• 한국수산과학회지
• /
• 제38권5호
• /
• pp.316-322
• /
• 2005

In order to develop a floating breakwater, which can efficiently control long period waves, vertical plates are attached in pontoon. Wave control and dynamic behaviors of the newly developed vertical plates type are verified from numerical analysis and hydraulic experiment. As a result, for the wave control and energy dissipation, the newly developed vertical plates type is more efficient than the conventional pontoon type. For the floating body motion, the wave transmission, depending on incident wave period, is decreased at the natural frequency. Dimensionless drift distance has similar trend of the reflection rate of wave transformation near natural frequency except maximum and minimum values. Dimensionless maximum tension is 17 percent of the weight of floating breakwater in case of the conventional pontoon type and 18 percent or 14 percent in case of the newly developed vertical plates type. Thus, it is shown that the wave control is improved by the vertical plates type. In addition, by adjusting the interval of the front and back vertical plate, we would control proper wave control.

• 한국산업융합학회 논문집
• /
• 제4권3호
• /
• pp.295-304
• /
• 2001

The hydrodynamic impact problem was studied from 1929 to recent. Especially, Impact pressure is important for the design of the ships and offshore structure and spacecrafts, and under weapons. A ship traveling at high speed or in heavy sea has its bow and bottom damaged by high pressure caused by impact with and detachment from the water surface. Considerable impact may also occur when large waves hit the cross member or deck plate of an offshore structure within the splash zone. Many engineering cases require consideration of impact pressure, the movement of objects and change of the flow field. This study was obtained the pressure distribution of a falling body that is deadrise angle $0^{\circ}$ and deadrise angle $5^{\circ}$ upon a water surface by the experiment with the impact machine. The theoretical equation was obtained the air region and the interface and the water region which devide 3 parties between the body and the water surface for an investigation of the complete phenomena. Pressure distributions and histories compare favorably with available experimental data. The numerical results are similar to the experimental results for the impact force type with Fo(1+$cos{\pi}t/tc$).

• 대한전자공학회논문지TC
• /
• 제37권5호
• /
• pp.33-41
• /
• 2000

본 논문에서 QMSA에 전기력선의 제한이 없도록 용량을 장하한 대칭형 QMSA(Quarter-Wavelegth Microstrip Antenna)를 제안했다. 제안된 안테나는 용량을 장하하기 위해서 QMSA에 오른쪽 평행 평판을 구성한 비대칭 QMSA보다 개선된 대역폭을 얻었다. 설계·제작된 안테나는 동작 주파수가 2.13GHz에서 수직 수평 편파를 수신할 수 있다. 그러므로 이 안테나는 무선 전화를 위한 소형화된 안테나로 이용할 수 있고 실내 통신을 위해 아주 유용하다. 전송 선로 모델의 안테나 등가 회로는 정확한 공진 주파수를 찾기 위해 설계되었고, 반사손실 값을 계산했다. 계산된 값은 실험값과 양호하게 일치되었다.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.87-92
• /
• 2013

The variation in the course keeping ability in relation to rudder type is investigated using simulations with 3 different types of rudders (a normal rudder, normal rudder with a plate, and Schilling rudder) under wave conditions. The simulation is developed based on an MMG model with Kijima's regression model, along with the data from Son's experiments and Kose's experiments. A 3-D source distribution method is applied to calculate the source of the external wave forces for the simulation. The coefficients of an autopilot controller that may affect the course keeping ability are also estimated from the simulations with the different rudders. The course keeping ability is evaluated by comparing the forward distances while the ships are simulated with the rudders and autopilot controller.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.322-329
• /
• 2001

A study of the shock wave turbulent boundary layer interaction is presented. The focus of the study is the interactions of the shock waves with the turbulent boundary layer on the falt plate. Three examples are investigated. The computations are performed, using mixed explicit-implicit generalized Galerkin finite element method. The linear equations at each time step are solved by a preconditioned GMRES algorithm. Numerical results indicate that the implicit scheme converges to the asymptotic steady state much faster than the explicit counterpart. The computed surface pressures and skin friction coefficients display good agreement with experimental data. The flowfield manifests a complex shock wave system and a pair of counter-rotating vortices.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.94-100
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of detect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But, in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion own. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• 한국해안해양공학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2004

