크입자의 박리를 향상시켰으며, 수식 셀룰라아제 중의 수식 고분자가 탈묵공정에서 분리된 잉크입자를 부상제거하는 새로운 탈묵 공정이 완성되었다. 수식 셀룰라아제를 이용한 공정은 극소량의 수식 셀룰라아제의 사용으로 인장강도, 백감도(brightness), 백색도(whiteness)를 포함한 물리적 성질을 기존 탈묵공정에서의 그것보다 향상시켰다. 잉크와 섬유의 결합은 저장 기간이 증가함에 따라 더욱 강해지고, 기존의 방법으로는 잉크입자 제거가 어려운 반면, 수식 셀룰라아제를 이용한 공정은 잉크입자 제거에 매우 탁월한 효과를 나타내었고, 약 1년간의 보존 기간을 가진 폐신문용지의 탈묵 효과를 41% 향상시켰다. 또한 이 공정은 황변현상을 제거했으며, 섬유의 피브릴화를 촉진시켜 재생지의 물리적 성질인 인장강도와 내부결합도를 향상시켰다.

  • PDF

PET 기판 위에 증착된 ZnO:Al 투명 전도막의 전기적 특성에 미치는 바이어스전압의 효과 (Effective of bias voltage as electrical property of ZnO:Al transparent conducting films on polyethylen terephthalate substrate)

  • 박병욱;;성열문;곽동주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1260-1261
    • /
    • 2008
  • Aluminium doped zinc oxide (ZnO:Al) thin film has emerged as one of the most promising transparent conducting electrode in flat panel displays(FPD) and in photovoltaic devices since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r.f. magnetron sputtering method. Wide ranges of bias voltage, -30V${\sim}$45V, was applied to the growing films as an additional energy instead of substrate heating, and the effect of positive and negative bias on the film structure and electrical properties of ZnO:Al films was studied and discussed. The results showed that a bias applied to the substrate during sputtering contributed to the improvement of electrical properties of the film by attracting ions and electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO film on the substrate, resulting in significant variations in film structure and electrical properties. The film deposited on the PET substrate at r. f. discharge power of 200 W showed the minimum resistivity of about $2.4{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 87%.

  • PDF

그래핀 투명전도막의 전기적 특성에 미치는 Strain 영향

  • 이병주;정구환
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.462-462
    • /
    • 2011
  • 그래핀은 탄소원자로 구성된 원자단위 두께의 매우 얇은 2차원의 나노재료로서 높은 투광도 뿐만 아니라 우수한 기계적, 전기적 특성을 지니며 구조적 화학적 으로도 매우 안정한 것으로 알려져 있다. 이러한 그래핀을 얻는 방법에는 물리·화학적 박리법, 탄화규소의 흑연화, 열화학기 상증착법(thermal chemical vapor deposition; TCVD)등 많은 방법들이 존재한다. 이중 TCVD방법이 대면적으로 두께균일도가 높은 그래핀을 얻는데 가장 적합한 방법으로 알려져 있다. 한편 그래핀은 우수한 특성들을 기반으로 센서나 메모리와 같은 기능성 소자로 응용이 가능할 뿐 아니라 투명고분자 기판으로 전사함으로서 유연성 투명전극을 제작 가능하여 기존의 인듐산화물(indium tin oxide; ITO) 투명전극을 대체하여 디스플레이, 터치스크린, 전·자기 차폐재 등의 다양한 분야로의 응용이 가능하다고 예측되고 있다. 본 연구에서는 TCVD법을 이용하여 대면적으로 두께균일도가 높은 그래핀을 합성하여 투명 고분자 기판(polyethylene terephthalate; PET) 위에 전사하여 투명전도막을 제작한 후, 압축변형률(compressive strain)의 변화에 따른 전기적 특성 변화를 측정하였다. 그래핀은 300 nm 두께의 니켈박막이 증착된 산화물 실리콘 기판위에 원료가스로 메탄(CH4)을 사용하여 합성하였다. 합성 결과 단층 그래핀의 면적은 약 80% 이상이었으며, 합성된 그래핀은 분석의 용이함 및 향후 다양한 응용을 위하여 식각공정을 통해 산화막 실리콘 기판과 PET기판으로 전사하였다. PET기판 위로 전사하여 제작한 그래핀 투명전도막의 strain 인가에 따른 전기적 특성을 관찰한 결과, 약 20%의 비교적 높은 strain하에서도 전기적특성이 크게 변화하지 않는 것을 확인하였다. 그래핀의 특성분석을 위해서는 광학현미경, 라만 분광기, 투과전자현미경, 자외 및 가시선 분광광도계, 4탐침측정기 등을 이용하였다.

