• 제목/요약/키워드: plasma application

검색결과 912건 처리시간 0.032초

투명 폴리카보네이트 보호코팅을 위한 산화알루미늄 박막 ($Al_2O_3$ coating on transparent polycarbonate substrates for the hard-coating application)

  • 김훈;남경희;장동수;이정중
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2007년도 춘계학술발표회 초록집
    • /
    • pp.51-54
    • /
    • 2007
  • 타겟 전압 제어를 통한 반응성 스퍼터링 방법과 유도결합 플라즈마(ICP: inductively coupled plasma)를 통해 산화알루미늄 박막을 증착하였다. 폴리카보네이트 기판과 산화알루미늄 박막사이의 접착력은 플라즈마 표면처리 하여 향상시켰다. 박막 특성은 ICP power 변화에 대한 경도, 구조, 밀도변화, 투과율, 증착속도, 표면 거칠기 및 잔류응력을 조사하여 보호코팅으로서 성능을 평가하였다.

  • PDF

Application of a Membrane Desolvator to the Analysis of Organic Solvents in Inductively Coupled Plasma Atomic Emission Spectrometry

  • Lee, J. S.;Lim, H. B.
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권9호
    • /
    • pp.1040-1044
    • /
    • 1999
  • A micro porous PTFE membrane desolvator (MMD) was built and evaluated for the on-line removal of organic solvents to facilitate the determination of trace metal contaminants in the solvents by ICP-AES. Three organic solvents, isopropyl alcohol (IPA), methanol, and dimethy sulfoxide (DMSO) were studied. The MMD reduced organic solvent concentration in the sample aerosol stream by 82% to 89%, as indicated by monitoring C(I) emission. Net signal intensity of Fe, Al, and Cu was increasing with higher organic solvent concentration, with the rate of increase being solvent dependent. The signal intensities for Mg and Pb followed the trend with the C(I) signal. Changing the sweep gas flow rate affected the optimum signal intensity. Wine samples were analyzed by the method of standard addition. The concentrations of B, Al, and Mg were determined with a relative precision of less than 2.3%.

Distribution of Rare Earth Elements and Their Applications as Tracers for Groundwater Geochemistry - A Review

  • Hwang, Heejin;Nyamgerel, Yalalt;Lee, Jeonghoon
    • 한국지구과학회지
    • /
    • 제42권4호
    • /
    • pp.383-389
    • /
    • 2021
  • Several studies investigating the behavior and environmental distribution of rare earth elements (REEs) have been reviewed to determine the geochemical processes that may affect their concentrations and fractionation patterns in groundwater and whether these elements can be used as tracers for groundwater-rock interactions and groundwater flow paths in small catchments. Inductively coupled plasma-mass spectrometry (ICP-MS), equipped with an ultrasonic nebulizer and active-film multiplier detector, is routinely used as an analytical technique to measure REEs in groundwater, facilitating the analysis of dissolved REE geochemistry. This review focuses on the distribution of REEs in groundwater and their application as tracers for groundwater geochemistry. Our review of existing literature suggests that REEs in ice cores can be used as effective tracers for atmospheric particles, aiding the identification of source regions.

Acyclic Vanilloid Receptor Antagonist Based on Capsazepine

  • Park, Hyeung-Geun;Park, Mi-Kyoung;Choi, Ji-Yeon;Choi, Se-Hoon;Lee, Ji-Hye;Suh, Young-Ger;Oh, Uh-Taek;Kim, Hee-Doo;Lee, Jee-Woo;Park, Young-Ho;Jeong, Yeon-Su;Choi, Jin-Kyu;Jew, Sang-Sup
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
    • /
    • pp.349.1-349.1
    • /
    • 2002
  • Capsaicin. the pungent component of chili pepper. opens a novel cation selective ion channel in the plasma membrane of peripheral sensory neurons. Capsaicin channel agonists induce pain upon topical application in the early stage. which is followed by a period of desensitization. Although the agonists have been studied as a analgesics, their initial irritancy became sever side effect. So competive antagonists have been pursued as a novel pharmacological agent for analgesics, rather than agonists. (omitted)

  • PDF

열확산에 의한 다이아몬드 박막의 표면연마에 관한 연구 (A Study on the Surface Polishing of Diamond Thin Films by Thermal Diffusion)

  • 배문기;김태규
    • 열처리공학회지
    • /
    • 제34권2호
    • /
    • pp.75-80
    • /
    • 2021
  • The crystal grains of polycrystalline diamond vary depending on deposition conditions and growth thickness. The diamond thin film deposited by the CVD method has a very rough growth surface. On average, the surface roughness of a diamond thin film deposited by CVD is in the range of 1-100 um. However, the high surface roughness of diamond is unsuitable for application in industrial applications, so the surface roughness must be lowered. As the surface roughness decreases, the scattering of incident light is reduced, the heat conduction is improved, the mechanical surface friction coefficient can be lowered, and the transmittance can also be improved. In addition, diamond-coated cutting tools have the advantage of enabling ultra-precise machining. In this study, the surface roughness of diamond was improved by thermal diffusion reaction between diamond carbon atoms and ferrous metals at high temperature for diamond thin films deposited by MPCVD.

