• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.453-465
• /
• 2017

UN adopted the 2030 Agenda for Sustainable Development and the Sustainable Development Goals (SDGs) in 2015, a set of 17 objectives with 169 targets expected to guide actions over the next 15 years (2016-2030). One goal expressly focuses on the oceans, that is, SDG 14 'Conserve and sustainably use the oceans, seas and marine resources for sustainable development'. More than 30% of fish stocks worldwide were classified by FAO(2016) as overfished. Globally, world capture fisheries are near the ocean's productive capacity with catches on the order of 80 million metric tons. Aquaculture production is increasing rapidly and is expected to continue to increase, but aquaculture encounters some environmental challenges, including potential pollution, competition with wild fishery resources, potential contamination of gene pools, disease problems, and loss of habitat. Accordingly, there have been a variety of world organization and conferences stressing the importance of the implementation of the ecosystem-based fisheries management(EBFM) to overcome these problems. Annual catch of Korean fisheries have shown continuously declining patterns since late 1990s. Most fish stocks are currently known to be over-exploited, and some stocks are depleted due to the increase in fishing intensity and over-capitalization of fishing fleets. Other reasons for the depletion are land reclamations and coastal pollution, which destroy spawning and nursery grounds along the coastal regions. Aquaculture production is also increasing rapidly in Korea. However, several important issues such as gene pool and interaction with capture fisheries should be considered. The EBFM approach should use the best available information coupled with a reasonable application of the precautionary approach. The EBFM has global relevance, and so the real challenge will be to develop and use reliable, robust and cost-effective means of assessing and monitoring the status of ecosystems and their resources, and rapid means of detecting any undesirable and excessive impacts that threaten sustainable use. Future fisheries education should take into account UN's SDGs, which were adopted to achieve the global 2030 agenda. However, there are some difficulties in the current fisheries education system in Korea. First, the current education organizations are limited within the old frame of traditional fisheries sciences. Second, the fisheries education is currently lack of the future-oriented education system and of customized schools or departments. Third, the on-going fisheries education has been based upon few educational policies which are sufficiently relevant to holistic SDGs of the global standard. Accordingly, directions to modern fisheries education for achieving SDGs would be, first, the transition of fisheries education structure into the future-oriented and customized education system. Second, fisheries education needs to shift to the new paradigm, which combines traditional fisheries science education with related fields such as oceanography and environmental sciences to adopt the concept of EBFM. Lastly, fisheries education should accompany relevant policies for effectively achieving SDGs.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2010

Total suspendid solid (TSS) of non point source pollutants in construction site are in higher concentration than others (BOD, COD etc). Also, the TSS concentration is very sensitive to the rainfall intensity in early stage of construction. There are two methods for treatment of non point source pollutants, which are temporary treatment facility and filtering one. But they have disadvantages. Temporary facility system has very low efficiency and filtering system consumes high energy and takes up large footprint. This study shows how prefabricated flocculation/coagulation system is developped to cover the above weakness and evaluation of the system performance in construction site. The prefabricated flocculation/coagulation system has very high treatment efficiency comparing with temporary and filtering system and takes small footprint. Therefore, it expects that the system leads to prevention of pollution near construction site and reduction of public grievance. Proper coagulant dosage and sludge circulation facility application, controlling the height of sludge interfacial are necessary to maximize the system efficiency.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.823-835
• /
• 2023

Recently, due to the increase in abnormal climate, rainfall intensity is increasing and drought periods are continuing. These environmental changes lead to prolonged drought conditions and difficulties in real-time recognition. In general, drought can be judged by the amount of precipitation and the number of days without rainfall. In determining the impact of drought, it is divided into meteorological drought, agricultural drought, and hydrological drought and evaluation is made using the drought index, but environmental drought evaluation is insufficient. The river water quality managed through the total water pollution cap system is vulnerable to the effects of such drought. In this study, we aim to determine the drought impact on river water quality and quantify the impact of prolonged drought on water quality. The impact of rain-free days and accumulated precipitation on river water quality was quantitatively evaluated. The Load Duration Curve (LDC), which is used to evaluate the water quality of rivers, was used to evaluate water pollution occurring at specific times. It has been observed that when the number of consecutive rainless days exceeds 14 days, the target water quality in the mid-basin is exceeded in over 60% of cases. The cumulative rainfall is set at 28 days as the criteria, with an annual average rainfall of 3%, which is 32.1 mm or less. It has been noted that changes in water quality in rivers occur when there are 14 or more rainless days and the cumulative rainfall over 28 days is 32.1 mm or less in the Gamcheon Mid-basin. Based on the results of this study, it aims to quantify the drought impact and contribute to the development of a drought water quality index for future environmental droughts.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.977-988
• /
• 2012