  • PDF

스퍼터링을 이용한 ITO 박막의 저온 증착

  • 장승현;이영민;양지훈;정재인
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.263-263
    • /
    • 2010
  • 투명도전막(indium tin oxide; ITO)은 투명하면서도 전기 전도도가 높기 때문에, 액정표시소자(LCD; Liquid Crystal Display), 전자발광소자(ELD; Electroluminescent Display) 및 전자 크로믹 소자(Electrochromic Display)를 포함하는 평판형 표시 소자(FPD; Flat Panel Display)와 태양전지 등에 이용되고 있다. 낮은 비저항과 높은 투과율의 ITO 박막은 $300^{\circ}C$ 이상의 고온에서 코팅해야 하는 것으로 알려져 있다. 그러나 최근 플라스틱과 같은 연성 소자가 전자부품에 널리 이용되면서 ITO를 저온에서 증착해야할 필요성이 대두되고 있다. 본 연구에서는 ITO를 플라스틱에 적용하기 위한 저온 코팅 공정 및 시편의 전 후처리공정을 개발하여 박막의 특성을 알아보고자 한다. 실험에 사용된 기판은 고투과율의 고분자(polyethylene terephthalate; PET) 필름이며 $5\;{\times}\;10\;cm^2$의 크기로 절단하여 알코올로 초음파 세척을 실시하였고, 진공 용기에 장입한 후 펄스전원을 이용하여 3분간 in-situ 청정을 실시하였다. ITO 코팅은 마그네트론 스퍼터링을 이용하였으며, 코팅시간, 전처리, 후처리, 기판온도, 산소유량 등 코팅 조건에 따른 박막의 특성을 조사하였다. ITO 박막의 코팅 조건에 따른 박막의 결정구조 분석은 x-선 회절(x-ray diffraction; XRD)을 이용하였고, 박막의 표면형상과 두께 보정 및 단면의 미세조직과 결정 성장 여부 등은 투과전자 현미경(transmission electron microscope; TEM)을 이용하여 분석하였다. 또한 ITO 박막의 면저항과 분광특성은 four-point Probe (CMP-100MP, Advanced Instrument Technology), spectrophotometer (UV-1601, SHIMADZU)를 이용하여 측정하였다. ITO 박막의 광학특성 분석 결과 전광선 투과율은 두께에 따라 변화 하였지만, 색차와 Haze 값은 증착 조건에 따라 큰 차이는 보이지 않았다. 그리고 박막의 결정화에 영향을 주는 가장 중요한 인자는 기판온도이지만, 기판온도를 높이지 못할 경우 비평형 마그네트론(unbalanced-magnetron; UBM)에 의해서 플라즈마 밀도를 높이는 방법으로 유사한 효과를 얻을 수 있음을 확인하였다.

  • PDF

전자선 조사를 통한 염료감응형 태양전지의 분해 연구 (Application of electron beam irradiation for studying the degradation of dye sensitized solar cells)

  • Akhtar, M.Shaheer;Lee, Hyun-Cheol;Min, Chun-Ji;Khan, M.A.;Kim, Ki-Ju;Yang, O-Bong
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.179-182
    • /
    • 2006
  • The effect of electron beam irradiation on dye sensitized solar cell (DSSC) has been studied to examine degradation of DSSC. The high-energy electron beam irradiation affects on the materials and performance of dye sensitized solar cells. We have checked the effects of electron beam irradiation of $TiO_2$ substrate with and without dye adsorption on the photovoltaic performances of resulting DSSCS and also studied the structural and electrical properties of polymers after irradiation. All solar cells materials were irradiated by electron beams with an energy source of 2MeV at different dose rates of 60 kGy, 120 kGy 240 kGy and 900 kGy and then their photoelectrical parameters were measured at 1 sun $(100 mW/cm^2)$. It was shown that the efficiency of DSSC was decreased as increasing the dose of e-beam irradiation due to lowering in $TiO_2$ crystallinity, decomposition of dye and oxidation of FTO glasses. On the other hand, the performance of solid-state DSSC with polyethylene oxide based electrolyte was improved after irradiation of e-beam due to enhancement of its conductivity and breakage of crosslinking.