Photothermoelastic interactions under Moore-Gibson-Thompson thermoelasticity

  • Kumar, Rajneesh;Sharma, Nidhi;Chopra, Supriya
    • Coupled systems mechanics
    • /
    • 제11권5호
    • /
    • pp.459-483
    • /
    • 2022
  • In the present work, a new photothermoelastic model based on Moore-Gibson-Thompson theory has been constructed. The governing equationsfor orthotropic photothermoelastic plate are simplified for two-dimension model. Laplace and Fourier transforms are employed after converting the system of equations into dimensionless form. The problem is examined due to various specified sources. Moving normal force, ramp type thermal source and carrier density periodic loading are taken to explore the application of the assumed model. Various field quantities like displacements, stresses, temperature distribution and carrier density distribution are obtained in the transformed domain. The problem is validated by numerical computation for a given material and numerical obtained results are depicted in form of graphs to show the impact of varioustheories of thermoelasticity along with impact of moving velocity, ramp type and periodic loading parameters. Some special cases are also explored. The results obtained in this paper can be used to design various semiconductor elements during the coupled thermal, plasma and elastic wave and otherfieldsin thematerialscience, physical engineering.

Enhancement of the nucleation density for diamond film on the pretreated glass substrate by the application of cyclic modulation of the source-gas flow rate

  • Kim, T.-G.;Kim, S.-H.;Kim, Y.-H.
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제4권1호
    • /
    • pp.18-22
    • /
    • 2000
  • For the enhancement of the nucleation density of the diamond film, we introduced the cyclic process. The cyclic process was carried out by the on/off control of CH$_4$ flow rate for a relatively short time (10 min), compared with the total reaction time (6 h). Prior to depositing the diamond film, we made the pretreated glass substrate via the unidirectional scratch using ∼l $\mu\textrm{m}$ size diamond powders. Diamond films were deposited on the pretreated glass substrate in a microwave plasma enhanced chemical vapor deposition (MPECVD) system. We observed the enhancement of the nucleation density of the diamond films caused by the cyclic process. Detailed surface morphologies of the substrate were investigated after the cyclic process. Based on these results, we discussed the cause for the enhancement of the nucleation density on the pretreated glass substrate by the cyclic process.

  • PDF

반도체공정을 위한 OES 데이터 기반 실시간 플라즈마 상태예측 모형 (Real-time plasma condition estimate model based on Optical Emission Spectroscopy (OES) datafor semiconductor processing)

  • 정희진;유진승
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2023년도 추계학술발표대회
    • /
    • pp.341-344
    • /
    • 2023
  • 건식 반도체 공정에서 저온플라즈마를 일정한 상태로 유지하는 것은 반도체 공정의 효율을 높이기 위해서 매우 중요한 문제이다. 그러나 저온플라즈마 반응로를 진공상태로 유지해야하기 때문에 플라즈마의 상태를 예측하는 작업은 매우 어렵다. 본 연구에서는 OES 센서에서 수집된 데이터를 이용하여 플라즈마의 상태를 예측하는 모형을 개발하였다. 질소가스를 이용한 플라즈마 반응로에서 15개의 서로 다른 플라즈마를 생성하여 OES 데이터를 수집하였고 15개 플라즈마의 상태를 분류할 수 있는 Gaussian Mixture Model(GMM)을 개발하였다. 총 7,296개 파장에서 측정된 분광강도(intensity)를 주성분분석(Pricipal Component Analysis)를 통해 2개의 주성분으로 차원 축소하여 GMM 모형을 개발하엿다. 모형의 정확도는 약 81.72%으로 플라즈마의 OES데이터에 대한 해석력은 뛰어났다.

Principles and Applications of Non-Thermal Technologies for Meat Decontamination

  • Yewon Lee;Yohan Yoon
    • 한국축산식품학회지
    • /
    • 제44권1호
    • /
    • pp.19-38
    • /
    • 2024
  • Meat contains high-value protein compounds that might degrade as a result of oxidation and microbial contamination. Additionally, various pathogenic and spoilage microorganisms can grow in meat. Moreover, contamination with pathogenic microorganisms above the infectious dose has caused foodborne illness outbreaks. To decrease the microbial population, traditional meat preservation methods such as thermal treatment and chemical disinfectants are used, but it may have limitations for the maintenance of meat quality or the consumers acceptance. Thus, non-thermal technologies (e.g., high-pressure processing, pulsed electric field, non-thermal plasma, pulsed light, supercritical carbon dioxide technology, ozone, irradiation, ultraviolet light, and ultrasound) have emerged to improve the shelf life and meat safety. Non-thermal technologies are becoming increasingly important because of their advantages in maintaining low temperature, meat nutrition, and short processing time. Especially, pulsed light and pulsed electric field treatment induce few sensory and physiological changes in high fat and protein meat products, making them suitable for the application. Many research results showed that these non-thermal technologies may keep meat fresh and maintain heat-sensitive elements in meat products.

유기전자소자 적용을 위한 저온 공정용 배리어 박막 연구 (Low-Temperature Processed Thin Film Barrier Films for Applications in Organic Electronics)

  • 김준모;안명찬;장영찬;배형우;이원호;이동구
    • 센서학회지
    • /
    • 제28권6호
    • /
    • pp.402-406
    • /
    • 2019
  • Recently, semiconducting organic materials have been spotlighted as next-generation electronic materials based on their tunable electrical and optical properties, low-cost process, and flexibility. However, typical organic semiconductor materials are vulnerable to moisture and oxygen. Therefore, an encapsulation layer is essential for application of electronic devices. In this study, SiNx thin films deposited at process temperatures below 150 ℃ by plasma-enhanced chemical vapor deposition (PECVD) were characterized for application as an encapsulation layer on organic devices. A single structured SiNx thin film was optimized as an organic light-emitting diode (OLED) encapsulation layer at process temperature of 80 ℃. The optimized SiNx film exhibited excellent water vapor transmission rate (WVTR) of less than 5 × 10-5 g/㎡·day and transmittance of over 87.3% on the visible region with thickness of 1 ㎛. Application of the SiNx thin film on the top-emitting OLED showed that the PECVD process did not degrade the electrical properties of the device, and the OLED with SiNx exhibited improved operating lifetime