• Title/Summary/Keyword: plasma flow

Search Result 1,179, Processing Time 0.029 seconds

Fluxon resonance steps in the $Bi_2Sr_2CaCu_2O_{8+x}$ single crystals

  • Bae, Myung-Ho;Lee, Hu-Jong
    • Progress in Superconductivity
    • /
    • v.8 no.2
    • /
    • pp.138-142
    • /
    • 2007
  • We observed discrete fluxon-flow resonance steps in high magnetic fields in a stack of Josephson junctions with lateral size of $1.5{\times}17{\mu}m^2$. The measurement sample was prepared by sandwiching a stack of $Bi_2Sr_2CaCu_2O_{8+x}$ intrinsic Josephson junctions between two Au electrodes by using the double-side-cleaving technique. This technique allowed us to isolate the intrinsic Josephson junction structures from the inductive interference of the basal stack. The resonance steps observed are in good agreement with the collective Josephson fluxon dynamics that are in resonance with the plasma oscillation modes inside the stacked Josephson junctions.

  • PDF

A novel surface cleaning process using laser-induced breakdown of liquid (액체의 레이저 유기 절연파괴를 이용한 신개념 표면 세정 공정)

  • Jang, Deok-Suk;Lee, Jong-Myoung;Kim, Dong-Sik
    • Laser Solutions
    • /
    • v.12 no.4
    • /
    • pp.17-25
    • /
    • 2009
  • The surface cleaning method based on the laser-induced breakdown (LIB) of gas and subsequent plasma and shock wave generation can remove small particles from solid surfaces. In the laser shock cleaning (LSC) process, a high-power laser pulse induces optical breakdown of the ambient gas above the solid surface covered with contaminant particles. The subsequently created shock wave followed by a high-speed flow stream detaches the particles. In this work, a novel surface cleaning process using laser-induced breakdown of liquid is introduced and demonstrated. LIB of a micro liquid jet increases the shock wave intensity and thus removes smaller particle than the conventional LSC method. Experiments demonstrate that the cleaning force and cleaning efficiency are also increased significantly by this method.

  • PDF

Quantitative Evaluation of Liver Function with Hepatic Receptor Scintigraphy using Tc-99m Galactosylated Serum Albumin (GSA) (Tc-99m Galactosylated Serum Albumin (GSA)을 이용한 정량적 간수용체 영상술)

  • Lee, Jae-Tae
    • The Korean Journal of Nuclear Medicine
    • /
    • v.32 no.4
    • /
    • pp.305-313
    • /
    • 1998
  • The reduction in the amount of asialoglycoprotein (ASGP) receptor, which resides exclusively on the plasma membrane of functioning mammalian hepatocytes, as a consequence of hepato-cellular damage has been demonstrated in various pathologic conditions of the liver. Galac-tosylated human serum albumin (GSA) is a newly developed receptor-binding agent, specific for the ASGP receptor. Tc-99m GSA binds quantitatively to liver ASGP receptors and the rate of accumulation in the liver is dependent on hepatic function represented as the amount of receptor, as well as the amount of ligand injected, its affinity to the receptor and the hepatic blood flow. The findings of Tc-99m GSA scintigraphy were reported to reflect the hepatic function of the patients with large hepatic tumors, obstructive jaundice, acute and chronic liver disease. Tc-99m GSA scintigraphy is an easy and reliable test and has the clinical potentials to evaluate the liver function in the patients with hepatic disorders.

  • PDF

PRIMORDIAL BLACKHOLE AS A SEED FOR THE COSMIC MAGNETIC FIELD

  • LA DAIL;PARK CHANGBOM
    • Journal of The Korean Astronomical Society
    • /
    • v.29 no.2
    • /
    • pp.83-91
    • /
    • 1996
  • We present a model that rotating primordial blackholes(PBHs) produced at the end of inflation generate the random, non-oriented primordial magnetic field. PBHs are copiously produced as the Universe completes the cosmic phase transition via bubble nucleation and tunneling processes in the extended inflation hypothesis. The PBHs produced acquire angular momentum through the mutual tidal gravitational interaction. For PBHs of mass less than 1013g, one can show that the evaporation (photon) luminosity of PBHs exceeds the Eddington limit. Thus throughout the lifetime of the rotating PBH, radiation flow from the central blackhole along the Kerr-geodesic exerts torque to ambient plasma. In the process similar to the Bierman's battery mechanism electron current reaching up to the horizon scale is induced. For PBHs of Grand Unified Theories extended inflation with the symmetry breaking temperature of $T_{GUT}\;\~\;10^{10}$ GeV, which evaporate near decoupling, we find that they generate random, non-oriented magnetic fields of $\~10^{-11}G$ on the last-scattering surface on (the present comoving) scales of $\~O(10)Mpc$.

  • PDF

PDF properties of ISM turbulence

  • Jo, Hyeon-Jin;Gang, Hye-Seong;Ryu, Dong-Su;Kim, Jong-Su;Jo, Jeong-Yeon
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.36 no.2
    • /
    • pp.107.1-107.1
    • /
    • 2011
  • Density Probability Distribution Functions (PDFs) are a classic statistical way to study properties of Interstellar Medium (ISM) turbulence. In our three-dimensional MHD simulations, density PDFs of the position-position velocity (PPV) spaces are close to a log-normal distribution. the PDF widths depend on the plasma parameters such as magnetic strength and sonic Mach number. Futhermore, we compare these simulations results to Galactic molecular clouds observed by Jackson et. al (2006). By fitting of the velocity dispersion in the spectral line observation, volume density PDFs of the defined molecular clouds indicate that the sound speeds of the turbulences seem to have a few times larger than the simulation results. In order to understand the inconsistency with general characteristics of turbulence, we consider other simulations inducing the turbulent flow randomly at small driving scales. We find that the density PDF width decreases at more smaller driving scale. Finally, the simulations suggest that sources of ISM turbulence in Galactic molecular clouds can be important on small scales.

