• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.470-480
• /
• 2019

The Doam lake watershed was designated as a non-point pollution management area in 2007 to improve water quality based on watershed management implementation. There have been studies of non-point source reduction with respect to the watershed management impacting the pollutant transport of the reservoir. However, a little attention has been focused on the impact of water quality improvement by the management of the dam operation or the guidelines on the dam operation. In this study, the impact of in-lake management practices combined with watershed management is analyzed, and the appropriate guidelines on the operation of the dam are suggested. The integrated modeling system by coupling with the watershed model (HSPF) and reservoir water quality model (CE-QUAL-W2) was applied for analyzing the impact of water quality management practices. A scenario implemented with sedimentation basin and suspended matter barrier showed decrease in SS concentration up to 4.6%. The SS concentration increased in the scenarios adjusting withdrawal location from EL.673 m to the upper direction(EL.683 m and EL.688 m). The water quality was comparably high when the scenario implemented all in-lake practices with water intake at EL.673 m. However, there was improvement in water quality when the height of the water intake was moved to EL.688 m during the summer by preventing sediments inflow after the rainfall. Therefore, to manage water quality of the Doam lake, it is essential to control the water quality by modulating the height of water intake through consistent turbidity monitoring during rainfall.

• Industrial Engineering and Management Systems
• /
• v.14 no.3
• /
• pp.221-235
• /
• 2015

Risk assessment is an important phase of risk management. It is the stage in which risk is measured thoroughly to achieve effective management. Some factors such as probability and impact of risk have been used in the literature related to construction projects. Because in high-rise projects safety issues are paramount, this study has tried to develop a quantifying technique that takes into account three factors: probability, impact and Safety Performance Index (SPI) where the SPI is defined as the capability of an appropriate response to reduce or limit the effect of an event after its occurrence with regard to safety pertaining to a project. Regarding risk-related literatures which cover an uncertain subject, the proposed method developed in this research is based on a fuzzy logic approach. This approach entails a questionnaire in which the subjectivity and vagueness of responses is dealt with by using triangular fuzzy numbers instead of linguistic terms. This method returns a Risk Critical Point (RCP) on a zoning chart that places risks under categories: critical, critical-probability, critical-impact, and non-critical. The high-rise project in the execution phase has been taken as a case study to confirm the applicability of the proposed method. The monitoring results showed that the RCP method has the inherent ability to be extended to subsequent applications in the phases of risk response and control.

• Journal of Industrial Convergence
• /
• v.5 no.2
• /
• pp.33-51
• /
• 2007

environmental has given rise to a world where consumer persue satisfaction in quality and quantity of products. From this point of view, a study of the impact of logo design on brand association and consumer emotions is very important and useful. For this study, we investigate on the basis of preceding studies. Finally, it is thought that it will be necessary to conduct a more specific study on the relation between brand association and consumer emotions.

• Journal of Korean Society on Water Environment
• /
• v.33 no.3
• /
• pp.247-255
• /
• 2017

This research was conducted to analyze removal efficiencies of non-point pollution source (NPS) in low impact development (LID) facilities with vegetation. In this research, removal efficiencies of NPS were calculated using rainfall monitoring data for 5 years in grassed swale (GS) and vegetative filter strip (VFS). TSS was greater than other pollutants, and it ranged 11.9 ~ 351.7 mg/L in GS and 12.8 ~ 350.7 mg/L in VFS. Outflow EMCs were reduced than inflow EMCs, overall removal efficiencies of NPS were 67 ~ 86% in GS and 63 ~ 91% in VFS. 50 % reduction efficiency of rainfall runoff was observed between inflow and outflow in each LID facility. TSS removal efficiency in GS and VFS was correlated with rainfall characteristics. The rainfall for TSS removal efficiency over 50% was determined about 31 mm, 34 mm and average rainfall intensity was 3.0 mm/hr, 3.9 mm/hr in GS and VFS. Therefore, GS and VFS were regarded effective LID facilities as removal of pollutants and rainfall runoff. Also, this research result can be used as an important data for management of NPS.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.269-272
• /
• 2002

Turbidity currents, often develop after heavy storm events, deliver various non-point pollutants and tend to lead eutrophication, depressed dissolved oxygen, and sedimentation in reservoirs. Field observations were performed to investigate the flow regimes of turbidity currents and their impact on reservoir water quality in Daecheong Reservoir. A 2D laterally-averaged hydrodynamic and water quality model was applied to simulate the temporal and spatial distributions of turbidity in the reservoir, and evaluated by comparing with the field data.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.711-718
• /
• 2017

Nanotechnology is a new filed in concrete structures which can improve the mechanical properties of them in confronting to impact and blast. However, in this paper, a mathematical model is introduced for the concrete models subjected to impact load for wave propagation analysis. The structure is simulated by the sinusoidal shear deformation theory (SSDT) and the governing equations of the concrete model are derived by energy method and Hamilton's principle. The silicon dioxide ($SiO_2$) nanoparticles are used as reinforcement for the concrete model where the characteristics of the equivalent composite are determined using Mori-Tanaka approach. An exact solution is applied for obtaining the maximum velocity of the model. In order to validate the theoretical results, three square models with different impact point and Geophone situations are tested experimentally. The effect of different parameters such as $SiO_2$ nanoparticles volume percent, situation of the impact, length, width and thickness of the model as well as velocity, diameter and height of impactor are shown on the maximum velocity of the model. Results indicate that the theoretical and experimental dates are in a close agreement with each other. In addition, using from $SiO_2$ nanoparticles leads to increase in the stiffness and consequently maximum velocity of the model.

• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.45-60
• /
• 2016

Elderly women have a high risk of falling down in their daily lives. The purpose of this study is to develop protective pants for elderly women, which will mitigate the impact of falls, and play a major role in reducing injuries. The two types of design were proposed for development of protective pants by selecting pad insertion point and inserting lining for keeping pad in place through the checklist to investigate from the interviews with the medical workers and the investigation of the user requirement. Design A has protective pads in the hip, hip joint, and knee, while design B has protective pads in the hip and hip joint area. For the impact absorbing material, CR (chloroprene rubber) foam was selected for its flexibility, lightness, and impact absorbing capacity, and its pad shapes were designed to produce much flexibility in consideration of the activity and human body fitness of the wearers. Three kinds of pad types, which are the cut type, the porous type, and the honeycomb type, were proposed, and were manufactured to fit into the protective parts according to their design types.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.159-166
• /
• 2019

In this paper, we propose takes network marketing as a starting point for analysis, uses the theory of purchasing behavior and enterprise performance to analyze the network marketing strategy of artistic products, incorporates the practical problems encountered by some artistic products enterprises in Zhejiang Province in network marketing into theoretical research. The theoretical model of network marketing strategy acting on enterprise performance through the intermediary effect of purchasing behavior is constructed. This paper conducted an in-depth survey of three representative core domestic companies engaged in Internet marketing of artistic products, and analyzed the questionnaires of 357 respondents. The initial model was verified by statistical tools such as SPSS and AMOS, and three conclusions were drawn: Firstly, network marketing strategies of different dimensions have different effects on purchasing behavior: pricing strategy and product strategy have significant positive effects on impulse purchasing behavior, but channel strategy has no significant impact on impulse purchasing behavior; Channel strategy and product strategy have a significant positive impact on repeated purchasing behavior, but pricing strategy has no significant impact on repeated purchasing behavior. Second, user purchasing behavior has a significant positive impact on enterprise performance. Third, network marketing strategies of different dimensions have significant direct and positive impact on enterprise performance.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.751-762
• /
• 2021

This study aims to examine whether an increased disclosure has a positive impact on firm performance and whether the opposite impact of increased disclosure on firm performance can occur in certain conditions - high proprietary information and competition. The sample for this study consists of Indonesian firms listed on the Indonesia Stock Exchange (IDX). The data were selected based on purposive sampling and panel data spanned eleven years (2006-2016). A panel GLS regression using moderated regression analysis (MRA) was adopted. The results of this study reveal that an increased disclosure has a positive effect on firm performance, but an increased disclosure has a negative impact on firm performance when proprietary information is high, and vice versa. Also, if the disclosure is increased, the negative impact of proprietary information on firm performance will get exacerbated in conditions where the competition level is high. The findings of this study suggest that, since the positive effect of continuously-increased disclosure on firm performance leads to the reversal (negative) impact when certain conditions occur (high proprietary information and competition), the level of disclosure quality is most likely to tap an 'optimal' point. In this regard, however, a broader investigation of all firms across countries still needs to be conducted.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.5-10
• /
• 1995

공학분야에서 흔히 접하게 되는 접촉충격 문제들의 해석을 위해 접촉충격의 지배방정식과 효율적인 해석방법인 pinball contact-impact 알고리즘에 대해 기술하였다. 예제로 보여준 충돌하는 두 구조계의 접촉충격 해석과 자동차의 crashworthiness 해석결과들은 전술한 알고리즘이 매우 효율적임을 입증하고 있다. 자동차의 crashworthiness 해석과 같이 해석대상 모델이 크고 복잡한 경우에는 짧은 경과시간 동안의 거동변화를 파악하고자 하더라도 엄청난 계산시간이 소요된다. 따라서 효율적인 crashworthiness 해석을 위해서는 전술한 접촉충격 알고리즘 외에도, 논외의 대상이라 본문에서 소개하지는 않았으나, 강력한 요소(one-point integration element), 효과적인 비선형 동적해석 알고리즘, 해의 정확도를 높일 수 있는 adaptive method, 효율적인 시간적분을 위한 mixed time integration method(subcycling)와 explicit method 등을 복합적으로 혼합하여 사용하여야 한다.