  • PDF

PEG-free 계면활성제를 사용한 Nanoemulsion의 안정화 (Stabilization of Nanoemulsion Using PEG-free Surfactant)

  • 김희주;정택규;김자영;윤경섭
    • 한국응용과학기술학회지
    • /
    • 제36권2호
    • /
    • pp.434-447
    • /
    • 2019
  • 폴리에틸렌글라이콜(PEG)은 계면활성제, 세정제, 유화제 등으로 화장품에 많이 사용된다. 이들은 제조 과정 중, ethylene oxide의 이량체화에 의해 인간에 몸에 유해한 1,4-dioxane이 부산물로 생성될 수 있다. 화장품 성분에 대한 소비자들의 관심이 증가함에 따라, 퍼스널케어 시장에서 PEG 성분이 없는 보다 안전한 에멀젼 연구의 필요성이 증대되고 있다. PEG-free 계면활성제로 사용되는 polyglycerol ester (PGE)는 비이온성 계면활성제로서 식품, 화장품 등의 분야에서 많이 사용되며 글리세롤과 지방산을 에스테르화 하여 생산된다. 본 연구에서는 PEG 성분을 함유하지 않은 나노에멀젼 제형의 개발 및 안정화를 목표로 하였다. 최적화된 나노에멀젼 제형 개발을 위해 RSM (Response Surface Methodology)를 사용하였다. 독립변수 및 변수의 범위 결정을 위한 예비 실험의 결과로 계면활성제 함량(2~4%), 오일 함량(4~8%), 폴리올 함량(12~24%)을 독립변수로 설정하였다. 반응변수로는 제형의 입자 크기(particle size), 제타 전위(zeta potential), 현탁도(turbidity), 다분산지수(polydispersity index)를 측정하였다. 제조한 나노에멀젼을 FIB (Focused ion beam)로 측정한 결과, 구형의 입자들이 100~200 nm의 크기를 가지고 분포되어 있는 것을 확인하였다. 제조된 제형에 대해 30일 간 각 온도별($4^{\circ}C$, $25^{\circ}C$, $45^{\circ}C$) 안정성 평가를 진행하였고, 최적의 입자 크기, 현탁도, 다분산지수, 제타 전위를 고려한 최적의 처방은 계면활성제(2%), 오일(8%), 폴리올(24%)로 확인되었다.

산초(Zanthoxylum schinifolium) 추출물과 초피(Zanthoxylum piperitum) 정유의 꽁치과메기 산패 억제 효과 (Suppressive Effects of the Extract of Zanthoxylum schinifolium and Essential Oil from Zanthoxylum piperitum on Pacific Saury, Coloabis saira Kwamegi)

  • 조성희;권은혜;오승희;우미희
    • 한국식품영양과학회지
    • /
    • 제38권12호
    • /
    • pp.1753-1759
    • /
    • 2009
  • 본 연구는 산초 잎의 에탄올 추출물과 초피 과피에서 얻은 정유를 과메기 제조 시 처리하였을 때 산패 억제와 품질 향상 효과를 조사하였다. 산초의 에탄올 추출물(ZS)은 1% 에탄올에, 초피 정유(ZP)는 20% 에탄올에 용해시켜 길이로 2등분하여 탈수시킨 꽁치 1 kg 당 산초 추출물은 0, 0.125, 0.25, 1 ppm 되게, 초피 정유는 0, 0.25, 0.5, 1, 2 ppm 되게 분무하여 과메기를 자연 건조하여 제조하고 다층 필름포장제로 진공 포장하였다. 포장된 과메기를 실험 시까지 -20${^{\circ}C}$에 보관하였다가 개봉한 후 4${^{\circ}C}$ 냉장고에서 1, 3, 7일 보관하며 산패 정도와 아민류의 변화, 관능검사를 실시하였다. 과메기의 산가, 과산화물가 및 TBA값은 개봉 후 보관기간이 길어질수록 증가하였으며 산초 추출물 0.125 ppm 이상, 초피 정유 0.25 ppm에서 효과가 나타났으며 이 효과는 농도 의존적이며 보관기간이 길어질수록 더 뚜렷하였다. 산초 추출물과 초피 정유 처리에 의하여 과메기 내의 dimethylamine과 trimethylamine(TMA)의 증가도 억제하였으며 trimethylamine oxide의 함량은 높게 유지되었고 3일 보관한 과메기에서 TMA<4.5 mg/100 g을 유지시킬 수 있는 산초 추출물의 농도는 0.25 ppm, 초피 정유는 0.5 ppm이었다. 3일 보관된 과메기에 대한 관능검사 결과 초피정유를 0.5-1ppm 처리한 시료에서 가장 좋은 점수를 나타내었다. 결론적으로 소량의 산초추출물과 초피 정유는 과메기의 산패를 억제하여 품질을 개선시키는 효과가 있다고 사료된다.