  • PDF

Low dielectric material etching technology for Cu interconnection (Plasma를 이용한 구리배선용 저유전 물질의 etching에 대한 연구)

  • Lee, Kil-Hun;Jung, Do-Hyun;Choi, Jong-Sun
    • Proceedings of the KIEE Conference
    • /
    • 2000.11c
    • /
    • pp.519-521
    • /
    • 2000
  • The application of low dieletric constant material instead of $SiO_2$ has been considered to reduce interconnection delay, crosstalk, power exhaustion. Methylsilsesquioxane (MSSQ) have a dieletric constant less than k>3 which is lower than that for the convention $SiO_2$ insulator ($k{\sim}4$). The Propose of this study is to know etching rate of MSSQ. Expermentation in this paper use RIE(Reactive ion Etching) and centre) flow rate of $CF_4/O_2$ gas, RF power.

  • PDF

Micro Fluidic Component for a Blood Analysis System (혈액분석기용 유체소자의 설계기술 개발)

  • Kim, Jae Yun;Kim, Duckjong;Heo, Pil Woo;Park, Sang-Jin;Yoon, Eui Soo
    • 유체기계공업학회:학술대회논문집
    • /
    • 2004.12a
    • /
    • pp.754-760
    • /
    • 2004
  • The miniaturization and integration are trend of modern blood analyses. Micro-Bio-Fluidics plays an important role in a micro blood analysis system. In this paper, analysis and design technology for blood analysis system is presented. Numerical simulations of a blood flow in micro separator and reservoir are conducted. As a result, we suggest on-chip micro separator, which performed plasma separation from whole blood in micro channels.

  • PDF

Tribological and mechanical properties of plasssma sprayed 316L and 420 stainless steel layers on the AZ91D commercial magesium alloy (AZ91D 상용 마그네슘합금위에 316L과 420의 스테인레스 스틸의 플라즈마 코팅층의 마모와 기계적 특성)

  • 이수완;박종문;이명호;짐진수
    • Journal of the Korean institute of surface engineering
    • /
    • v.30 no.6
    • /
    • pp.365-373
    • /
    • 1997
  • 316L and 420 Stainless steels were deposited onto AZ9ID commercial magnesium alloy by plasma spray process with various gas flow rate of, TEX>$H_2$ secondary gas. And hardness as well as were track volume, coefficient of friction also had been measured. wear and hardness were measured by using reciprocal configuration tribometer and microghardness tester, respectively. Also, the microstructure of the coatings surface the cross sectional area of coating surface and cross sectional area of coaing/Substrate interface had been analyzed with Scanning Electron Microscope(SEM) and Optical microscope(OM). Finally, optimal process parameters for the improvement of coating efficiency such as mechanical property and wear behavior were examined.

  • PDF

Synthesis and Characterization of Al2O3/ZrO2, Al2O3/TiO2 and Al2O3/ZrO2/TiO2 Ceramic Composite Particles Prepared by Ultrasonic Spray Pyrolysis

  • Shim, In-Soo;Lee, Chang-Seop
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.8
    • /
    • pp.1127-1134
    • /
    • 2002
  • Fine ceramic particles of zirconia toughened alumina (ZTA), titania toughened alumina (TTA), and zirconia-titania toughened alumina (ZTTA) have been synthesized by ultrasonic spray pyrolysis (USP) at various temperatures from starting salt solutio ns of various compositions aiming for the development of catalytic material. These particles were characterized for properties such as shape, size and size distribution, diffraction pattern, and chemical and phase composition of elements by scanning electron microscopy (SEM), particle size analyzer (PSA), x-ray diffraction (XRD), and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Chemical compositions and sizes of ceramic composites have been controled by the stoichiometry of salt solutions and the flow rate of spraying solutions. The optimum experimental conditions for the various composite particle syntheses have been proposed.

Zn$_2SiO_4$ : Mn Phosphor Particles Prepared by Spray Pyrolysis Process

  • Kang, Yun-Chan;Park, Hee-Dong;Lim, Mi-Ae
    • Journal of Information Display
    • /
    • v.2 no.4
    • /
    • pp.57-62
    • /
    • 2001
  • Green-emitting $Zn_2SiO_4$:Mn phosphor particles having a spherical shape and high luminescence intensities under VUV were prepared by spray pyrolysis process under severe preparation conditions. The type of precursor solutions affected the morphology and luminescence characteristics of the prepared particles. The particles prepared from the clear solution by laboratory-scale process had spherical shape and dense morphology, while the particles prepared from the severe preparation conditions had rough surface and collapsed structure. However, the particles prepared from the colloidal solution utilizing fumed silica were spherical in shape and filled morphology at the severe preparation conditions of high flow rate of carrier gas, high concentration of solution, and large reactor size. The prepared $Zn_2SiO_4$:Mn phosphor particles with complete spherical shape had higher photoluminescence intensity than that of the commercial product prepared by solid state reaction.

  • PDF