• 한국경영과학회지
• /
• 제16권1호
• /
• pp.13-34
• /
• 1991

A production/inventory system is considered in which a production facility produces one type of product. The demand for the product is given by a compound Poison process and is supplied directly from inventory when inventory is available and is lost when inventory is out of stock. The processing time to produce one item is assumes to follow a general distribution. An (s, S) policy is considered in which production stops at the instant the stock on hand reachs S and the setup of the production facility begins at an inspection point when the stock on hand drops to or below s for the first time. The time interval between two successive inspection points during a non-production period is a random variable which follows a general distribution.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.111-119
• /
• 2015

다양한 HMD(Head Mounted Display)의 등장으로 입체영상 제작은 VR(Virtual Reality)기술을 접목 가능하게 되었고 체감형, 몰입형 영상콘텐츠 제작의 활성화에 기여하고 있다. VR기반 영상콘텐츠는 애니메이션과 게임으로 시작하여 실사영상에 이르기까지 엔터테인먼트산업 전반으로 활용성을 넓혀가고 있으며 동시에 VR 영상콘텐츠 제작을 위한 솔루션 개발도 탄력을 받고 있다. 그러나 기존의 제작 솔루션 중 고정된 양안카메라 기반촬영은 사용자의 양안시차가 고정된다는 한계점을 가지고 있다. 이것은 제작자가 연출하고자 하는 표현을 제한할 뿐만 아니라 사용자입장에서의 시야조건이 고려되지 않아 입체감과 공간감을 충분히 느끼지 못할 수 있다. 본 논문은 실사 VR 영상콘텐츠 제작에서 발생하는 컨버전스 포인트(Convergence Point) 조절의 한계를 입체영상 제작의 후반작업 기술을 통하여 해결하고자 한다. 입체영상 후반작업에서 컨버전스 포인트 조절에 대한 유효성을 양안시차의 시각화를 통하여 분석하고 게임엔진에 적용하여 컨버전스 포인트가 사용자 임의로 조절 가능하도록 구현한다.

• 한국초지조사료학회지
• /
• 제32권1호
• /
• pp.75-84
• /
• 2012

본 연구는 겨울철과 여름철에 답리작 사료작물의 랩사일리지 생산에서 연구보고된 조사료 재배품종과 재배방법을 기준으로 하였을 때, 소요 기계에 따른 기계화 생산 작업의 특성과 부담면적, 기계 이용비용을 분석하여 조사료 생산비용을 산출하였다. 생산비용은 작물종류(호밀, 청보리, IRG, 수단그라스), 파종방법(산파, 조파)과 트랙터 마력(50, 75, 100, 130 ps)에 따른 경작규모별(부담면적 ha별), 부담면적대비 경작지비율별(25, 50, 75, 100%), 작부체계별(품종 숙기별, 동 하계 작물별)로 분류하여 산출하였다. 트랙터 100 ps, 조파를 기준으로 단일 품종 재배보다 호밀, IRG와 청보리 등을 품종 숙기별로 재배할 때 파종은 20일에서 30일로, 수확은 약 30일에서 40일로 시기가 늘어나기 때문에 부담면적이 57.1 ha에서 77.5 ha로 증가하였다. 동 하계 작물 연중 재배시 생산비용은 100 ps 트랙터, 조파, kg-TDN 기준으로 호밀+수단은 250원, 청보리+수단은 215원, IRG+수단은 234원, 호밀+청보리+IRG+수단은 233원으로 나타났다. 이는 연중 재배하지 않는 경우에 비해 고정비가 줄어들기 때문에 생산비용은 약 30~50% 절감되었다. 따라서 답리작 사료작물의 랩사일리지 생산시 노동피크와 수확시기의 분산, 기계장비의 효율성을 제고할 수 있도록 품종 숙기별 연중 재배 작부체계의 이용이 바람직한 것으로 판단되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.253-254
• /
• 2023

The production plan of Precast Concrete members is closely related to the assembly plan of Precast Concrete members, and is an important management factor for the process planning of Precast Concrete construction. This may cause a delay in the construction period due to manufacturing errors occurring in the production process of members and transportation errors according to the production sequence. Therefore, it is necessary to have an efficient production plan for Precast Concrete members that can produce the necessary quantity from the point of assembly of the members and supply them in a timely manner. This study is a basic study for establishing a production plan for Precast Concrete members, and the purpose of the study is to examine the factors that affect the establishment of a production plan for Precast Concrete members. In this study, the influencing factors according to the production method and conditions when establishing a production plan for Precast Concrete members were considered. In the future, correlation analysis among influencing factors will be carried out, and it is expected that it will be used as basic data for schedule management of Precast Concrete construction and derivation of construction period calculation standards.