폴리에틸렌 멀칭재배시(栽培時) 농약(農藥)의 토양(土壤) 및 작물체중(作物體中) 잔류(殘留)에 관한 연구(硏究);제(第)3보(報) 토양살충제 Endosulfan, Fonofos, Ethoprophos의 잔류성(殘留性) (Studies on Persistence of Pesticides in Soils and Crops under Polyethylene Film Mulching Culture;III. Persistence of Soil Insecticides Endosulfan, Fonofos and Ethoprophos)

  • 양환승;문영희;김낙응
    • 한국환경농학회지
    • /
    • 제7권1호
    • /
    • pp.8-13
    • /
    • 1988
  • 폴리에틸렌(P.E.)필름 피복재배조건하(被覆栽培條件下)의 고추, 땅콩, 참깨포장(圃場)에 있어서 endosulfan, fonofos, ethoprophos의 잔류성(殘留性)을 로지조건(露地條件)과 비교조사(比較調査)한 결과(結果)는 다음과 같다. 토양중(土壤中)에서 endosulfan, fonofos, ethoprophos의 분해(分解)는 양조건하(兩條件下)에서 1차반응식(次反應式)에 따랐다. 토양중(土壤中) 잔류기간(殘留期間)은 유기인계(有機燐系)인 fonofos(반감기(半減期) : $19{\sim}21$일(日))와 ethoprophos(반감기(半減期) : $25{\sim}37$일(日))보다 유기염소계(有機鹽素系)인 endosulfan(반감기(半減期) : ${\alpha}-$이성체(異性體) ; $33{\sim}39$일(日), ${\beta}-$이성체(異性體) ; $56{\sim}81$일(日))이 길었으며, 특히 ${\beta}-$이성체(異性體)에서의 잔류기간(殘留期間)이 현저(顯著)히 길었다. P.E. 피복조건(被覆條件)과 로지조건(露地條件)에서 fonofos의 반감기(半減期)는 거의 차이(差異)가 없었다. 그러나 ${\alpha}-endosulfan$과 ethoprophos는 반감기(半減期)가 각각 6日(일)과 12日(일), ${\beta}-endosulfan$의 경우는 반감기(半減期)가 약(約) 52日(일)이 P.E. 피복조건하(被覆條件下)에서 더 길었다. P.E. 피복(被覆)이 분해(分解)에 미치는 영향(影響)은 분해속도(分解速度)가 느린 농약(農藥)일수록 더 컸다. P.E. 피복(被覆)의 유무(有無)에 관계(關係)없이 endosulfan은 관계(關係)된 고추에서 관계(關係)되지 않았고, 참깨중에(中)서 검출(檢出)된 ethoprophos의 잔류량(殘留量)(투명(透明) P.E. 피복조건(被覆條件) : 0.024ppm, 로지조건(露地條件) : 0.074ppm)과 땅콩중(中)에서 검출(檢出)된 fonofos의 잔류량(殘留量)(투명(透明) P.E. 피복조건(被覆條件) : 0.078ppm, 로지조건(露地條件) : 0.017ppm)도 매우 낮았다.

  • PDF

냉동연육 원료로서연근해산 어류의 가공적성 검사연구 (Sthdies on the Adaptability for Frozen fish Meat Paste Processing of the Fishes Cought in korean coastal Off-Shore Sea)

