• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.68-77
• /
• 2022

The human thermal environment in an apartment complex located in Seoul was quantitatively analyzed to devise methods to modify human heat-related stresses in landscape and urban planning. Microclimatic data (air temperature, relative humidity, wind speed, and short- and long-wave radiation) were collected at 6 locations [Apt-center, roof (cement), roof (grass), ground, playground, and a tree-lined road] in the late spring and summer, and the data were used to estimate the human thermal sensation, physiological equivalent temperature (PET) and universal thermal climate index (UTCI). As a result, the playground location had the highest thermal environment, and the roof (grass) location had the lowest. The mean difference between the two locations was 0.8-1.1℃ in air temperature, 1.8-4.0% in relative humidity, and 7.5-8.0℃ in mean radiant temperature. In open space locations, the wind speed was 0.4-0.5 ms-1 higher than others. Also, a wind tunnel effect happened at the Apt-center location during the afternoon. For the human thermal sensation, PET and UTCI, the mean differences between the playground and roof (grass) locations were: 5.2℃ (Max. 11.7℃) in late spring and 5.4℃ (Max. 18.1℃) in summer in PET; and 3.0℃ (Max. 6.1℃) in late spring and 2.6℃ (Max. 9.8℃) in summer in UTCI. The mean differences indicated a level change in PET and 1/2 level in UTCI, and the maximum differences showed greater changes, 2-3 levels in PET, and 1-1.5 levels in UTCI. Moreover, the roof (grass) location gave 4.6℃ PET reduction and a 2.5℃ UTCI reduction in late spring, and a 4.4℃ PET reduction and a 2.0℃ UTCI reduction in the summer when compared with the roof (cement) location, which results in a 2/3 level change in PET and a 1/3 level in UTCI. Green infrastructure locations [roof (grass), ground, and a tree-lined road] were not statistically significant in the reduction of PET and UTCI in thermal environment modifying effects. The implementation of green infrastructure, such as rooftop gardens, grass pavement, and street tree planting, should be adopted in landscape planning and be employed for human thermal environment modification.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.3
• /
• pp.19-34
• /
• 2022

This study was conducted to provide basic data that can be used when establishing Net Zero policies and implementation plans for non-urban settlements by quantitatively analyzing the Net Zero contribution to green infrastructure in rural areas corresponding to non-urban settlements. The main purpose is to first, systematize green infrastructure in rural areas, secondly derive basic units for each element of green infrastructure, and thirdly quantify and present the impact on Net Zero in Korea using these. In this study, CVR(Content Validity Ration) analysis was performed to verify the adequacy of green infrastructure elements in rural areas derived through research and analysis of previous studies, is as follows. First, Hubs of Green infrastructure in rural area include village forests, wetlands, farm land, and smart farms with a CVR value of .500 or higher. And Links of Green infrastructure in rural area include streams, village green areas, and LID (rainwater recycling). Second, the basic unit for each green infrastructure element was presented by classifying it into minimum, maximum, and median values using the results of previous studies so that it could be used for spatial planning and design for Net Zero. Third, when Green infrastructure in rural areas is applied to non-urban settlements in Korea, it is analyzed that it has the effect of indirectly reducing CO₂ by at least 70.76 million tons and up to 141.16 million tons. This is 3.4 to 6.7 times the amount of CO₂ emission from the agricultural sector in 2019, and it can be seen that the contribution to Net Zero is very high. It is expected to greatly contribute to the transformation of the ecosystem. This study quantitatively presented the carbon-neutral contribution to settlements located in non-urban areas, and by deriving the carbon reduction unit for each element of green infrastructure in rural areas, it can be used in spatial planning and design for carbon-neutral at the village level. It has significance as a basic research. In particular, the basic unit of carbon reduction for each green infrastructure factors will be usable for Net Zero policy at the village level, presenting a quantitative target when establishing a plan, and checking whether or not it has been achieved. In addition, based on this, it will be possible to expand and apply Net Zero at regional and city units such as cities, counties, and districts.

