• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.825-830
• /
• 1999

Characteristics of SiOF films deposited by a FTES/$O_2$-plasma enhanced chemical vapor deposition method have been investigated using Fourier transform infrared spectroscopy, X-ray photoelectro spectroscopy, and ellipsometry. Electrical properties such as dielectric constant, dielectric breakdown and leakage current density are investigated using C-V and I-V measurements with MIS(Au/SiOF/p-Si) capacitor structure. Stepcoverage of the films have been also characterized using scanning electron microscopy and ellipsometry. A high quality SiOF film was formed on that the flow rates of FTES and $O_2$were 300sccm, respectively. The dielectric constant of the deposited SiOF film was about 3.1. This value is lower than that of the oxide films obtained using other method. The dielectric breakdown field and leakage current are more than 10MV/cm and about $8[\times}10^{9}A/\textrm{cm}^2$, respectively. The deposited SiOF film with thickness as $2500{\AA}$ on the $0.3{\mu}{\textrm}{m}$ metal pattern shows a high step-coverage without a void.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1067-1073
• /
• 1998

High quality diamond films of the silicon on diamond (SOD) structure are deposited using CO and $H_2$ gas mixture in microwave plasma chemical vapor deposition (CVD), a SOD structure is fabricated using low pressure CVD polysilicon on diamond/ Si(100) substrate. The crystalline structure of the diamond films which composed of { 111} and {100} planes. were changed from octahedral one to cubo-octahedron one as the CO/$H_2$ ratios are increased. The high quality diamond films without amorphous carbon and non-diamond elements were deposited at the CO/$H_2$ flow rate of 0.18. and the main phase of the diamond films shows (111) plane. The diamond/Si(lOO) structure shows that the interface is flat without voids. The measured dielectric constant. leakage current and breakdown field were $5.31\times10^{-9}A/cm^2$ and $9\times{10^7}{\Omega}cm$ respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.83-87
• /
• 2002

Plasma enhanced chemical vapor deposited (PECVD) silicon nitride ($SiN_X$) is widely used as a gate dielectric material for the hydrogenated amorphous silicon(a-Si:H) thin film transistors (TFT's). We investigated $SiN_X$ films were deposited PECVD at low temperature ($300^{\circ}C$). The reaction gases were used pure nitrogen and a helium diluted of silane gas(20% $SiH_4$, 80% He). Experimental investigations were carried out with the variation of $N_2/SiH_4$ flow ratios from 3 to 50 and the rf power of 200 W. This article presents the $SiN_X$ gate dielectric studies in terms of deposition rate, hydrogen content, etch rate and C-V, leakage current density characteristics for the gate dielectric layer of thin film transistor applications. Electrical properties were analyzed through high frequency (1MHz) C-V and current-voltage (I-V) measurements. The thickness and the refractive index on the films were measured by ellipsometry and chemical bonds were determined by using an FT-IR equipment.

• The Journal of Internal Korean Medicine
• /
• v.20 no.1
• /
• pp.57-72
• /
• 1999

This study was designed to elucidate the anti-inflammatory, cardiovascular, anti-thrombotic, and analgesic effect of Whalrakdan. The anti-inflammatory effects was measured by the method of carrageenin induced edema, protein leakage test using CMC-pouch, and the effect of Whalrakdan on the cardiovascular system was observed by the change of flow rate of Ringer solution in the vascular system in the ear of rabbit. and the contraction and dilatation of rat tail artery. Death rate, platelet aggregation, plasma coagulation activity, antithrombin activity was observed for the measurement of the anti-thrombotic effect of Whalrakdan, and the analgesic effect was measured by the acetic acid method and hot plate method. The result was as follows: 1. After 2 or 3hour of Whalrakdan administration, carrageenin induced edema and CMC-pouch protein leakage was significantly decreased. 2. The slight anagesic effect of Whalrakdan extract was confirmed by the observation of writhing syndrome, paw licking time, and escape time. 3. The droplet of Ringer solution increased according to the increase of concentration of Whalrakdan extract, and the vasoconstriction decreased dependantly to the concentration of Whalrakdan extract. 4. The anti-thrombotic effect of Whalrakdan was observed by the decrease of death rate, the inhibition of platelet aggregation, and the increase of anti-thrombin activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.328-329
• /
• 2012

