• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.351-354
• /
• 2003

To inspect point-defect in LCD pannel, calculate period and eliminated pattern. And then find point-defect to compare block image with each period. First processing, Founded over point defects. To reduce wrong point defect. Next, label point-defects and eliminated not surpass fixed limit-size.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.769-775
• /
• 2019

The tensile strength of irradiated 3C-SiC, SiC with artificial point defects, SiC with symmetric tilt grain boundaries (GBs), irradiated SiC with GBs are investigated using molecular dynamics simulations at 300 K. For an irradiated SiC sample, the tensile strength decreases with the increase of irradiation dose. The Young's modulus decreases with the increase of irradiation dose which agrees well with experiment and simulation data. For artificial point defects, the designed point defects dramatically decrease the tensile strength of SiC at low concentration. Among the point defects studied in this work, the vacancies drop the strength the most seriously. SiC symmetric tilt GBs decrease the tensile strength of pure SiC. Under irradiated condition, the tensile strengths of all SiC samples with grain boundaries decrease and converge to certain value because the structures become amorphous and the grain boundaries disappear after high dose irradiation.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1587-1592
• /
• 2021

The effects of the symmetrical tilt Σ5 (310) <001> grain boundary (GB) on the evolution of radiation-induced point defects in pure δ-plutonium (Pu) were studied by Molecular dynamics (MD) simulations. The evolution of radiation-induced point defects was obtained when primary knock-on atom (PKA) was respectively set as -15 Å and 15 Å far from the GB and the number of residual defects was obtained as the distance from PKA to GB was changed. According to the results, compared with vacancies, interstitial atoms were more easily absorbed by GB. In addition, the formation energy of point defects was also calculated. The results showed that there was almost no difference for the formation energy of vacancies in the all matrix. However, the formation energy of interstitial atoms close to the GB was lower than that in the other bulk regions.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.61-67
• /
• 1998

The significance of point defects as relevant centers concerning electrochemical function is highlighted. Starting from the most simple case of dilute equilibrium bulk defect chemistry, influence of defect interaction and in particular the impact of interfaces on point defect redistribution are considered. Then recent progress in the field of kinetics in bulk and at boundaries is discussed. Finally, selected applications with emphasis on battery and sensor technology are presented.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.45-49
• /
• 2004

We examined large particles and filter size effects of Central Chemical Supplying (CCS) system for STI-CMP on Light Point Defects (LPDs) after polishing. As manufacturing process recently gets thinner below 0.1 um line width, it is very important to keep down post-CMP micro-scratch and LPDs in case of STI-CMP. Therefore, we must control the size distribution of large particles in a slurry. With optimization of final filter size, CCS system is one of the solutions for this issue. The oxide and nitride CMP tests were accomplished using nano-ceria slurries made by ourselves. The number of large particles in a slurry and the number of LPDs on the wafer surface after CMP were reduced with decrease of the final filter size. Oxide removal rates slightly changed according to the final filter size, showing the good performance of self-made nano ceria slurries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.845-848
• /
• 2007

Analysis of point defects invisible by a microscope has been studied on the a-Si thin film transistor panel. The point defects which were named Invisible Point Defect (IPD) is characterized by no particles or distortion of patterns on a pixel structure and randomly distributed on panels. To investigate the IPD, measurements were carried out: gray level driving, transistor transfer characteristic, focused ion beam (FIB), and secondary ion mass spectrometry (SIMS). The results showed that a contamination layer had a bad influence on an active surface. The contamination layer consisted of oxygen and iron from a water supply line during cleaning process. After the process tuning, IPD has been stabilized.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.278-279
• /
• 2017

Result from Amendment of Apartment Houses Decree Customer Service, Recently, the starting point of Defects Liability changed "Criteria of Completion date" to "Delivery date to Divided property". Through the Law amended, There are some inconsistency between "Claim for repairing defects" and "Period of security deposit for repairing defects claim". If someone bought a house after Completion date, Purchasing period of "Claim to security deposit for repairing defects" lapsed without renewal. This research is to identify problems and solutions for improving the system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.377-377
• /
• 2010

The $AgInS_2$ epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. After the as-grown $AgInS_2$/GaAS was annealed in Ag-, S-, and In-atmosphere, the origin of point defects of the $AgInS_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of $V_{Ag}$, $V_s$, $Ag_{int}$, and $S_{int}$ obtained from PL measurement were classified to donors or acceptors type

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.215-218
• /
• 2002

This paper use the USB Bulk Communication for interface of eMbedded system. But existing USB Bulk Communication have defects, it only connect point to point. And then this paper defines several command packet to improve such defects. So it improves Data Packet Layer of existing USB Bulk Communication. And then this paper make up for it's defects and implements multiplex communication Protocol in order to connect many eMbedded systems.

• 대한화학회지
• /
• 제57권6호
• /
• pp.677-683
• /
• 2013

A theoretical study of the electronic structures of $TiC_{1-x}$ and $Ti_{1-x}W_xC$ (x = 0, 0.25) is presented. The density of states and crystal orbital overlap population calculations were used to interpret variations of elastic properties induced by carbon vacancies and alloying substitutions. Our results show why the introduction of vacancies into TiC reduces bulk moduli, while W substitution at a Ti site increases the elastic modulus. The effect of the point defects on the bonding in TiC is investigated by means of extended Huckel tight-binding band calculations.