• Journal of The Korean Association For Science Education
• /
• v.43 no.1
• /
• pp.1-15
• /
• 2023

As the social and economic value of living modified organisms (LMOs) increase, so do the potential risks they pose to humans and the environment. Therefore, all laboratories using LMOs must establish an LMO laboratory in accordance with the standards required by regulations. Recently, in high school, LMO-related experimental programs have been developed for their educational effects. Also, in this case, it is necessary to comply with the regulation for LMO laboratories. However, high schools are still unfamiliar with the LMO laboratory, and it is difficult for teachers to manage an LMO laboratory because its implementation applies the same standards to general research institutes. In this study, we used causal chain analysis to discover the difficulties each teacher faced while setting up an LMO laboratory by examining three cases. The difficulties experienced by teachers are as follows: the first problem is "reluctance to set up an LMO laboratory," because of "administrative tasks for laboratory registration" and "difficulty in persuading colleagues." The second problem is a difficulty for teachers to operate LMO laboratory in blind spots, due to "inflexible installation and closure," "medical waste disposal," and "LMO education that does not fit the school context." Through this study, although the difficulty of running an LMO laboratory is caused by a lack of necessity and insufficient consideration of the school context, the more fundamental cause was a lack of collaborative planning between the educational field and the operating institutions. The teachers who participate in this research suggest that "using shared LAB" and "preparing opportunities for knowledge sharing" can be considered as strategies for operating the school's LMO laboratory. We feel that this study will provide a useful reference for teachers or schools planning to build an LMO laboratory.

• Journal of Distribution Science
• /
• v.7 no.3
• /
• pp.71-100
• /
• 2009

The main purpose of this study is to define relevant factors that influence successful start-ups and management innovations of traditional markets from the point of market structures and relations. To do this, we devide an entrepreneurship of merchant into two factors, risk taking and managerial experience and choose product planning and its implementation to see merchandising of traditional markets. In this study we identify that several factors we chose are contributing to generating management performances through market promotional parameters. Also we confirm that image factors of traditional markets is consist of awareness and value of markets, and that these factors shows some sequential and continual patterns in the course of generating performances. In additions, it is identified that four independent factors have positive effects to star-up success; risk taking 0.29(t 2.61), managerial experience 0.04(t 1.79), merchandising implementation 0.374(t 2.61), market value 0.47(t 5.25), market awareness 0.22(t 2.30). This study can help merchants of traditional markets to make and change their market strategies, restructure their businesses and survive in the field. This also provide some ideas and guidances to relevant government agencies in formulating traditional market policies.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.99-143
• /
• 2016

General aviation and air transport are two wings of the civil aviation industry. Chinese air transport is developing rapidly, and has become the world second air transport system only second to US since 2005. However, Chinese civil aviation is far behind the world average level, and cannot meet requirements of economic construction and social development. The transition and structural adjustment of Chinese economy provide the general aviation with a unprecedented broad market. The prospect of general aviation is promising and anticipated. The development of general aviation industry needs the legislative supports, and the current legislative conditions of Chinese general aviation are undoubtedly far behind the realistic requirements. Accelerating the legislation in Chinese general aviation industry requires scientific legislation concept. First, Legislation must promote development of general aviation industry. The general aviation will serves as a Chinese emerging industry that boosts domestic demand, promotes employment and expedite domestic economic development. We should, based on both the concept of promoting the industrial development of general aviation and national industrial planning, enact and rectify relative laws and regulations. And we should also straighten out the relationship between aviation security and industrial development and promote the revolution of low-altitude airspace management in an all-round way, in order to improve the utilization rate of airspace resources, classify and establish airspace, simplify examination and approval procedure and intensify operation management. In addition, what we should do is to expedite the infrastructure layout construction, guide the differentiated but coordinated development of general aviation industries in various areas, establish a united supervision mechanism of general aviation, redistrict the responsibilities of Chinese Air Control Agency and set up legislation, law enforcement and judicial systems with clarified institutions, clear positioning and classified responsibilities, so as to usher in a new era of the legislative management of Chinese general aviation industry. Second, shift the focus from regulations to both regulations and services. Considering the particularity of the general aviation, we should use American practices for reference and take into account both regulation and service functions when enacting general aviation laws. For example, we should reduce administrative licensing and market supervision, and adopt "criteria" and "approval" management systems for non-commercial and commercial aviation. Furthermore, pay attention to social benefits. Complete social rescuing mechanism through legislation. It should be clarified in legislation that general aviation operators should take the responsibilities of, and ensure to realize social benefits of environmental protection and ecological balance .Finally, rise in line with international standards. Modify Chinese regulations which is inconsistent with international ones to remove barriers to international cooperation. Specify basic legislative principles. One is the principle of coordination. Realize coordination between the civil aviation and general aviation, between military aviation and civil aviation, and among departments. Two is the principle of pertinence. The general aviation has its own rules and specialties, needing to be standardized using specialized laws and regulations. Three is the principle of efficiency. To realize time and space values of general aviation, we should complete rules in aerospace openness, general aviation airport construction, general aviation operations, and regulation enforcement. Four is the principle of security. Balance the maximum use of resources of Chinese airspace and the according potential threats to Chinese national interests and social security, and establish a complete insurance system which functions as security defense and indemnificatory measure. Establish a unified legal system. Currently, the system of Chinese general aviation laws consists of national legislation, administrative laws and regulations and civil aviation regulations (CAR). Some problems exist in three components of the system, including too general content, unclear guarantee measures, incomplete implementation details, and lacking corresponding pertinence and flexibility required by general aviation regulations, stringency of operation management and standards, and uniformity of standards. A law and regulation system, centered on laws and consisting of administrative laws regulations, industrial regulations, implementation details, industrial policies and local laws and regulations, should be established. It is suggested to modify the Civil Aviation Law to make general aviation laws complete, enact the Regulations of General Aviation Development, and accelerate the establishment, modification and abolition of Chinese general aviation laws to intensify the coordination and uniformity of regulations.

