• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.348-348
• /
• 2016

Low dark current (off-current) and high photo current are both essential for a solution processed organic photodetector (OPD) to achieve high photo-responsivity. Currently, most OPDs utilize a bulk heterojunction (BHJ) photo-active layer that is prepared by the one-step deposition of a polymer:fullerene blend solution. However, the BHJ structure is the main cause of the high dark current in solution processed OPDs. It is revealed that the detectivity and spectral responsivity of the OPD can be improved by utilizing a photo-active layer consisting of an interdiffused polymer/fullerene bilayer (ID-BL). This ID-BL is prepared by the sequential solution deposition (SqD) of poly(3-hexylthiophene) (P3HT) and [6,6] phenyl C61 butyric acid methyl ester (PCBM) solutions. The ID-BL OPD is found to prevent undesirable electron injection from the hole collecting electrode to the ID-BL photo-active layer resulting in a reduced dark current in the ID-BL OPD. Based on dark current and external quantum efficiency (EQE) analysis, the detectivity of the ID-BL OPD is determined to be $7.60{\times}1011$ Jones at 620 nm. This value is 3.4 times higher than that of BHJ OPDs. Furthermore, compared to BHJ OPDs, the ID-BL OPD exhibited a more consistent spectral response in the range of 400 - 660 nm.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.69.1-69.1
• /
• 2010

We have fabricated organic photovoltaic cells (OPVs) with highly conductive poly 3,4-ethylenedioxythiophene : poly styrenesulfonate (PEDOT:PSS) layer as an anode without using transparent conducting oxide (TCO), which has been modified by adding some organic solvents like sorbitol (So), dimethyl sulfoxide (DMSO), N-methyl-pyrrolidone (NMP), dimethylformamide (DMF), and ethylene glycol (EG). The conductivity of PEDOT:PSS film modified with each additive was enhanced by three orders of magnitude. According to atomic force microscopy (AFM) study, conductivity enhancement might be related to better connections between the conducting PEDOT chains. TCO-free solar cells with modified PEDOT:PSS layer and the active layer composed of poly(3-hexylthiophene) (P3HT) and phenyl [6,6] C61 butyric acid methyl ester (PCBM) exhibited a comparable device performance to indium tin oxide (ITO) based organic solar cells. The power conversion efficiency (PCE) of the organic solar cells incorporating DMSO, So + DMSO and EG modified PEDOT:PSS layer reached 3.51, 3.64 and 3.77%, respectively, under illumination of AM 1.5 (100mW/$cm^2$).

• 한국재료학회지
• /
• 제29권2호
• /
• pp.87-91
• /
• 2019

We report on stretchable electrochromic films of poly(3-hexylthiophene) (P3HT) fabricated on silver nanowire (AgNW) electrodes. AgNWs electrodes are prepared on polydimethylsiloxane (PDMS) substrates using a spray coater for stretchable electrochromic applications. On top of the AgNW electrode, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is introduced to ensure a stable resistance over the electrode under broad strain range by effectively suppressing the protrusion of AgNWs from PDMS. This bilayer electrode exhibits a high performance as a stretchable substrate in terms of sheet resistance increment by a factor of 1.6, tensile strain change to 40 %, and stretching cycles to 100 cycles. Furthermore, P3HT film spin-coated on the bilayer electrode shows a stable electrochromic coloration within an applied voltage, with a color contrast of 28.6 %, response time of 4-5 sec, and a coloration efficiency of $91.0cm^2/C$. These findings indicate that AgNWs/PEDOT:PSS bilayer on PDMS substrate electrode is highly suitable for transparent and stretchable electrochromic devices.

• Advances in Energy Research
• /
• 제4권4호
• /
• pp.275-284
• /
• 2016

In the present work, ZnO nanoparticles (NPs) have been dispersed alone in the same solvent of the active layer for improving performance parameters of the organic solar cells. Different concentrations of the ZnO NPs have been blended inside active layer of the solar cell based on poly(3-hexylthiophene) (P3HT), which forms the hole-transport network, and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which forms the electron-transport network. In the present investigations, the ZnO NPs may represent an efficient tool for improving light harvesting through light scattering inside active layer, electron mobility, and electron acceptance strength which tend to improve photocurrent and performance parameters of the investigated solar cell. The fill factor (FF) of the ZnO-doped solar cell increases nearly 14% compared to the non-doped solar cell when the doping is 50%. The present investigations show that ZnO NPs improve power conversion efficiency of the solar cell from 1.23% to 1.64% with increment around 25% that takes place after incorporation of 40% as a volume ratio of the ZnO NPs inside P3HT:PCBM active layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.444-444
• /
• 2008

For the polymer tandem cell, simple and advantaged solution-based method to electron transport intermediate layer is presented which are composed $TiO_2$ nanoparticles. Device were based on a regioregular Poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl $C_{61}$ butyric acid methyl ester($PC_{60}BM$) blend as a donor and acceptor bulk-heterojunction. For the middle electrode interlayer, the $TiO_2$ nanoparticles were well dispersed in ethanol solution and formed thin layer on the P3HT:PCBM charge separation layer by spin coating. The layer serves as the electron transport layer and divides the polymer tandem solar cell. The open-circuit voltage (Voc) for the polymer tandem solar cells was closed to the sum of those of individual cells.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.15-19
• /
• 2012