• Journal of applied mathematics & informatics
• /
• 제27권3_4호
• /
• pp.567-579
• /
• 2009

Recently, Peng et al. proposed a primal-dual interior-point method with new search direction and self-regular proximity for LP. This new large-update method has the currently best theoretical performance with polynomial complexity of O($n^{\frac{q+1}{2q}}\;{\log}\;{\frac{n}{\varepsilon}}$). In this paper we use this search direction to propose a primal-dual interior-point method for convex quadratic programming (QP). We overcome the difficulty in analyzing the complexity of the primal-dual interior-point methods for convex quadratic programming, and obtain the same polynomial complexity of O($n^{\frac{q+1}{2q}}\;{\log}\;{\frac{n}{\varepsilon}}$) for convex quadratic programming.

• 한국산업융합학회 논문집
• /
• 제13권4호
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• 중국학논총
• /
• 제66호
• /
• pp.161-188
• /
• 2020

The purpose of this paper is to analyze the debate on the Lewisian turning point in China. Despite the heated debate and accumulating research results both inside and outside China, the results showed a very complex spectrum. Different results were presented depending on which criteria the researcher selected, which analytical tools were used, and which data were utilized. Territory of China is vast, and the differences in economic basement and development stages between regions are not only severe, but also the economic gap among areas in a region is big. Therefore, it is difficult to have a significant meaning in analyzing the Lewisian Turning Point China as a whole. In addition, China's industrial production and labor force structure remain very unbalanced. This can be said to be due to the fact that the allocation and relocation of labor force according to the stage of economic development has not been achieved reasonably, and so it confuses the task of determining whether the Lewis Turning Point has arrived of not.

• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.397-402
• /
• 2023

With the rapid adoption of 5G, the gaming industry has undergone significant innovation, with the quality of game content and player experience becoming the focal point of attention. ZBrush, as a professional digital sculpting software, plays a crucial role in the production of 3D game models. In this paper, we explore the application methods and techniques of ZBrush in game weapons production through specific case analyses. We provide a detailed analysis of two game weapon models, discussing the design and modeling process, lowto-high poly conversion, UV unwrapping and texture baking, material texture creation and optimization, and final rendering. By comparing the production process and analyzing the advantages and disadvantages of ZBrush, we establish a theoretical foundation for further design research and provide reference materials for game industry professionals, aiming to achieve higher quality and efficiency in 3D game model production.

• 융복합기술연구소 논문집
• /
• 제3권1호
• /
• pp.9-14
• /
• 2013

Recently, the development of renewable energy sources in Mongolia has been needed due to climate change and air pollution in Ulaanbaatar as rapid economic growth. Biodiesel can be considered as an alternative fuel for petroleum based diesel in order to decrease air pollution in Ulaanbaatar because of its no emission of particle materials from internal combustion engine in automobile. Rapeseed oil having low cloud point and pour point was suggested as a promising raw material for biodiesel production in Mongolia. Considering high population density and severe air pollution by particle materials and SOx in Ulaanbaatar, prior supplying site of biodiesel in Mongolia was the capital region including Ulaanbaatar. In the production of biodiesel in Mongolia, adsorption process was a effective alternative to washing process for the removal of residual alkali catalyst and reactants due to long winter time in Mongolia. For the stable supply of biodiesel, subsidy and no tax policy is needed in the early stage of biodiesel supply in Mongolia.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.272-282
• /
• 2000

Based on numerical reduced minimization theory, new anisoparametric 3-node elements for out-of-plane curved beam are developed. The elements are designed to be free from spurious constraints. In this paper, the effect of the Jacobian upon numerical solution is analyzed and predicted through reduced minimization analysis of anisoparametric 3-node elements with different Jacobian assumption. The prediction is verified by numerical tests for circular and spiral out-of-plane deformable curved beam models. This paper proposes two kinds of 3-node elements with 7-DOF; one element employs 2-point integration for all strains, and the other element uses 3-point integration with a constant Jacobian within element for calculation of shear strain.