• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.29-38
• /
• 2014

Allometric equations for leaf, branch, stem and total above ground biomass of Pinus koraeinsis trees were developed with diameter at breast height(DBH) of trees, which were growing in a pine plantation with the stand density of 410 tree $ha^{-1}$ and the average DBH of $29.1{\pm}5.2$ cm in Mt. Taewha, Gyeonggi. Damage by Acantholyda parki reduced leaf biomass compared to other studies, however, its contribution to total biomass was minimal among parts. Comprehensive analysis revealed that constant in allometric equation for total above ground biomass (logY=a + blogX) was affected by average DBH and stand density, however, constant b was not. At the stand level, biomass for leaf, brach, stem, total above ground biomass were 6.68 Mg $ha^{-1}$, 18.82 Mg $ha^{-1}$, 101.02 Mg $ha^{-1}$, 126.53 Mg $ha^{-1}$, respectively. We developed a Korean pine stand biomass regression, which explained about 98% of variation with DBH and stand density based on comprehensive analysis.

• Journal of Korean Society of Forest Science
• /
• v.28 no.1
• /
• pp.97-100
• /
• 1975

Korean white pine (Pinus koraiensis Sieb. & Zucc.), native to Korea and currently the most important timber species in Korea is being threatened by a blister rust discase caused by a Cronartium species. The fungus has been tentatively identified as Cronartium ribicola Fischer. The fungus alternates between P. koraiensis and Pedicularis resupinata L. (a herbaceous perennial) under natural conditions in Korea although experimentally it has been shown to infect several Ribes species. The taxonomic diagnosis of the causal fungus is not fully resolved. A review of the status of this rust disease on P. koraiensis and other possible hosts in Korea and its potential international significance along with present work underway in Korea is discussed.

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.101-108
• /
• 2012

In 2006, pinewood nematode, Bursaphelenchus xylophilus, was isolated from about 50 years old trees of Pinus densiflora and P. koraiensis showing leaf-wilt and -drying symptoms in Gwangju, Gyeonggi-do and Chuncheon, Gangwon-do. Isolation of pinewood nematodes from sapwood of infected pine trees showed no difference in population density between tree species and among the sampling heights on the main stem. Migration of pinewood nematodes in the host tree were investigated by inoculation of red pine (P. densiflora, 3 years old) seedlings with B. xylophilus. The nematodes seemed to move in red pine seedlings prior to multiplication and it might have taken about 20 days to start multiplication and expression of symptoms including wilt and dieback. In initial time after inoculation, nematodes started migration through the cortical resin canal from inoculated site and further showed upward and downward movements. More nematodes were observed in cortical resin canal during early period of inoculation and later in resin canal of xylem and tracheid also while, the pith still remained free from nematode. The density of B. xylophilus was higher in seedlings of low-vigor with poor root growth than in seedlings of normal root growth. Seedlings showing high density of B. xylophilus exhibited stem discoloration and secondary infection by fungus at the inoculation site.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.285-291
• /
• 2023

In this paper, in order to secure the safety and productivity of pine cone harvest, modeling and structural analysis of the hammering system for pine cone harvest drone that can easily access pine cone of Pinus koraiensis and collide with them to harvest them was performed. It calculate the equivalent stress for the structure of the hammering system and the yield strength of the applied material by applying the shear force of the stalk at which the pine cone is separated from the branch, and it is to verify the safety of the structure and propose an optimal design through appropriate factor of safety and design change. The shear force of the stalk at which the pine cone was separated from the branch was 468 N, and was applied to both ends of the hammering system. The yield strength of SS400 steel used in the hammering system is 245 ㎫, and the design change and structural analysis were performed so that the Von Mises stress could be less than 122.5 ㎫ by applying the factor of safety of 2.0 or more. As a result of the structural analysis of the frist modeling, the Von Mises stress was 220.3 ㎫, the factor of safety was 1.12, and the stress was concentrated in the screw fastening holes. As a result of the design change of the screw fastening holes, the Von Mises stress was 169.4 ㎫, the factor of safety was 1.45, and the stress was concentrated on the side part. As a result of the design change by changing screw fastening holes and adding ribs, the Von Mises stress was 121.6 ㎫, and the factor of safety was 2.02. The safety of the hammering system was secured with an optimal design with little change in mass. There was no deformation or damage as a result of experimenting on pine cone harvest by manufacturing the hammering system with an optimal design.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.30-37
• /
• 2013

The objective of this research was to understand herbicidal activity of essential oils isolated from leaves of pine (Pinus densiflora), nut pine (Pinus koraiensis), larch (Larix kaempferi) and khingan fir (Abies nephrolepsis) in Korea. In a seed bioassay, essential oils of nut pine, larch and khingan fir inhibited the growth of rapeseed (Brassica napus) seedlings by 50% at 4,766, 1,865, $5,934{\mu}g\;ml^{-1}$, respectively, however, that of pine did not show any herbicidal effect. In a green house experiment, fall panicum, Southern crabgrass, sorghum, barnyardgrass, quackgrass, black nightshade, Indian jointvetch, velvet leaf, and Japanese morningglory were controlled in 24 hours by the foliar application of 10% essential oils from pine, nut pine, larch and khingan fir. The treated plant parts showed burndown effect, however, new shoots appeared 3 days after treatment. Results of GC-MS analysis showed that essential oils from pine, nut pine, larch and khingan fir contained 16, 25, 25, and 16 compounds, respectively, with hydrocarbons, alcohols, ketones, and esters. The major compounds of the essential oils were 3-carene, bornyl acetate, camphene, limonene, ${\alpha}$-pinene, ${\beta}$-pinene and ${\beta}$-phellandrene.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.733-739
• /
• 2009

