• Macromolecular Research
• /
• 제17권7호
• /
• pp.469-475
• /
• 2009

We investigated the feasibility of dispersion polymerization without any stabilizer, which has been considered essential for ensuring colloidal stability. By employing small amounts of a lyophilic comonomer, 4-vinyl pyridine, styrene was successfully polymerized by dispersion polymerization in aqueous alcohol without stabilizer to afford stable poly(styrene-co-4-vinyl pyridine) copolymer microspheres. The stable microspheres were produced in the 4-vinyl pyridine range of 2-15 wt% to styrene. Without 4-vinyl pyridine, severely coagulated particles were obtained, implying that the poly(4-vinyl pyridine) moiety endowed colloidal stability. The polymerization kinetics, behavior, and properties of the ultimate particles showed general features of dispersion polymerization. The study results suggest that stabilizer- tree dispersion polymerization is possible, thereby facilitating the synthesis of impurity(stabilizer)-tree polymer particles.

• 접착 및 계면
• /
• 제20권2호
• /
• pp.53-60
• /
• 2019

여러 종류의 용매와 상용화되어 있는 비공유결합성 분산제들을 이용하여 안정한 그래핀 분산액을 제조 하였다. 분산액은 3시간의 초음파 처리를 통하여 제조 되었으며, NMP 용매에서는 Tween 계열과 Span 계열과 Pluronic 계열의 분산제가 안정한 그래핀 분산액을 형성하였다. 또한 에탄올 용매에서는 질소를 포함한 분산제 종류가 안정한 분산액을 형성하였으며, 물과 dichloromethane에서는 모든 분산제에 대하여 대체로 불안정하였지만 poly(4-vinyl pyridine)과 sodium dodecyl sulfonate를 사용한 경우 일부 안정한 분산액을 형성 하였다. 또한 Poly(4-vinyl pyridine), poly(vinyl pyrrolidone), poly(2-(dimethylamino)ethyl methacrylate)를 이용하여 더 큰 용량의 그래핀 분산액을 제조하였다. 본 연구는 그래핀의 분산을 위한 여러 용매 및 분산제에 대한 기준을 제공할 수 있을 것으로 기대된다.

• 폴리머
• /
• 제30권6호
• /
• pp.519-524
• /
• 2006

나노피막을 형성하는 유기솔더 보존제의 주성분인 저분자 imidazole계 유기물을 대체할 수 있는 고분자 물질을 합성하였다. Cu와 같은 금속과의 접착성이 종은 비닐 피리딘을 주요 단량체로 하였고 물성 개질을 위한 공중합용 단량체로 아크릴아미드와 알릴아민을 사용하였다. 다양한 조성의 공중합체를 제조하여 코팅성, 용해도, 열적 특성, 산화방지 특성 등의 유기솔더 보존제로서의 특성을 평가하였다. 공중합체중 알릴아민을 함유한 공중합체의 경우 전반적으로 Cu pad에 대해 뛰어난 코팅능과 열적안정성을 보였고, 분자량 및 알릴아민 함유량에 따라 그 특성이 변화하였다. Oxygen induced temperature를 측정하여 시간에 따른 열 안정성을 확인해 본 결과 $230^{\circ}C$까지는 70분이상 동안 아무런 산화반응에 의한 열량 변화를 관찰할 수 없었고, 모든 알릴아민계 공증합체가 산소조건하에서 $200^{\circ}C$에서 1시간 동안 무게감량의 변화가 거의 없었으므로 충분한 열적 안정성을 갖고 있는 것으로 확인되었다.

• 한국염색가공학회지
• /
• 제3권2호
• /
• pp.43-48
• /
• 1991

Cellulose acetate (CA) and poly-4-vinyl pyridine (PVP) in various weight proportions were mixed in a mixed solvent of trifluoroacetic acid: methylene chloride/6:4 (v:v). CA was miscible with PVP in that solvent system. CA/PVP/solvent show liquid crystal in a certain range of concentration and the nature of that liquid crystal was cholesteric. Films of the liquid crystal composite cast from the liquid crystal solutions of CA/PVP were tested in a viewpoint of biomembrane. Results show that considering permselectivity CA/PVP membrane is better than that of CA and CA/PVP membrane is closer to cell membrane.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1405-1407
• /
• 2009

We prepared polystyrene-b-poly(2-vinyl pyridine) (PSb-P2VP) lamellar films which is hydrophobic block-hydrophilic polyelectrolyte block polymer have 57 kg/mol-b-57 kg/mol. The result of UV-visible absorption spectra supported that effect of poly(ethylene oxide) on the band gap tuning of PS-P2VP photonic gel like salt effect.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.89-92
• /
• 1998