• Journal of Hospice and Palliative Care
• /
• v.22 no.4
• /
• pp.198-206
• /
• 2019

Purpose: The Act on Hospice and Palliative Care and Decisions on Life-sustaining Treatment for Patients at the End of Life was enacted in 2016 and has taken effect since 2018 February. The content of this act was based on Physician Orders for Life-Sustaining Treatment (POLST) in the United States and we modified it for terminal cancer patients registering hospice. The object of this study is to investigate preference and implementation rate for modified Korean POLST (MMK-POLST) items in hospice ward. Methods: From February 1, 2017 to April 30, 2019, medical records regarding MMK-POLST were retrospectively analyzed for all patients hospitalized in the hospice ward of Gyeongsang National University Hospital. Results: Of the eligible 387 total cohorts, 295 patients filled out MK-POLST. MK-POLST has been completed in 133 cases (44.1%) by the patient themselves, 84 cases (28.5%) by the spouse, and 75 cases (25.4%) by their children, respectively. While only 13 (4.4%) out of 295 MK-POLST completed patients refused the parenteral nutrition and 5 patients (1.7%) for palliative sedation, the absolute majority of 288 (97.6%) patients did not want cardiopulmonary resuscitation (CPR) and ventilators and 226 people (76.9%) for pressor medications. Kappa values for the matched strength of MK-POLST implementation were poor for all items except CPR, ventilators and palliative sedation. Conclusion: Hospice patients refused to conduct cardiopulmonary resuscitation, ventilators and pressor agents. In contrast, antibiotics, parenteral nutrition and palliative sedation were favored in the majority of patients.

