• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.588-592
• /
• 1995

Fed-batch fermentation was used to produce the high concentrations of poly-$\beta $-hydroxybutyrate (PHB) and poly-$\beta $-(hydroxybutyrate-co-hydroxyvalerate) (PHB/V). Specific growth rate ($\mu $), yield of cell from glucose (Y$_{x/s}$) were calculated from the two samples in 3 to 5 hours of interval and they were reflected on the determination of glucose feeding rate to maintain the glucose concentration at around 10 g/l in the culture broth. PHB was accumulated after the nitrogen became limited at 60 g/l of dry cell weight by changing ammonia water to 4N-NaOH solution. As results, the final dry cell weight (DCW) of 170 g/l, PHB of 115 g/l were obtained in 50 hours and the overall productivity was 2.4 g/l$\cdot $h. After PHB accumulation, cosubstrate of glucose and propionic acid (PA) was fed to accumulate PHB/V. But, PA feeding rate was decreased from 3 g/l$\cdot $h to 1 g/l$\cdot $h to prevent PA from accumulating to high level in the broth, which is very inhibitory to the cells. As results, DCW, PHB and PHV were 147.5 g/l, 90 g/l and 8 mole % of hydroxyvalerate, respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.540-545
• /
• 2005

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters, with 3-hydroxyvalerate (3HV) contents ranging from 17 to 60 mol%, were produced by Alcaligenes sp. MT-16, and their biocompatibility evaluated by the growth of Chinese hamster ovary (CHO) cells and the adsorption of blood proteins and platelets onto their film surfaces. The number of CHO cells that adhered to and grew on these films was higher with increasing 3HV content. In contrast, the tendency for blood proteins and platelets to adhere to the copolyester surfaces significantly decreased with increasing 3HV content. Examination of the surface morphology using atomic force microscopy revealed that the surface roughness was an important factor in determining the biocompatibility of theses copolyesters. The results obtained in this study suggest that poly(3HB-co-3HV) copolyesters, with >30 mol% 3HV, may be useful in biocompatible biomedical applications.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.175-178
• /
• 2000

Biodegradability of the $poly({\beta}-hydroxybutyrate-co-3 -hydroxyvalerate)$ [PHB/V] containing 0, 10 and 15mol% hydroxyvalerate [HV] was studied. Bioderadability of PHB/V was evaluated at $30^{\circ}C$ for 58 days and $55^{\circ}C$ for 33 days by monitoring the time-dependent changes in weight loss(erosion) of aerobic conditions in a temperature-controlled microcosms containing the earthworm cast($30^{\circ}C$) and compost ($55^{\circ}C$). It was found that PHB/V biodegradability occurred with increasing HV monomer concentration from 0 mol% to 15 mol%.

• Journal of Adhesion and Interface
• /
• v.16 no.3
• /
• pp.108-115
• /
• 2015

In the present work, we investigated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene nanocomposites. The electrical, hydrophobic properties and thermal properties of the nanocomposite films having different graphene contents were investigated. The scanning electron microscopy (SEM) morphology showed good dispersion of graphene layers in the PHBV matrix. Based on the X-ray diffraction and differential scanning calorimetry, the addition of graphene increased the crystallinity of PHBV. Thermal stability, hydrophobicity, and electrical conductivity of the nanocomposites were increased with increasing the graphene contents.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.385-392
• /
• 2007

Poly (N-vinylpyrrolidone) (PVP) groups were grafted onto a poly(3-hydroxybutyrate-co-3-hydroryvalerate) (PHBV) backbone in order to modify its properties and synthesize a novel biocompatible copolymer. The crystallization behavior of PHBV and grafted PHBV was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). During the cooling-induced crystallization process, the crystallization temperature and the crystallization rate of the grafted PHBV decreased with increasing PVP weight fraction. On the heating scans of all grafted PHBV samples, a new crystallization exothermic peak appeared at almost the same temperature, suggesting the operation of a recrystallization process, while the melting temperature ($T_m$) and the apparent enthalpy of fusion (${\Delta}H_f$) were not affected by graft modification. During the isothermal crystallization process at the same temperature, the presence of side PVP groups decreased the spherulitic growth rate and the spherulitic band spacing with increasing PVP weight fraction in samples.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.239-243
• /
• 2010