This study analyzed the characteristics of stormwater runoff by rainfall type in orchard areas and transportation areas for 2 years(2010~2011year). Effluents were monitored to calculate the Event Mean Concentrations(EMCs) and runoff loads of each pollutant. The pollutant EMCs by volume of stormwater runoff showed the ranges of BOD 0.9~13.6 mg/L, COD 13.7~45.2 mg/L, SS 4.1~236.4 mg/L, T-N 2.123~21.111 mg/L, T-P 0.495~2.214 mg/L in the orchard areas, and was calculated as BOD 2.3~22.5mg/L, COD 4.4~91.1 mg/L, SS 4.3~138.3 mg/L, T-N 0.700~13.500 mg/L, T-P 0.082~1.345 mg/L in the transportation areas. The correlation coefficient of determination in the orchard area was investigated in the order of Total Rainfall(0.81) > Total Runoff(0.76) > Rainfall Intensity(0.56) > Rainfall Duration(0.46) > Antecedent Dry Days(0.27). Also, in the case of the transportation area was investigated in the order of Total Rainfall (0.55) > Total Runoff(0.54) > Rainfall Intensity(0.53) > Rainfall Duration(0.24) > Antecedent Dry Days(0.14). As the result, comparing valuables relating to runoff of non-pollutant source between orchard areas and transportation areas, orchard area($R^2{\geq}0.5$ : X3, X4, X5) was investigated to have more influence of diverse independent valuables compared to the transportation area($R^2{\geq}0.5$ : X3, X4) and the difference of discharge influence factor by the land characteristics appeared apparently.

• Clean Technology
• /
• v.13 no.4
• /
• pp.300-307
• /
• 2007

The combustion characteristics of diffusion flame formed in the wake of a cylindrical stabilizer with varying fuel injection angle were studied. This study was performed by measuring the flame stability limits, lengths and temperatures of recirculation zones of flames, turbulence intensity in the wake of stabilizer, and concentration distribution of combustion gas, and by taking photographs of flames. The flame stability limits are dependent on fuel injection angle and main air velocity. The length and temperature of recirculation zone are dependent on fuel injection angle. As the length of the recirculation zone is decreased, the flame shows more stable behavior. The temperature of recirculation zone has a maximum value at the condition of theoretical mixture. The flame stability is enhanced when the temperature in the recirculation zone decreases. The turbulence intensity in the wake of stabilizer is independent of the fuel injection angle, but it is affected by stabilizer itself and main air flow condition. If the stabilization characteristics of flame is good, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The combustion characteristics of diffusion flame can be controlled by changing the fuel injection angles. The appropriate fuel injection angle should be selected to get high combustion efficiency, high load power, low environmental pollution, and clean combustion condition of fuel.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.917-927
• /
• 2018

Seven heavy metal concentrations (As, Cd, Cr, Cu, Ni, Pb, Zn) were continuously analyzed for twenty rainfall events in 2017~2018 in an urban basin. The overall and dynamic correlations between runoff characteristics and heavy metal concentrations were examined. The peak metal concentration generally appeared in the initial runoff but found to be delayed when the rainfall intensity was low. The rainfall duration had no relationship with either heavy metal concentrations or their total mass. Dynamics of heavy metal mass (load), with the exception of Cu and Zn, showed strong correlation with the 30 minute rainfall intensity (0.60~0.88) and runoff volume (0.74~0.89). While event mean concentration (EMC) showed positive correlation (0.54~0.73) with antecedent dry days (ADD), no significant relationship was found between runoff volume and pollutant concentration. This implies that the pollutants built up on the surface during dry days are washed off even with low rainfall energy. The dynamics of heavy metal and TSS concentrations showed good correlation (0.68~0.87). This result shows that the metals are transported along with solid particles as adsorbate in surface runoff. Regular street sweeping will reduce significant amount of heavy metal loads in urban surface runoff.

• Journal of Korea Trade
• /
• v.26 no.2
• /
• pp.45-64
• /
• 2022

Purpose - This paper examines South Korea's potential status as a carbon leakage country, and the level of risk posed by the Korean emissions trading scheme (ETS) for Korean industries. The economic effects of border carbon adjustments (BCAs) to protect energy-intensive Korean industries in the process of achieving the carbon reduction target by 2030 through the Korean ETS are also analyzed. Design/methodology - First, using the Korean Input-Output (IO) table, this paper calculates the balance of emissions embodied in trade (BEET) and the pollution terms of trade (PTT) to determine Korean industries' carbon leakage status. Analyses of the risk level posed by carbon reduction policy implementation in international trade are conducted for some sectors by applying the EU criteria. Second, using a computable general equilibrium (CGE) model, three BCA scenarios, exemption regulations (EXE), reimbursement (REB), and tariff reduction (TAR) to protect the energy-intensive industries under the Korean ETS are addressed. Compared to the baseline scenario of achieving carbon reduction targets by 2030, the effects of BCAs on welfare, carbon leakage, outputs, and trading are analyzed. Findings - As Korea's industrial structure has been transitioning from a carbon importing to a carbon leaking country. The results indicate that some industrial sectors could face the risk of losing international competitiveness due to the Korean ETS. South Korea's industries are basically exposed to risk of carbon leakage because most industries have a trade intensity higher than 30%. This could be interpreted as disproving vulnerability to carbon leakage. Although the petroleum and coal sector is not in carbon leakage, according to BEET and PTT, the Korean ETS exposes this sector to a high risk of carbon leakage. Non-metallic minerals and iron and steel sectors are also exposed to a high risk of carbon leakage due to the increased burden of carbon reduction costs embodied in the Korean ETS, despite relatively low levels of trade intensity. BCAs are demonstrated to have an influential role in protecting energy-intensive industries while achieving the carbon reduction target by 2030. The EXE scenario has the greatest impact on mitigation of welfare losses and carbon leakage, and the TAF scenario causes a disturbance in the international trade market because of the pricing adjustment system. In reality, the EXE scenario, which implies completely exempting energy-intensive industries, could be difficult to implement due to various practical constraints, such as equity and reduction targets and other industries; therefore, the REB scenario presents the most realistic approach and appears to have an effect that could compensate for the burden of economic activities and emissions regulations in these industries. Originality/value - This paper confirms the vulnerability of the Korean industrial the risk of carbon leakage, demonstrating that some industrial sectors could be exposed to losing international competitiveness by implementing carbon reduction policies such as the Korean ETS. The contribution of this paper is the identification of proposed approaches to protect Korean industries in the process of achieving the 2030 reduction target by analyzing the effects of BCA scenarios using a CGE model.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.118-127
• /
• 2012