• Journal of Arbitration Studies
• /
• v.28 no.2
• /
• pp.3-43
• /
• 2018

The emergence of a multi-door courthouse is related with a couple of reasons as follows: First, a multi-door courthouse was originally initiated by the United States government that increasingly became impatient with the pace and cost of protracted litigation clogging the courts. Second, dockets of courts are overcrowded with legal suits, making it difficult for judges to handle those legal suits in time and causing delays in responding to citizens' complaints. Third, litigation is not suitable for the disputant that has an ongoing relationship with the other party. In this case, even if winning is achieved in the short run, it may not be all that was hoped for in the long run. Fourth, international organizations such as the World Bank, UNDP, and Asia Development Bank urge to provide an increased access to women, residents, and the poor in local communities. The generic model of a multi-door courthouse consists of three stages: The first stage includes a center offering intake services, along with an array of dispute resolution services under one roof. At the second stage, the screening unit at the center would diagnose citizen disputes, then refer the disputants to the appropriate door for handling the case. At the third stage, the multi-door courthouse provides diverse kinds of dispute resolution programs such as mediation, arbitration, mediation-arbitration (med-arb), litigation, and early neutral evaluation. This study suggests the extended model of multi-door courthouse comprised of five layers: intake process, diagnosis and door-selection process, neutral-selection process, implementation process of dispute resolution, and process of training and education. One of the major characteristics of extended multi-door courthouse model is the detailed specification of individual department corresponding to each process within a multi-door courthouse. The intake department takes care of the intake process. The screening department plays the role of screening disputes, diagnosing the nature of disputes, and determining a suitable door to handle disputes. The human resources department manages experts through the construction and management of the data base of mediators, arbitrators, and judges. The administration bureau manages the implementation of each process of dispute resolution. The education and training department builds long-term planning to procure neutrals and experts dealing with various kinds of disputes within a multi-door courthouse. For this purpose, it is necessary to establish networks among courts, law schools, and associations of scholars in order to facilitate the supply of manpower in ADR neutrals, as well as judges in the long run. This study also provides six case studies of multi-door courthouses across continents in order to grasp the worldwide picture and wide spread phenomena of multi-door courthouse. For this purpose, the United States and Latin American countries including Argentina and Brazil, Middle Eastern countries, and Southeast Asian countries (such as Malaysia and Myanmar), Australia, and Nigeria were chosen. It was found that three kinds of patterns are discernible during the evolution of a multi-door courthouse model. First, the federal courts of the United States, land and environment court in Australia, and Lagos multi-door courthouse in Nigeria may maintain the prototype of a multi-door courthouse model. Second, the judicial systems in Latin American countries tend to show heterogenous patterns in terms of the adaptation of a multi-door courthouse model to their own environments. Some court systems of Latin American countries including those of Argentina and Brazil resemble the generic model of a multi-door courthouse, while other countries show their distinctive pattern of judicial system and ADR systems. Third, it was found that legal pluralism is prevalent in Middle Eastern countries and Southeast Asian countries. For example, Middle Eastern countries such as Saudi Arabia have developed various kinds of dispute resolution methods, such as sulh (mediation), tahkim (arbitration), and med-arb for many centuries, since they have been situated at the state of tribe or clan instead of nation. Accordingly, they have no unified code within the territory. In case of Southeast Asian countries such as Myanmar and Malaysia, they have preserved a strong tradition of customary laws such as Dhammthat in Burma, and Shriah and the Islamic law in Malaysia for a long time. On the other hand, they incorporated a common law system into a secular judicial system in Myanmar and Malaysia during the colonial period. Finally, this article proposes a couple of factors to strengthen or weaken a multi-door courthouse model. The first factor to strengthen a multi-door courthouse model is the maintenance of flexibility and core value of alternative dispute resolution. We also find that fund raising is important to build and maintain the multi-door courthouse model, reflecting the fact that there has been a competition surrounding the allocation of funds within the judicial system.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.64-71
• /
• 2016

We develop a manufacture procedure for the production of a patient specific customized bolus (PSCB) using a 3D printer (3DP). The dosimetric accuracy of the 3D-PSCB is evaluated for electron beam therapy. In order to cover the required planning target volume (PTV), we select the proper electron beam energy and the field size through initial dose calculation using a treatment planning system. The PSCB is delineated based on the initial dose distribution. The dose calculation is repeated after applying the PSCB. We iteratively fine-tune the PSCB shape until the plan quality is sufficient to meet the required clinical criteria. Then the contour data of the PSCB is transferred to an in-house conversion software through the DICOMRT protocol. This contour data is converted into the 3DP data format, STereoLithography data format and then printed using a 3DP. Two virtual patients, having concave and convex shapes, were generated with a virtual PTV and an organ at risk (OAR). Then, two corresponding electron treatment plans with and without a PSCB were generated to evaluate the dosimetric effect of the PSCB. The dosimetric characteristics and dose volume histograms for the PTV and OAR are compared in both plans. Film dosimetry is performed to verify the dosimetric accuracy of the 3D-PSCB. The calculated planar dose distribution is compared to that measured using film dosimetry taken from the beam central axis. We compare the percent depth dose curve and gamma analysis (the dose difference is 3%, and the distance to agreement is 3 mm) results. No significant difference in the PTV dose is observed in the plan with the PSCB compared to that without the PSCB. The maximum, minimum, and mean doses of the OAR in the plan with the PSCB were significantly reduced by 9.7%, 36.6%, and 28.3%, respectively, compared to those in the plan without the PSCB. By applying the PSCB, the OAR volumes receiving 90% and 80% of the prescribed dose were reduced from $14.40cm^3$ to $0.1cm^3$ and from $42.6cm^3$ to $3.7cm^3$, respectively, in comparison to that without using the PSCB. The gamma pass rates of the concave and convex plans were 95% and 98%, respectively. A new procedure of the fabrication of a PSCB is developed using a 3DP. We confirm the usefulness and dosimetric accuracy of the 3D-PSCB for the clinical use. Thus, rapidly advancing 3DP technology is able to ease and expand clinical implementation of the PSCB.