Presented herein are the results of the study that was conducted on the electrical characteristics of organic field-effect transistors based on poly(3-hexylthiophene), particularly the thickness and annealing temperature of their active layer is varied. The changes in field-effect mobility and current on/off ratio were explored. It was observed that both increasing annealing temperature from $60^{\circ}C$ to $100^{\circ}C$ and various concentrations influence the trade-off relations between the mobility and current on/off ratio. The surface morphology of the 2-${\mu}m^2$ area with various thicknesses was scanned via atomic-forcemicroscopy(AFM) to verify the relationship between surface morphology, which is related to the thickness of the film, and device performance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.385-385
• /
• 2011

Si 또는 반도체 화합물을 기반으로 한 태양전지의 높은 원재료 가격과 복잡한 공정 등의 문제점들을 해결하기 위한 방안으로 반도체성 고분자인 Poly(3-hexylthiophene)(P3HT)과 C60 유도체인 PCBM을 광활성 층으로 이용하여 유기 태양전지(Organic Solar Cell, OSC)를 제작하였다. 하지만 상대적으로 낮은 효율을 갖는 OSC의 단점을 해결하기 위해서 유기물 자체가 갖고 있는 광 안정성, 낮은 전하 이동도 및 광 에너지 흡수대 등의 문제점들의 해결 방안들이 제시되고 있다. 본 연구에서는 광활성 층을 사용한 유기 태양전지의 특성에서 후열처리에 따른 유기 태양전지의 전기적 및 구조적, 광학적인 특성들이 소자의 효율에 끼치는 영향에 대해 분석하였다. 후열 처리 온도에 따른 광활성 층의 구조적인 특성을 분석하기 위해 EFM 이미지와 XRD패턴을 측정하였는데 열처리 후 박막의 전기적인 포텐셜과 결정성 향상의 유기 태양전지의 효율향상에 기여함을 알 수 있었다. 또한 임피던스 분석 장치를 이용해 후열 처리에 따른 소자의 Resistance, Capacitance, I-V 곡선들을 분석한 결과 최적의 조건에서 열처리된 광활성 층은 전하들의 이동을 조절하여 소자 내에서 Capacitance를 증가시키는 것 뿐만 아니라 전극과 유기물 층 사이의 계면 특성을 향상시킴으로써, 소자의 효율을 증가시키는 원인으로 작용함을 확인 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.457-458
• /
• 2008

본 연구에서는 PCBM([6，6]-Phenyl $C_{61}$ butric acid methyl ester)과 P3HT(Poly(3-hexylthiophene-2,5-diyl (regiorandom))의 Donor, Acceptor 물질을 이용하여 스핀코팅법을 사용하여 PEDOT가 코팅된 ITO 유리기판에 스핀 코팅법을 사용하여 광활성층을 증착하였다. 이렇게 코팅된 유리기판에 열 증착법 사용하여 Al(cathode층)전극을 증착하여 유기태양전지를 제작하였다. 각각의 층에 대해서 SEM(전자주사현미경)을 이용하여 두께를 측정하였고 UV분광계를 이용하여 투과도를 측정하고 투과도를 이용하여 광학적 밴드갭을 계산하였다. ITO/PEDOT/ACTIVE AREA/Al 구조의 태양전지를 제작하여 광활성층의 두께와 Al의 두께에 따른 효율성을 측정하여 1% 이내의 효율을 보이는 태양전지를 제작하였다. PEDOT는 OLED에서 HTL층으로 사용되며 흘의 이동을 원활하게 해주는 역할을 한다.

• 센서학회지
• /
• 제33권1호
• /
• pp.7-11
• /
• 2024

Soft-pressure sensors have numerous applications in soft robotics, biomedical devices, and wearable smart devices. Herein, we present a highly sensitive electronic skin device with an isotropic wrinkled pressure sensor. A conductive ink for soft pressure sensors is produced by a solution process using polydimethylsiloxane (PDMS), poly 3-hexylthiophene (P3HT), carbon black, and chloroform as the solvents. P3HT provides high reproducibility and conductivity by improving the ink dispersibility. The conductivity of the ink is optimized by adjusting the composition of the carbon black and PDMS. Soft lithography is used to fabricate a conductive elastic structure with an isotropic wrinkled structure. Two conductive elastic structures with an isotropic wrinkle structure is stacked to develop a pressure sensor, and it is confirmed that the isotropic wrinkle structure is more sensitive to pressure than when two elastic structures with an anisotropic wrinkle structure are overlapped. Specifically, the pressure sensor fabricated with an isotropic wrinkled structure can detect extremely low pressures (1.25 Pa). Additionally, the sensor has a high sensitivity of 15.547 kpa^-1 from 1.25 to 2500 Pa and a linear sensitivity of 5.15 kPa^-1 from 2500 Pa to 25 kPa.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.489-492
• /
• 2004

In this paper, we demonstrate polymer thin-film transistors (TFTs) on a paper-based flexible substrate. As a substrate, commercially available photo-paper is used with Parylene coating. The parylene layer enables conventionally used wet chemical process and vacuum deposition processes for electrodes and gate insulator. As an active channel layer, we used poly-3-hexylthiophene (P3HT) which is solution process. Field effect mobility up to $(0.06 {\pm} 0.02) cm^2/Vs$ and on/off ratio of $10^3 {\~}10^4$ are achieved on a photo-paper.