  • 류지동;이성갑
    • 기술사
    • /
    • 제32권4호
    • /
    • pp.104-118
    • /
    • 1999
  • Alaska Pollack (Theragramma), Mackerel (Socomber japonicus), yellow corvenia (Pseudosc iance manchurica) were dressed, and then meat was separated from the other parts through a fish meat separator. After dehydration, the meat was ground with a silent cutter, packaged in polyethylene bags, and stored at -15。C for days. Samples were taken at regular intervals throughout the storage period and investigated for changes in puality characteristics such as the amounts of nitrogenous compounds, degree of lipid oxidation, fatty acid composition, and organoleptic factors. The resrlts obtained in this study were as follows; 1. The volatile basic nitrogen[VBN] contents of Alaska pollack, and yellow corvenia meat pastes increased from 14.4, 11.2 and 10.8mg% to 41.6, 38.3 and 40.6mg%, respectively during a 120 day storage period, whereas the trimethylamine oxide nitrogen [TMAO-N] contents decreased from 117.2, 12.8 and 17.2mg% to 40.3, 2.6 and 7.1mg% during the same period. 2. The TBA value of the mackerel meat paste showed a maximum peak after 60 days, and then decreased gradually, whereas the TBAvalues of the alaska pollack and yellow corvenia meat pastes increased steadily during the same period. The acid values of the meat pastes increased during the storage period, while the iodine values decreased. 3. The fatty acid composition of the total lipid of the meat pastes changed considerably during ghe 120 days storage period : saturated fatty acids in the total lipid such as myristic, palmitic, and stearic acid increased, while unsaturated fatty acids such as linoleic, gadoleic, eicosapentaenoic, erucic and docosahexaenoic acid decreased steadily. The initial percentage contents of the unsaturated fatty acids in the total lipid of the Alaska pollack, mackerel, and yellow corvenia meat pastes were 87.2%, 63.9%, and 75.9% respectively. However, the contents decreased to 46.0%, 42.5% and 51.3% after the 120day storage period. 4. The color of the meat pastes changde gradually into dark brown. L values of the meat paste measured with a thistimulus colorimeter decreased steadily during the storage period, while a and b values increased during same period. 5. Judging from the results of organoleptic evaluation on the fish odor, color and overall acceptability, significant difference were found between the odor and color of the mackerel and those of the yellow corvenia meat pastes. Overall acceptability score of yellow corvenia was higher than that of Alaska pollack or mackerel meat pastes.

  • PDF

저온 경화형 초친수성 티타니아 하이브리드 졸의 제조와 친수성 특성 평가에 관한 연구 (Superhydrophilicity of Titania Hybrid Coating Film Imposed by UV Irradiation without Heat-treatment)

  • 김원수;박원규
    • 대한치과기공학회지
    • /
    • 제29권1호
    • /
    • pp.121-131
    • /
    • 2007
  • A preparation process's conditions of aqueous sol which contains anatase-type nano titania particles with photocatalyic properties was established by using Yoldas process, so called, DCS(Destabilization of Colloidal Solution) process in this study. And crystal size change and phase transformation of titania particles in aqueous titania sol depending on reaction conditions was investigated by a light scattering method and XRD analysis of frozen dried powders, respectively. This sol with photo catalytic nano titania particles was used to the following hydrophilic hybrid coating film's fabrication and its properties was evaluated. Subsequently, for coating film using the above mentioned aqueous titania sol, non-aqueous titania sol was prepared without any chemical additives and its time stability according to aging time was investigate. By using the above mentioned aqueous titania sol and non-aqueous sol, a complex oxide coating sol for metal and ceramic substrate and a organic-inorganic hybrid coating sol for polymer substrate was prepared and it's hydrophilicity depending on UV irradiation conditions was evaluated. As a conclusions, the following results were obtained. (1)Aqueous titania sol The average particle size of titania in formed aqueous titania sol was distributed between 20$\sim$90nm range depending on reaction conditions. And the crystal phase of titania powders obtained by frozen drying method was changed from amorphous state to anatase and subsequently transformed to rutile crystal phase and it is attributed to concentration gradient in aqueous sol. (2)Non-aqueous titania sol Non-aqueous titania sol was prepared using methanol as a solvent and a little distilled water for hydrolysis and nitric acid as a catalyst were used. The obtained non-aqueous titania sol was stable at room temperature for 20 days. Additionally, non-aqueous titania sol with addition of chealating reagent such as acethylaceton and ethylene glycol prolonged the stability of sol by six months. (3)Complex sol and hybrid sol with super hydrophilicity The above mentioned aqueous titania sol as a main photocataylic component and non-aqueous titania sol as a binder for coating process was used to prepare a complex sol used for metal, ceramic and wood material substrate and also to prepare the organic-inorganic hybrid sol for polymer substrate such as polycarbonate and polyethylene, in which process APMS(3-Aminopropyltrimethoxysilane), GPTS(3-Glycidoxypropyl-trimethoxysilane) as a hydrophilic silane compound and HEMA(2-Hydroxyethyl methacrylate) as a forming network in hybrid coating film were used. The hybrid coating film such as prepared through this process showed a superhydrophilicity below 1$10^{\circ}$ depending on processing conditions and a pencil's hardness over 6 H.

  • PDF