• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.5
• /
• pp.237-251
• /
• 2002

The recent progress on metabolic systems engineering was reviewed based on our recent research results in terms of (1) metabolic signal flow diagram approach, (2) metabolic flux analysis (MFA) in particular with intracellular isotopomer distribution using NMR and/or GC-MS, (3) synthesis and optimization of metabolic flux distribution (MFD), (4) modification of MFD by gene manipulation and by controlling culture environment, (5) metabolic control analysis (MCA), (6) design of metabolic regulation structure, and (7) identification of unknown pathways with isotope tracing by NMR. The main characteristics of metabolic engineering is to treat metabolism as a network or entirety instead of individual reactions. The applications were made for poly-3-hydroxybutyrate (PHB) production using Ralstonia eutropha and recombinant Escherichia coli, lactate production by recombinant Saccharomyces cerevisiae, pyruvate production by vitamin auxotrophic yeast Toluropsis glabrata, lysine production using Corynebacterium glutamicum, and energetic analysis of photosynthesic microorganisms such as Cyanobateria. The characteristics of each approach were reviewed with their applications. The approach based on isotope labeling experiments gives reliable and quantitative results for metabolic flux analysis. It should be recognized that the next stage should be toward the investigation of metabolic flux analysis with gene and protein expressions to uncover the metabolic regulation in relation to genetic modification and/ or the change in the culture condition.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.526-531
• /
• 1998

In this study, the composition and characteristics of poly-$\beta$-hydroxybutyrate (PHB) biosynthesized by Actinobacillus sp. EL-9 are investigated. PHB produced by Actinobacillus sp. EL-9 was identified as the homopolymer of 3-hydroxy-butyric acid (PHB) by infrared spectroscopy and nuclear magnetic resonance spectroscopy analysis. The melting tem-perature (T$_{m}$), and crystallization temperature(T$_{c}$) of PHB was 169.7$^{\circ}C$ and 69.13$^{\circ}C$, respectively. The viscosity on he basis of Brookfield viscometer was 6.01 ㎗/g. The viscosity-average molecular weight estimated by Mark-Ho-wink-Sakurada equation was 1.08$\times$10$^{6}$ ($\pm$3,000).00).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.44.1-44.1
• /
• 2010

poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a bacterially derived copolymer produced by fermentation. PHBV has been attractive because of its potential environmental, pharmaceutical and biomedical applications. Recently, the electrospinning technique has been used to fabricate fibrous mat for biomedical applications such as artificial blood vessel, drug release and scaffolds, because this method is simple and easy to get ultrafine polymer fibers. Depending on speed of rotation drum collector, fiber structure was different. In this work, PHBV fiber was aligned by electrospinnning machine. Furthermore, alignment of PHBV fiber mats was given angle such as $45^{\circ}$, $60^{\circ}$ and $90^{\circ}$. The morphology of each aligned PHBV fiber mat was observed by SEM technique. The mechanical property was evaluated depending on alignment angle. Especially, cell attachment ability depending on alignment of PHBV fiber mats was carried out using MG- 63 osteoblast like cells.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.374-378
• /
• 2004

The biodegradable and biocompatible poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a copolymer of microbial polyester, was fabricated as nanofibrous mats by electrospinning. Image analysis of the electrospun nanofibers fabricated from a 2 wt% 2,2,2-trifluoroethanol solution revealed a unimodal distribution pattern of fiber diameters with an observed average diameter of ca. 185 nm. The fiber diameter of electrospun fabrics could be controlled by adjusting the electro spinning parameters, including the solvent composition, concentration, applied voltage, and tip-to-collector distance. Chondrocytes derived from rabbit ear were cultured on a PHBV cast film and an electrospun PHBV nano-fibrous mat. After incubation for 2 h, the percentages of attached chondrocytes on the surfaces of the flat PHBV film and the PHBV nanofibrous mat were 19.0 and 30.1 %, respectively. On the surface of the electrospun PHBV fabric, more chondrocytes were attached and appeared to have a much greater spreaded morphology than did that of the flat PHBV cast film in the early culture stage. The electro spun PHBV nanofabric provides an attractive structure for the attachment and growth of chondrocytes as cell culture surfaces for tissue engineering.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.670-672
• /
• 2000

Azotobacter vinelandii UWD synthesizes poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), one of the biodegradable polymers, when odd and even number carbon sources are simultaneously added to a medium. In this study, we investigated the specific growth rate of Azotobacter vinelandii UWD on propionic acid and valeric acid. The specific growth rates were $0.183 hr^{-1} and 0.137 hr^{-1}$ at 1.0∼1.5 g/L of propionic acid and 1.0 g/L of valeric acid, respectively. When a mixture of 0.75 g/L of propionic acid and 0.5 g/L of valeric acid was added to the medium, the specific growth rate was 0.196 hr(sup)-1, which was equal to or higher than those of the individual organic acids. Among 10∼50 g/L of glucose cell growth was best at 20 g/L.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.2
• /
• pp.338-347
• /
• 2021

Polyhydroxyalkanoates (PHA) are a family of microbial polyesters that are used as biodegradable plastics in replacement of conventional plastics for various applications. However, the high production cost is the barrier for PHA market expansion. This study aimed to utilize food waste as low-cost feedstock to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei. The effects of acetate (Ac), propionate (Pr), butyrate (Bu), and the short-chain carboxylates derived from food waste were examined on the microbial growth and PHBV production. Results showed that a mixture of carboxylates provided a 55% higher PHBV yield than glucose. The food-waste-derived nutrients achieved the yields of 0.41 to 0.54 g PHBV/g Ac from initial loadings of 450 mg/l to 1,800 mg/l Ac of total carboxylates. And the consumption of individual carboxylate varied between different compositions of the carbon source. The present study demonstrates the potential of using food waste as feedstock to produce PHBV by Haloferax mediterranei, which can provide economic benefits to the current PHA industry. Meanwhile, it will also help promote organic waste reduction in landfills and waste management in general.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.213-217
• /
• 2003