• Progress in Medical Physics
• /
• v.22 no.4
• /
• pp.190-197
• /
• 2011

Currently, the dose distribution calculation used by commercial treatment planning systems (TPSs) for high-dose rate (HDR) brachytherapy is derived from point and line source approximation method recommended by AAPM Task Group 43 (TG-43). However, the study of Monte Carlo (MC) simulation is required in order to assess the accuracy of dose calculation around three-dimensional Ir-192 source. In this study, geometry factor was calculated using segmented sources integration method by dividing microSelectron HDR Ir-192 source into smaller parts. The Monte Carlo code (MCNPX 2.5.0) was used to calculate the dose rate $\dot{D}(r,\theta)$ at a point ($r,\theta$) away from a HDR Ir-192 source in spherical water phantom with 30 cm diameter. Finally, anisotropy function and radial dose function were calculated from obtained results. The obtained geometry factor was compared with that calculated from line source approximation. Similarly, obtained anisotropy function and radial dose function were compared with those derived from MCPT results by Williamson. The geometry factor calculated from segmented sources integration method and line source approximation was within 0.2% for $r{\geq}0.5$ cm and 1.33% for r=0.1 cm, respectively. The relative-root mean square error (R-RMSE) of anisotropy function obtained by this study and Williamson was 2.33% for r=0.25 cm and within 1% for r>0.5 cm, respectively. The R-RMSE of radial dose function was 0.46% at radial distance from 0.1 to 14.0 cm. The geometry factor acquired from segmented sources integration method and line source approximation was in good agreement for $r{\geq}0.1$ cm. However, application of segmented sources integration method seems to be valid, since this method using three-dimensional Ir-192 source provides more realistic geometry factor. The anisotropy function and radial dose function estimated from MCNPX in this study and MCPT by Williamson are in good agreement within uncertainty of Monte Carlo codes except at radial distance of r=0.25 cm. It is expected that Monte Carlo code used in this study could be applied to other sources utilized for brachytherapy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.52-62
• /
• 2016

Smart City is urban development for complex problem solving that provides convenience and safety for citizens, and it is a blueprint for future cities. In 2008, the Korean government defined the construction, management, and government support of U-Cities in the legislation, Act on the Construction, Etc. of Ubiquitous Cities (Ubiquitous City Act), which included definitions of terms used in the act. In addition, the Minister of Land, Infrastructure and Transport has established a "ubiquitous city master plan" considering this legislation. The concept of U-Cities is complex, due to the mix of informatization and urban planning. Because of this complexity, the foundation of relevant regulations is inadequate, which is impeding the establishment and implementation of practical plans. Smart City intelligent service facilities are not easy to define and classify, because technology is rapidly changing and includes various devices for gathering and expressing information. The purpose of this study is to complement the legal definition of the intelligent service facility, which is necessary for integrated management and operation. The related laws and regulations on U-City were analyzed using text-mining techniques to identify insufficient legal definitions of intelligent service facilities. Using data gathered from interviews with officials responsible for constructing U-Cities, this study identified problems generated by implementing intelligent service facilities at the field level. This strategy should contribute to improved efficiency management, the foundation for building integrated utilization between departments. Efficiencies include providing a clear concept for establishing five-year renewable plans for U-Cities.