This study was carried out to analyze the relationship between major climatic factors (monthly temperature, precipitation) and radial growth of Korean Pine (Pinus koraiensis) in Inje-gun(Mt. Seorak), Sanchung-gun and Namwon-si(Mt. Jiri). Radial growth measurements were crossdated and correlated with climate variables. The climatic factors used were monthly mean temperature and monthly precipitation from August of previous year to September of the current year. In Inje-gun, radial growth was negatively correlated with monthly mean temperature in April, May, June, and August of the current year and was positively correlated with precipitation in August, October of the previous year and in April, August of the current year. Sanchung-gun showed a negative correlation with monthly mean temperature in September of the previous year and August of the current year but positive correlation in January of the current year. In contrast, precipitation in September of the previous year and August of the current year showed a positive influence. The results suggest that high temperature together with low precipitation may thus cause water stress and thereby limit radial growth in this region. In Namwon-si, the climategrowth relationships show that radial growth was negatively correlated with monthly mean temperature in August, October of the previous year and June of the current year. But August of the previous year and May, August of the current year in precipitation was positively correlated with radial growth. In the study areas, precipitation plays an important role for the radial growth of Kroean Pine (Pinus koraiensis). The results suggest that precipitation is important in the radial growth because water deficit in trees would take place in response to high temperature in the study area. Also there was some differences with study areas in the effects of both climatic variables probably as a result of different stand structure and geographical conditions and micro-climate.

• The Plant Pathology Journal
• /
• v.24 no.2
• /
• pp.159-163
• /
• 2008

Accurate identification of pine wood nematode, Bursaphelenchus xylophilus is a prerequisite to diagnose the pine wilt disease. However, a fungivorous nematode, B. mucronatus is highly similar to B. xylophilus and it is difficult to differentiate these two species by morphological features. A molecular diagnosis method, ITSRFLP was applied for the identification of B. xylophilus and B. mucronatus from Korea. Genomic DNA was extracted from a single individual nematode and ITS DNA was amplified by PCR. The size of PCR product was approximately 900bp and the sequence data were obtained after cloning. Amplified ITS was digested by 5 different restriction enzymes (Rsa I, Hae III, Msp I, Hinf I, and Alu I) and provided a discriminatory profile for B. xylophilus and B. mucronatus. Besides, B. mucro- natus was determined to have 2 different genotypes, East Asian type and European type also clearly separated by Rsa I and Hae III digestion. European type of B. mucronatus is recently collected from Pinus koraiensis and has not been reported before. ITS sequnce data were analyzed by Restriction Mapper program and the result supported ITS-RFLP pattern. These data indicated that PCRRFLP method is an accurate and simple way for identification of Bursaphelenchus species.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.49-55
• /
• 2008

This study was carried to investigate the effects of steaming and four different drying methods on the longitudinal liquid permeability of Korean pine (Pinus koraiensis Sieb.et Zucc.) board. Four drying methods were air drying, conventional kiln drying, microwave-vacuum drying and high temperature drying. Darcy equation was used for calculating the specific permeability of the small sapwood specimens taken from the treated boards while capillary rising method was used for the heartwood specimens. The sapwood specimens were extracted with water and benzene-alcohol solution to examine the mechanism of liquid flow in treated wood. No significant correlation was found between specific permeability and the number of resin canals of the sapwood specimens. Extraction decreased the differences of specific permeabilities of the sapwood specimens between the five treatment methods. The effects of extraction on the longitudinal permeability are different between five treatments. The fluid path in heartwood was observed by dynamic observation method.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.134-142
• /
• 1997

Pectin and tannin analysis were carried out to inverstigate any available components from Pinus densiflora, P. koraiensis, P. thunbergii and P. rigida. To analyze terpenoid components, the essential oils were extracted with steam distillation method from four kinds of pine needles. The essential oil was analyzed by GC and GC-MS spectroscopy. The results were summarized as follows: Pectin content was highest in P. koraiensis with 0.40%, and tannin content was highest in P. koraiensis with 1.05. Major components of P. densiflora needles were ${\alpha}$-pinene, ${\beta}$-caryophyllene, ${\Delta}^3$-carene and phytol. ${\alpha}$-Pinene, ${\Delta}^3$-carene, ${\beta}$-caryophyllene, germacrene D, and camphene were found major components in P. koraiensis. Major components of P. thunbergii needles were ${\beta}$-pinene, ${\alpha}$-pinene, ${\beta}$-caryophyllene and germacrene D. ${\beta}$-Pinene, ${\alpha}$-piene, humulene oxide and ${\alpha}$-elemene were major components in P. rigida. Sabinene and citronellol were infrequent components in P. koraiensis, and ${\alpha}$-pinene oxide was present only in P. rigida. ${\alpha}$-Pinene, limonene, and bornylacetate well known as the main components of green air bath were found in P. densiflora and P. koraiensis.