The effects of glucose concentration on the production of PHB by fed-batch culture of Ralstonia eutropha were investigated. In the range of glucose concentration of $2.5\;{\sim}\;40\;g/l$, it was found that the high glucose concentration was not favorable for the PHB formation after the phosphate limitation. It was further confirmed by the specific PHB synthesis rates and yields. The PHB concentration decreased much with the increase of glucose concentration. But if the glucose concentration was very low, e.g. 2.5 g/l, the cell growth and PHB synthesis also could be limited because of inadequate glucose supply. Itwould be better to maintain the glucose concentration at about 9.0 g/l to obtain high DCW, PHB concentration and productivity.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.171-176
• /
• 2006

A strictly aerobic, non-motile, ovoid-shaped Alphaproteobacteria, designated strain $JC2049^T$ was isolated from a tidal flat sediment sample. The results of 16S rRNA gene sequence analysis indicated that this isolate belonged to the genus Thalassobius, with a sequence similarity of 96.9-97.3% to other valid Thalassobius spp. The cells required 1-7% NaCl for growth (optimum 2%) and accumulated $poly-\beta-hydroxybutyrate$. Nitrite was reduced to nitrogen, but nitrate was not reduced to nitrite. No genetic potential for aerobic anoxygenic photosynthesis was detected. The primary isoprenoid quinone (Ubiquinone-10), predominant cellular fatty acids $(C_{18:1}{\omega}7c,\;11\;methyl\;C_{18:1}\omega7c\;and\;C_{16:0})$ and DNA G+C content (61 mol %) were all consistent with the assignment of this isolate to the genus Thalassobius. Several phenotypic characteristics clearly distinguished our isolate from other Thalassobius species. The degree of genomic relatedness between strain $JC2049^T$ and other Thalassobius species was in a range of 20-43 %. The polyphasic data presented in this study indicates that our isolate should be classified as a novel species within the genus Thalassobius. The name Thalassobius aestuarii sp. novo is therefore proposed for this isolate; the type strain is $JC2049^T(=IMSNU\;14011^T=KCTC\;12049^T=DSM\;15283^T)$.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.537-544
• /
• 1998

The cultivation conditions of transformant Alcaligenes eutrophus AER5 harboring cloned phbC gene for mass production of poly (3-hydroxybutyrate-3-hydroxyvalerate)[P(3HB-3HV)] containing high molar fraction of 3-hydroxyvalerate (3-HV) were investigated. In two-stage batch cultivation, transformant accumulated P(3HB-3HV) containing 52.2 mol% of 3HV compared to 30 mol% of parent strain A. eutrophus H16. The increased 3-HV molar fraction was due to the amplified activity of PHB synthase participating in condensation of 3-HB and 3-HV. To increase efficiency of P(3HB-3HV) accumulation, fructose was added along with precursor compound valerate, and total cell mass and P(3HB-3HV) concentrations remarkably increased, but not 3-HV molar fraction. The effect of magnesium ion showed that P(3HB-3HV) concentration and 3-HV molar fraction were significantly increased upto 6.1 g/L and 71.3 mol% at 0.01 g/L of MgSO$_4$, respectively. The efficiency of several pH adjuster, NaOH, NaOH and (NH$_4$)$_2$SO$_4$, and NH$_4$OH, on total cell mass, p(3HB-3HV) concentration, and 3-HV molar fraction was also compared. To overcome the disadvantage of two-stage cultivation, one-stage intermittent fed-batch cultivation was attempted, such a way 10.0 g/L of fructose was supplied for cell growth at initial 36 hr and then 10.0 g/L of valerate and 5.0 g/L of fructose were applied to induce the accumulation of P(3HB-3HV), consequently, 10.4 g/L of P(3HB-3HV) with 38 mol% of 3-HV fraction could be obtained after 72 hr. These results can be used for elucidating cultivation strategy for mass production of P(3HB-3HV) containing high 3-HV molar fraction using transformant A. eutrophus AER5 harboring cloned phbC gene.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.399-404
• /
• 2014

Production of biodegradable polymer polyhydroxyalkanoates (PHAs) from industrial wastes exhibits several advantages such as recycle of waste and the production of high valuable products. To this end, this study aimed at isolating from the sewage treatment plant a PHA producing bacterium capable of utilizing wastes generated from biodiesel and food industries. A Bacillus cereus strain capable of producing poly(3-hydroxybutyrate) [P(3HB)] was isolated, which was followed by confirmation of P(3HB) accumulation by gas-chromatographic analyses. Then, the effects of nutrient limitation on P(3HB) production by B. cereus was first examined. Cells cultured in a minimal medium under the limitation of nitrogen, potassium and sulfur suggested that nitrogen limitation allows the highest P(3HB) accumulation. Next, production of P(3HB) was examined from both waste of biodiesel production (crude glycerol) and waste from food industry (spent coffee grounds). Cells cultured in nitrogen-limited minimal medium supplemented crude glycerol and waste spent coffee grounds extract accumulated P(3HB) to the contents of 2.4% and 1.0% of DCW. This is the first report demonstrating the capability of B. cereus to produce P(3HB) from waste raw materials such as crude glycerol and spent coffee grounds.