• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.45-58
• /
• 2013

교합접촉 분석에 이용되는 T-Scan $III^{(R)}$ (Tekscan, South Boston, MA, USA)의 정확도 및 신뢰도를 Add picture 방법을 통해 평가하였다. 두 방법에서 공통적인 교합접촉점의 분포 및 교합접촉면적을 비교하여 교합진단 및 조정 술식에서 T-Scan 방법의 적용 시 고려점을 밝히고자 하였다. Angle I급 교합관계, 정상치열자 한 사람의 구강을 대상으로 부가중합형 실리콘인상재를 이용하여 상하악치열궁을 10회 인상채득하였으며, 10쌍의 초경석고 모형을 제작하였다. 자체제작한 하중장치에 모형을 자석과 경석고를 이용하여 부착한 후 최대감합위와 최대교합력을 재현하기 위해 78.9kg의 하중을 가하였다. T-Scan 측정 시에는 상하악 모형과 T-Scan 센서의 위치가 변하지 않는 상태에서 2번 반복 측정하였다. Add Picture의 경우 상하악모형을 동일한 하중을 가하여 최대감합위에서 폴리이써 교합인기재를 이용하여 교합을 인기하였다. 교합접촉 양상은 접촉점 수와 총 교합면적에 대한 접촉면적 백분율을 측정하여 비교하였다. T-Scan 방법은 포토샵 프로그램 상에서 픽셀수를 계산하여 색상에 따른 면적을, Add picture 방법은 빛 투과 정도에 따라 인상재 두께를 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 3가지로 나누고, 이에 따른 면적을 실측하여 계산하였다. 총 교합면면적은 접촉면을 표시한 모형의 촬영상에서 픽셀수를 계산하여 함께 촬영된 격자를 기준으로 제곱미터값으로 변환하였다. 대응표본 t-검정을 이용하여 통계분석하였다. T-Scan 방법에서 분홍색상 및 붉은 색상으로 표시된 면적의 일부가 Add picture 방법에서 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 상하악 치아 간 거리에 해당하는 면적에 상응하였다. 교합접촉점 분포 비교 시 T-Scan 방법과 Add picture 방법은 유사하였다. 교합접촉면적 비교 시 T-Scan 방법에서 확대된 결과가 관찰되었으며, 전체교합면적에 대한 접촉면적 백분율 비교에서도 T-Scan 방법과 Add picture 방법의 백분율값은 유의한 차이를 보였다(P<.05). T-Scan에서 분홍색상 및 붉은 색상으로 표시된 부위의 면적값은 Add picture의 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ 부위의 면적값보다 크고(P<.05), $0{\sim}60{\mu}m$ 부위와는 유사한 값을 보였다(P>.05). T-Scan에서의 교합접촉상은 실제보다 확대되어 나타났으며, 따라서 교합접촉에 대한 진단 및 조정 술식에서 보조적인 수단으로 활용하는 것이 추천된다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.523-530
• /
• 2014

Machine material and structural strain are critical factors for appraising mechanical properties and safety. Particularly in three and four-point bending tests, which appraise the deflection and flexural strain of an object due to external force, measurements are made by the crosshead movement or deflection meter of a universal testing machine. The Digital Image Correlation (DIC) method is one of the non-contact measurement methods. It uses the image analyzing method that compares the reference image with the deformed image for measuring the displacement and strain of the objects caused by external force. Accordingly, the advantage of this method is that the object's surface roughness, shape, and temperature have little influence. However, its disadvantage is that it requires extensive time to compare the reference image with the deformed image for measuring the displacement and strain. In this study, an algorithm is developed for DIC that can improve the speed of image analysis for measuring the deflection and strain of an object caused by a three-point bending load. To implement this algorithm for improving the speed of image analysis, LabVIEW 2010 was used. Furthermore, to evaluate the accuracy of the developed fast correlation algorithm, the deflection of an aluminum specimen under a three-point bending load was measured by using the universal test machine and DIC measurement system.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.209-212
• /
• 2018

이방성 도전필름(ACF)을 사용한 본딩은 납땜이 용이하지 않은 이질적인 소재 간 미세 접합을 형성하는데 널리 사용되어진다. 성공적인 ACF 본딩 구현을 위한 3가지 제한조건이 존재한다. 본딩 접촉점은 설정된 작업 시간동안 적절한 압력과 온도를 유지한 헤드에 의해서 압착되어야 한다. 본 논문에서는 머신 비전을 기반으로 한 ACF 본딩기법을 제안하고 실험을 통해 검증한다. 시스템은 본딩 작업대 상의 PCB 위치 및 방향을 계산하고 헤드가 압착되어야 하는 최적의 접촉점을 결정한다. 제안한 시스템이 접촉면 상의 헤드 평탄도를 보장함으로써 접착력을 향상시킬 수 있음을 실험결과를 통해 보여준다.

• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.69-78
• /
• 2007

This study was performed to compare the stress distribution pattern in the crestal cortical bone and cancellous bone using 3-dimensional finite element stress analysis when 2 different Young's modulus(high modulus, model 1; low modulus, model 2) of cancellous bone was assumed. For the analysis, a finite element model was designed to have two square-threaded implants fused together and located at first and second molar area. Stress distribution was observed when vertical load of 200N was applied at several points on the occlusal surfaces of the implants, including central fossa, points 1.5mm, 2mm, 3mm and 3.5mm buccally away from central fossa. The results were as follows; 1. In both model, the maximum Von-Mises stress in the crestal cortical bone was greater when the load was applied at the central point, points 1.5mm and 2mm buccally away from central fossa than other cases. 2. In the cortical bone around first and second molar, model 2 showed greater Von-Mises stress than model 1. It is concluded that when the occlusal contact is afforded, the distribution of stress varies depending on the density of cancellous bone and the location of loading. More favorable stress distribution is expected when the contact load is applied within the diameter of fixtures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.467-472
• /
• 2005

Load/Unload(L/UL) technology includes the benefits, that is, increased areal density, reduced power consumption and improved shock resistance contrary to contact start stop(CSS). It has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main objectives of L/UL are no slider disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL systems. In this paper, we focus on the effect of the ramp profile. We can find out the lateral velocities in L/UL process through experiments and simulations for force of voice coil motor and friction force on ramp. And then, we will gain the optimal design of ramp slope to maintain the minimum clearance of suspension dimple and slider with FE model. In special, after finding the point at which air bearing breaks and designing the ramp, we will identify the results for improving unload performance.

• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1983

Path of insertion(1) can be defined that the direction of movement of an appliance from the point of initial contact of its rigid parts with the supporting teeth to the place of final rest. Krol(2) described that in the conventional path of insertion, all the rests are seated more or less simultaneously but in the use of the rotational path one segment of the partial denture is seated first then the remainder of the prosthesis is rotated into position. The rotational path of insertion is limited primarily to the tooth borne prosthesis. Its great advantages are the elimination of anterior clasps to improve ethetic and reduction of tooth coverage to minimize plaque accumulation. Either a rigid minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface below the height of contour as indicated at a o-degree tilt. A specially designed rest in conjunction with this retentive component satisfies the basic requirements of clasp design. The purpose of this study was a clinical evaluation of rotational path removable partial dentures. Author delivered rotational path removable partial dentures to three different cases of patients and evaluated function of the dentures, difficulties of removal and insertion of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of the rotational path removable partial dentures was excellent.

• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.597-601
• /
• 2008

Currently knowledge of strain in welds has mainly been obtained from strain gaging method: that is directly attaching most of the material to the gage. The very few non-contact methods are still in the early stage. One of the non-contact methods is by the use of the laser that has high-level of the accuracy for the measurement, and this laser also has excellent characteristics on which many studies for its applications are focused throughout the many fields. A method of study is on the measurement of the strain caused by the characteristics of the spot welded zone which is used with 3-D ESPI system that is functionally modified through the laser ESPI(Electronic Speckle Pattern Interferometry) system. This system employed the SGCC 1.2t which are mainly used for the steel plate such as automobile, structure, building material and electronic appliances.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권1호
• /
• pp.9-16
• /
• 2017

The performance test is conducted for the purpose of determining the accurate thermal performance of the power generation facility or deriving the factors of thermal efficiency degradation. Compared to the acquisition method of power plant thermal performance test data by compensating cable or transmission cable, performance test using wireless instrument can acquire digital data in order to shorten the period due to installation and demolition of instrument and enhance safety of workers and relatively accurate data can be acquired thereby improving work efficiency. Wireless instruments have already been introduced to the market a long time ago, and some of them are used in industry such as petrochemical industry. However, there is no example which has been conducted for performance test of power generation facilities. In order to apply power generation facilities, a reliable system capable of acquiring performance data smoothly without affecting the control system is required. The wireless measurement system can eliminate the measurement defects and errors such as the damage due to the movement of the connecting cable, the extension due to the extension of the shield wire, the contact failure at the contact point between the measuring sensor and the connecting wire, This method has the advantage of collecting relatively accurate performance test data.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2009

The present study focused on the segmented cell which has the similar performance to unaltered (not segmented) cell in real operating condition. Many literatures have been made the segmented cell to observe the behavior of local current density distribution in the single cell. However, it has been lack of scheme to segment the cell in that the detailed interpretation of segmenting in analytic point of view was insufficient. Hence, the basic idea of segmenting was introduced to determine the component to be segmented in anode side of unit cell. The electrical contact/bulk resistance was measured by using four wire/probe method through each part of cell components including MEA, GDL, Bipolar Plate and Current Collector. Electron transport mechanism was predicted by comparing resistance values which were obtained from the experiment. As a result, this offered a great benefit to segment the cell efficiently. With this method further experiments would be conducted in research areas which require current density distribution at the same operating condition as unaltered cell.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.255-260
• /
• 1998

Ionized magnetron sputtering은 high density plasma를 사용하여 스퍼터된 입자의 이온화율을 기판에서의 플럭스 기준으로 80%이상까지 증대시킬 수 있는 방법으로 반도체 소자의 아주 작은 홀이나 via contact등을 채울 수 있는 아주 유용한 수단이나 가스의 압력 이 30mTorr 이상으로 상당히 높아야만 이온화율이 높게 유지되어 스퍼터 증착 속도가 느려 지고 중성입자의 각도 분포가 넓어지는 단점이 있다. 그 원인이 스퍼터된 입자들에 의한 전 자 온도의 급격한 감소와 타겟 주변에서의 가스 희귀화 현상에 있다고 보고 이를 보완하고 자 스퍼터 전력을 펄스화 하는 방법을 고안하여 실험하였다. 그 결과 펄스의 on/off time이 10ms/10ms, 100ms/100ms에서 가장 높은 이온화율을 가시광 분광 결과에서 보였으며 실제 로 Ag의 XRD결과 (111)에서 (200)으로 우선 방위의 현격한 변화가 관찰되었다. 이를 고전 력 스퍼터링에 의한 중성 가스 가열과 냉각의 측면에서 해석하였다.