1. Introduction : Among many azeotropic compounds, pyridine which forms an azeotropic mixture with three moles of water boiling at 92-93$\circ$C is very useful synthetic intermediate in laboratory and industry. With conventional separation method, the dehydration of pyridine aqueous solution is difficult and requires strong drying chemicals. To overcome these difficulties, several researchers have investigated on the separation of pyridine from aqueous solution through polymer membranes. Kujawski reported several ion-exchang membranes containing carboxylic and sulfonic fuctional group for dehydration of aqueous pyridine solution [1]. We have applied the idea of activation of water tranport through ion-dipole interactions between polymer membrane and aclueous feed. Our previous studies reported on the in-situ complex membrane to separate water from aqueous pyridine solution based on simple acid'-base theory [2, 3]. Water transport was enhanced through in-situ complex formation between the , acid moiety in the membrane and the incoming pyridine moiety in the feed.

• Elastomers and Composites
• /
• 제29권5호
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.127-133
• /
• 2004

We have studied the surface micelle formation of polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) at the air-water interface. A series of four PS-b-P2VPs were synthesized by anionic polymerization, keeping the PS block length constant (28 kg/㏖) and varying the P2VP block length (1, 11, 28, or 59 kg/㏖). The surface pressure-area ($\pi$-A) isotherms were measured and the surface morphology was studied by atomic force microscopy (AFM) after Langmuir-Blodgett film deposition onto silicon wafers. At low surface pressure, the hydrophobic PS blocks aggregate to form pancake-like micelle cores and the hydrophilic P2VP block chains spread on the water surface to form a corona-like monolayer. The surface area occupied by a block copolymer is proportional to the molecular weight of the P2VP block and identical to the surface area occupied by a homo-P2VP. It indicates that the entire surface is covered by the P2VP monolayer and the PS micelle cores lie on the P2VP monolayer. As the surface pressure is increased, the $\pi$-A isotherm shows a transition region where the surface pressure does not change much with the film compression. In this transition region, which displays high compressibility, the P2VP blocks restructure from the monolayer and spread at the air-water interface. After the transition, the Langmuir film becomes much less compressible. In this high-surface-pressure regime, the PS cores cover practically the entire surface area, as observed by AFM and the limiting area of the film. All the diblock copolymers formed circular micelles, except for the block copolymer having a very short P2VP block (1 kg/㏖), which formed large, non-uniform PS aggregates. By mixing with the block copolymer having a longer P2VP block (11 kg/㏖), we observed rod-shaped micelles, which indicates that the morphology of the surfaces micelles can be controlled by adjusting the average composition of block copolymers.

• 공업화학
• /
• 제9권2호
• /
• pp.311-316
• /
• 1998

물리 화학적인 특성이 다른 다공성 고분자 마이크로겔에 대한 bovine serum albumin (BSA-protein) 단백질의 흡착평형 특성을 연구하였다. 수용액 속에서 고분자와 단백질사이의 소수성 상호작용에 의하여 폴리부틸메타크릴레이트 (PBMA) 마이크로겔이 폴리비닐피리딘 (PVP)과 폴리아크릴로니트릴 (PAN) 마이크로겔보다 높은 흡착특성을 나타내었으며, PBMA 마이크로겔이 PVP와 PAN 마이크로겔보다 비가역적으로 흡착평형 특성을 나타내었다. 그러므로 고분자 마이크로겔의 물리적인 특성과 단백질-고분자 마이크로겔 사이의 정전기적 인력보다는 소수성 상호작용이 단백질의 흡착특성에 중요한 역할을 하고 있음을 알 수 있다. 또한 PBMA, PVP 및 PAN 마이크로겔 모두 Freundlich 흡착 등온식보다는 Langmuir 흡착 등온식에 잘 적용되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.261-261
• /
• 2010

Photonic band gap (PBG) materials have been of great interest due to their potential applications in science and technology. Their applications can be further extended when PBG becomes tunable against various chemical and electrical stimuli. In recent, it was found that tunable photonic band gap materials can be achieved by incorporating stimuli-responsive smart gels into PBG materials. For example, the characteristic volume phase transition of gels in response to the various external stimuli including temperature, pH, ionic strength, solvent compositions and electric field were recently combined with the unique optical properties of photonic crystals to form unprecedented highly responsive optical components. Since these responsive photonic crystals are capable of reversibly converting chemical or electrical energy into characteristic optical signals, they have been considered as a good platform for label-free chemical or biological detection, actuators or optical switches as well as a model system for investigating gel swelling behavior. Herein, we report block copolymer photonic gels self-assembled from polystyrene-b-poly (2-vinyl pyridine) (PS-b-P2VP) block copolymers. In this talk, we are going to demonstrate that selective swelling of lamellar structure can be effectively utilized for fabricating PBG materials with extremely large tunability. Optical properties and their applications will be discussed.