Objectives: This study was undertaken to assess the sanitary conditions in the kitchens of food court/cafeterias and determine seasonal variations. Methods: We measured environmental factors (air temperature, relative humidity, illumination intensity, noise level), and dropping airborne microbes (bacteria and fungi) in the kitchens of eight food court/cafeterias in four seasons (January, April, July, and October). Air temperature and relative humidity were measured with in/out thermo-hygrometers at 1.2-1.5 m above floor level. Illuminance measurement was performed through the multiple point method of Korean Standards (KS). Noise level was measured by the standard methods for the examination of environmental pollution (noise and vibration) of Korea. The estimation of dropping airborne bacteria and fungi was performed through use of Koch's method. Results: The highest kitchen air temperature was in July, and the lowest in January. The average temperature surpassed $21^{\circ}C$ throughout the seasons, suggesting a higher temperature than required for the safe handling of food. Humidity in all the kitchens was measured in the range of 50-60%. Half of the kitchens showed illumination intensities below 300 Lux in April. It was found that the sound pressure level of noise in almost all of the kitchens was higher than 85 dB (A). The highest levels of dropping airborne bacteria and fungi were noted in July. The numbers of airborne bacteria were higher than those of fungi. The levels of dropping airborne bacteria and fungi were affected by air temperature, relative humidity, season, and place. Conclusions: This study indicates that the kitchen environments were unqualified to supply safe food. The hygiene level of the kitchens should be improved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.125-135
• /
• 2005

Generation and transport of nonpoint source pollution, especially sediment-associated pollutants, are profoundly influenced by hydrologic features of runoff. In order to identify pollutant export rates, hence, clear knowledge of rainfall-runoff relationship is a pre-requisition. In this study, performance of AnnAGNPS model was assessed based on the ability of the model to predict rainfall-runoff relationship. Three catchments, each under different nearly single land use, were simulated. From the results, it was found that the model was likely to produce better predictions for larger catchments than smaller catchments. Because of using the daily time scale, the model could not account for short durations less than 24 hours, especially high intensity events with multiple peak flow that significantly contribute to the generation and transport of pollutants. Since CN information for regional areas has not been built up, a careful selection of CN is needed to achieve accurate prediction of runoff volume. Storm distribution also found to be considered as an important calibration parameter for the hydrologic simulation.

• Corrosion Science and Technology
• /
• v.17 no.2
• /
• pp.60-67
• /
• 2018

The compounds associated with corrosion, in metallic archaeological samples of carbon steel of insular origin were evaluated to establish their degree of deterioration and structural damage against air pollution. The iron phases present in samples of archaeological artifacts were detected by Raman spectroscopy and confocal Raman microcopy. These samples mainly exhibited ing mainly ${\beta}$-FeO(OH) type goethite oxyhydroxides and small amounts of akaganeite ${\alpha}$-FeO(OH) lepidocrocite ${\gamma}$-FeO(OH) due to dominant chloride in a marine environment and non-stoichiometric oxyhydroxides Fe (II + / III +) as indicators of early corrosion. Some parts showed the presence of magnetic maghemite indicating high corrosion. ${\gamma}$-FeO(OH) is a precursor of phases associated with advanced marine corrosion. By studying its decomposition by Raman spectroscopy, it was synthesized with the following sequence: ${\gamma}-FeO(OH){\rightarrow}{\alpha}-FeO(OH)+{\gamma}-FeO(OH)$, ${\rightarrow}{\gamma}-Fe_2O_3+Fe_3O_4$. Ferric compounds provided evidence for the effect of intensity of laser on them, constituting a very useful input for the characterization of oxidation of iron in this type of artifacts. Thus, destructive analysis techniques should be avoided in addition to the use of small amounts of specimen.