Six strains of Ralstonia eutropha were grown to investigate characteristics of polyhydroxyalkanoates (PHA) synthesis from vegetable oils or glycerol. Poly(3-hydroxybutyrate) homopolymer was formed using soybean oil, olive oil, or glycerol as carbon source, while poly(3-hydroxybutyrate-co-4-hydroxybutyrate) or poly(3-hydroxybutyrateco-3-hydroxyvalerate) copolymers were synthesized by co-feeding $\gamma$-butyrolactone or pentanoic acid, respectively. Optimum strain was determined as R. eutropha KCTC 2662 in terms of final cell concentration and PHA content. From 20 g/L of soybean oil (optimum substrate), cell concentration and PHA content at 72 h ranged 1.7~9.2 g/L and 70~92 wt%, respectively.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.615-620
• /
• 1998

The readily fermentable carbon sources in swine were acetic acid, propionic acid and butyric acid at the average concentrations of 7.2 g/L, 2.2 g/L and 2.7 g/L, respectively. The swine waste also contained excess nitrogen and other mineral sources. In shake flask experiments, the optimal range of cell growth for Azotobacter vinelandii UWD were 1.0∼3.5 g/L of acetic acid, 0.7∼2.0 g/L of propionic acid and 0.5∼2.0 g/L of butyric acid. A mixture of these three acids simulating two times diluted swine waste supported the best cell growth but the amount of carbon sources was limited. In shake flask and fermentor experiments, an addition of 30 g/L of glucose increased the final cell dry weight 8 times while the final poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) concentration increased 86 times compared with using acid mixture only. A. vinelandii UWD preferred organic acids in the sequence of acetic acid, propionic acid, butyric acid, and valeric acid.

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2017

In this study, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene oxide (GO) nanocomposite films containing various content of GO were prepared using solution casting method. The effect of GO content on Young's modulus and dispersion of GO in PHBV matrix was investigated. Also, the thermomechanical properties, oxygen transmission rates and hydrolytic degradation of PHBV/GO nanocomposite films were studied. The addition of GO into PHBV improves the Young's modulus and decreases thermal expansion coefficient. The improvement can be mainly attributed to good dispersion of GO and interfacial interactions between PHBV and GO. Furthermore, PHBV/GO nanocomposite films show good oxygen barrier properties. PHBV/GO nanocomposites show lower hydrolytic degradation rates with increasing content of GO.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.92-100
• /
• 1996

For the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(P(3HB-co-3HV)) from butyric acid and valeric acid, 10 strains of bacteria capable of producing P(3HB-co-3HV) were isolated from soil. Among them, the strain HJ-067 showed the best ability of producing P(3HB-co-3HV), and was indentified as a Azotobacter sp. For the production of P(3HB-co-3HV), the optimum concentrations of butyric and valeric acid were 3.0g/l, respectively. The most effective nitrogen source was $(NH_4)_{2}SO_4$ at an optimum concentration of 0.75g/l, which was equivalent to 21.36 in C/N ratio. Deficiency of the cationic metal ions ($Zn^{2+},\;Co^{2+},\;Mn^{2+}$) in the proguction medium had stimulating effect on P(3HB-co-3HV) accumulation, especially in the manganese. deficient medium. The optimum temperature for P(3HB-co-3HV) production was 27$^{\circ}C$ and the optimum initial pH was 7.0. Under the optimum conditions, 1.82g/l of P(3HB-co-3HV) and 3.00g/l of dry biomass were produced after 36 hour cultivation, and the P(3HB-co-3HV) yield and HV% were 60.60% (w/w), 15.92%, respectively.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.404-407
• /
• 2003

Two recombinant Escherichia coli strains, GCSC6576 harboring a plasmid pSYL107 containing the Ralstonia eutropha polyhydroxyalkanoate (PHA) biosynthesis genes and a fadR atoC mutant LS5218 harboring a plasmid pJC4 containing the Alcaligenes latus PHA biosynthesis genes were compared for their ability to synthesize poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV) from whey. The 3HV fraction could be increased by acetic acid induction and oleic acid supplementation in flask cultures of recombinant E. coli GCSC6576. With the pH-stat fed-batch culture of recombinant E. coli LS5218, we obtained a cell concentration, a P(3HB-co-3HV) concentration, a P(3HB-co-3HV) content, and a 3HV fraction of 31.8 g/L, 10.6 g/L, 33.4%, and 6.26 mol%, respectively in 39 h.