본 연구에서는 원전어항에서 채용하고 있는 강제 부방파제에 비해 소요재료량의 변화가 크지 않은 범위에서 전후연직판의 위치와 형식의 변화 및 수평판의 부착 유무에 따른 여러 형식의 부방파제에 의한 투과율과 반사율을 Green 함수법으로부터 계산한 결과에 기초하여, 원전어항의 강제 부방파제보다 단주기파 및 장주기파를 보다 효과적으로 제어할 수 있는 새로운 형식의 부방파제를 검토하였다. 이로부터 연직커튼판 하부에 수평판을 부착한 형태의 부방파제가 파랑제어기능이 우수한 것으로 판명되었고, 이는 원전어항 부방파제보다 파랑제어기능이 탁월하다는 것을 알 수 있었다. 또한, 본체에 부착된 전후연직판 및 수평판의 크기와 간격을 조절함으로써 적합한 투과파를 얻을 수 있다는 것도 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.856-859
• /
• 2005

The OPMT(Orientation-adjustable Patch-type Magnetostrictive Transducer) was proposed as a tool for generating and measuring the ultrasonic Lamb wave in plate type structures. This sensor has a lot of new features compared to the traditional piezo-type ultrasonic transducers. As an example, it does not need any kind of wiring for lunching or measuring ultrasonic waves. But it has also definite limitation for practical usage as a nondestructive testing tool in that it cannot help rotating the direction of ultrasonic wave manually. The idea for 'scanning OPMT' is proposed in this respect. Two kinds of basic ideas for rotating the wave direction not manually but electrically are proposed. The fabrication of the transducer and the testing for Identifying the primary characteristics are done for one of the proposed transducers. The results says that there are the possibilities as a new tool for NDE in that the proposed transducer follows well the characteristics of the traditional OPMT. But there are also the 1imitations to overcome.

• Advances in nano research
• /
• 제10권2호
• /
• pp.101-114
• /
• 2021

An analytical investigation has been performed on the mechanical performance of waves propagated in a Single-Layered Graphene Sheet (SLGS) when an In-plane Varying Bending (IVB) load is interacted. It has been supposed that the Graphene Sheet (GS) is located on an elastic medium. Employing a two-parameter elastic foundation, the effects of elastic substrate on the GS behavior are modeled. Besides, the kinematic equations are derived by the means of a trigonometric two-variable refined plate theory. Moreover, in order to indicate the size-dependency of the SLGS, a Nonlocal Strain Gradient Theory (NSGT) was considered. The nonlocal governing differential equations are achieved in the framework of Hamilton's Principle (HP). Also, an analytical approach was used to detect the unknowns of the final eigenvalue equation. Finally, the effects of each parameters using some dispersion charts were determined.

• 한국전산구조공학회논문집
• /
• 제29권3호
• /
• pp.285-292
• /
• 2016

본 연구에서는 부유구조물 모델링의 효율성 및 응답의 정확성을 분석하기 위해 유체 영역을 압력으로 정의한 유탄성 해석법에 1차원 보-2차원 유체 결합의 1차원 문제와 2차원 판-3차원 유체 결합의 2차원 문제를 적용하여 수치해석을 수행하였다. 그리고 1차원 문제와 2차원 문제의 모델링 차원에 따른 응답을 비교하기 위해 다양한 평판의 변장비와 입사파의 조건을 적용하였다. 이에 따르면 강체거동의 영향이 큰 장주기파에서는 변장비가 변하더라도 두 문제의 유탄성 응답이 거의 유사하게 나타나지만 탄성거동의 영향이 지배적인 단주기파에서는 모델링 차원에 따라 뚜렷한 차이가 발생한다. 즉, 1차원 보 모델은 비록 입사파의 각도는 고려할 수 없지만 평판의 변장비가 클 경우에 유탄성 해석에 적용이 가능하다. 또한, 2차원 평판보다 단순화된 모델링 조건으로서 부유구조물의 전반적인 응답을 분석할 수 있을 뿐만 아니라 수치해석의 효율을 높일 수 있다.