$SF_6$ gas는 반도체 및 디스플레이 제조공정 중 Dry etch과정에서 널리 사용되는 gas로 자연적으로 존재하는 것이 아닌 사용 목적에 맞춰 인위적으로 제조된 gas이다. 디스플레이 산업에서 $SF_6$ gas가 사용되는 Dry etch 공정은 주로 ${\alpha}$-Si, $Si_3N_4$ 등 Si계열의 박막을 etch하는데 사용된다. 이러한 Si 계열의 박막을 식각하기 위해서는 fluorine, Chlorine 등이 사용된다. fluorine계열의 gas로는 $SF_6$ gas가 대표적이다. 하지만 $SF_6$ gas는 대표적인 온실가스로 지구 온난화의 주범으로 주목받고 있다. 세계적으로 온실가스의 규제에 대한 움직임이 활발하고, 대한민국은 2020년까지 온실가스 감축목표를 '배출전망치(BAU)대비 30% 감축으로' 발표하였다. 따라서 디스플레이 및 반도체 공정에는 GWP (Global warming Potential)에 적용 가능한 대체 가스의 연구가 필요한 상황이다. 온실가스인 $SF_6$를 대체하기 위한 방법으로 GWP가 낮은 $C_3F_6$가스를 이용하여 $Si_3N_4$를 Dry etching 방법인 RIE (Reactive Ion Etching)공정을 한 후 배출되는 가스를 측정하였다. 4인치 P-type 웨이퍼 위에 PECVD (Plasma Enhanced Chemical Vapor Deposition)장비를 이용하여 $Si_3N_4$를 200 nm 증착하였고, Photolithography공정을 통해 Patterning을 한 후 RIE공정을 수행하였다. RIE는 Power : 300 W, Flow rate : 30 sccm, Time : 15 min, Temperature : $15^{\circ}C$, Pressure : Open과 같은 조건으로 공정을 수행하였다. 그리고 SEM (Scanning Electron Microscope)장비를 이용하여 Etching된 단면을 관찰하여 단차를 확인하였다. 또한 Etching 전후 배출가스를 포집하여 GC-MS (Gas Chromatograph-Mass Spectrophotometry)를 측정 및 비교하였다. Etching 전의 경우에는 $N_2$, $O_2$ 등의 가스가 검출되었고, $C_3F_6$ 가스를 이용해 etching 한 후의 경우에는 $C_3F_6$ 계열의 가스가 검출되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.285-285
• /
• 2011

EUVL (Extreme Ultra Violet Lithography) is one of competitive lithographic technologies for sub-30nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance since the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.459-459
• /
• 2012

Recently, the discharge of global warming gases in dry etching process of TFT-LCD display industry is a serious issue because perfluorocarbon compound (PFC) gas causes global warming effects. PFCs including CF4, C2F6, C3F8, CHF3, NF3 and SF6 are widely used as etching and cleaning gases. In particular, the SF6 gas is chemically stable compounds. However, these gases have large global warming potential (GWP100 = 24,900) and lifetime (3,200). In this work, we chose C3F6O gas which has a very low GWP (GWP100 = <100) and lifetime (< 1) as a replacement gas. This study investigated the effects of the gas flow ratio of C3F6O/O2 and process pressure in dual-frequency capacitively coupled plasma (CCP) etcher on global warming effects. Also, we compared global warming effects of C3F6O gas with those of SF6 gas during dry etching of a patterned positive type photo-resist/silicon nitride/glass substrate. The etch rate measurements and emission of by-products were analyzed by scanning electron Microscopy (SEM; HITACI, S-3500H) and Fourier transform infrared spectroscopy (FT-IR; MIDAC, I2000), respectively. Calculation of MMTCE (million metric ton carbon equivalents) based on the emitted by-products were performed during etching by controlling various process parameters. The evaluation procedure and results will be discussed in detail.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.356-360
• /
• 2003

The purpose of this paper was to determine the quantity of selenium in milk by inductively coupled plasma optical emission spectrometry. The sample was digested in teflon vessel containing nitric-hydrogen peroxide acid mixture. After digestion, the sample is treated with additional hydrochloric acid. Total selenium was reduced with sodium borohydride and concentrated hydrochloric acid in a simplified hydride generation(HG) manifold. The optimum conditions of HG are 2 M for HCl, 1.5％ for NaBH$_4$, 1.2 mL/mim for sample flow. Recovery rates by the standard addition method were 88.0％ at 10 ppb and 92.2％ at 10 ppm. The relative standard deviations were 4.8 and 3.2％, respectively. This method showed a good accuracy and precision. And so it was highly suitable for determination of small quantity of selenium in milk.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.103-109
• /
• 2014

Highly efficient hydrogenated nanocrystalline silicon (nc-Si:H) thin-film solar cells were prepared on flexible stainless steel substrates using plasma-enhanced chemical vapor deposition. To enhance the performance of solar cells, material properties of back reflectors, n-doped seed layers and wide bandgap nc-SiC:H window layers were optimized. The light scattering efficiency of Ag back reflectors was improved by increasing the surface roughness of the films deposited at elevated substrate temperatures. Using the n-doped seed layers with high crystallinity, the initial crystal growth of intrinsic nc-Si:H absorber layers was improved, resulting in the elimination of the defect-dense amorphous regions at the n/i interfaces. The nc-SiC:H window layers with high bandgap over 2.2 eV were deposited under high hydrogen dilution conditions. The vertical current flow of the films was enhanced by the formation of Si nanocrystallites in the amorphous SiC:H matrix. Under optimized conditions, a high conversion efficiency of 9.13% ($V_{oc}=0.52$, $J_{sc}=25.45mA/cm^2$, FF = 0.69) was achieved for the flexible nc-Si:H thin-film solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.816-820
• /
• 2013

We investigated the characteristics of the silicon oxy-nitride and nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) at the low temperature with a varying $NH_3/N_2O$ mixing ratio and a fixed $SiH_4$ flow rate. The deposition temperature was held at $150^{\circ}C$ which was the temperature compatible with the plastic substrate. The composition and bonding structure of the nitride films were investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Nitrogen richness was confirmed with increasing optical band gap and increasing dielectric constant with the higher $NH_3$ fraction. The leakage current density of the nitride films with a high NH3 fraction decreased from $8{\times}10^{-9}$ to $9{\times}10^{-11}(A/cm^2$ at 1.5 MV/cm). This results showed that the films had improved electrical properties and could be acceptable as a gate insulator for thin film transistors by deposited with variable $NH_3/N_2O$ mixing ratio.