• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.353-361
• /
• 1977

In this paper we propose a new theory of multilayer physical adsorption based on the view that a second or higher layer molecule will be adsorbed above the center of a square or triangular array of molecules, rather than on top of molecules themselves, in the next lower layer and the corresponding adsorption isotherm is derived. The derived isotherm contains three adjustable parameters; $v_m$ (monolayer capacity), q/$q_1$ (ratio of the molecular partition function for the second or higher layer vs. that for the first layer) and n (a parameter characterizing the piling pattern of adsorbed molecules). When applied to adsorption of argon on "Carbolac" carbon and nitrogen on Linde silica, excellent agreements between observed and calculated values are obtained up to p/$p_0$ = 0.8. In both cases n = 3 gives the best fit and this probably indicates that adsorbed molecules are piled up in a closest packing pattern.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.197-207
• /
• 2018

SMEs manufacturing Factory, which are small-scale production systems of various types, mass-produce and sell products in order to meet customer needs. This means that the company has an excessive amount of material supply to reduce the loss due to lack of inventory and high inventory maintenance cost. And the products that fail to respond to the demand are piled up in the management warehouse, which is the reality that the storage cost is incurred. To overcome this problem, this paper uses ARIMA model, a time series analysis technique, to predict demand in terms of seasonal factors. In this way, demand forecasting model based on economic order quantity model was developed to prevent stock shortage risk. Simulation is carried out to evaluate the effectiveness of the development model and to demonstrate the effectiveness of the development model as applied to SMEs in the future.

• Journal of architectural history
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2008

In this study, I attempted to the architectural design characteristics of Daeung-Jeon in Sudeok Temple. For this purpose, After I set up several assumptions in the basis of the general characteristics of Korean wood architecture, and then, analyzed floor plan, structural formation and section sizes of structure and bracket members in relation to module and unit. As the results, the characteristics of the design process of plan and structure are follows. (1) 1 ja(尺), the unit applied to this building is measured $307.6{\sim}318.3mm$) and the average is 312.9mm (2) It is estimated that the floor plan designed on the basis of the top of columns. By the applied unit, every bay of the front side and the side is each designed by 15 ja and 8.5 ja. (3) The section is composed of piled members which have same section size. As basic module of section size called 'jae(재;材)', it is estimated at width 0.45 ja by height 0.75 ja. And as the secondary module, height between jae and is called 'gyoe(계;)' and it wes designed by three height size of 0.25 ja, 0.27 ja and 0.30 ja, (4) It is estimated that the section plan was designed by the order as follows. Firstly, the horizontal position of purlins wes decided on the basis of the intersection point of long and short rafters, and then the position and the section size of purlins and jangheyo(長舌) wes decided on the basis of the slope of roof and rafters. Secondly, going down from purlins, the members of structure composed of 'jae' and 'gyoe' was repeated. Lastly, for the purpose of linking the structure members located on the center line of adjacent purlins organically, the height of whaban(화반) was controlled.

• Journal of the Korean Society of Costume
• /
• v.58 no.5
• /
• pp.13-34
• /
• 2008

In Headgear and Ornaments for Diadem in the Period of the Three States there was Conical Cap(or Pointed Cap), Feathered Cap(Trim), and Crown[Tree-typed Diadem and Tree and Antler-typed Diadem] was excavated from the tombs. Feathered Trim is 5 types, Feathered Trim I-A, Feathered Trim I-B, Feathered Trim II-A, Feathered Trim II-B, Feathered Trim II-C in according to upper part of central insert plate style. Feathered Trim I-A, I-B, II-B type was general style that was found in most of the old tombs in ancient Silla, Gaya. Feathered Trim II-A type was excavated from the only Silla tombs and II-C type was excavated from Gaya tombs. The Ornaments for Diadem in Baekje was excavated from the tombs is adorned with a arranged leaf-stems on either sides and the flower-shaped. They were distinguished with the original mode of Goguryeo and ancient Silla at the time. Tree-typed Diadem is five part in according to the Mountain(;山)-typed piled up. Only one Mountain(;山)-typed one in three stand-up ornament(I-1 type), and three step one in three stand-up one(I-2 type), modification one (I-3 type), three step one of four and five stand-up ones(I-4 type), and four step one of four and five stand-up ones (I-5 type). Tree and Antler-typed Diadem is three part in according to the step of Mountain(; 山)-typed and cross-shaped of the upper part. Three one of three step one of Mountain(;山)-typed and two Antler- typed (II-1 type), cross-shaped one(II-2 type), four step one(II-3 type).

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.503-509
• /
• 2010

Remarshaling is referred to a preparatory task of rearranging containers piled up in a stacking yard to improve the efficiency of loading. Selective remarshaling is required because the time for remarshaling known as large time-consuming task is not enough to remarshal all containers. In this research, we compare two previous researches in more objectively way: heuristic and genetic algorithm based approaches. In addition, we prove the effect of iterative reselection method on dwindling the gap between plan and execution due to the uncertainty of crane operation during execution. Simulation experiments under realistic uncertainty model show that heuristic approaches which have few computational complexity can cope with the uncertainty well when reselection interval is short, but genetic algorithm based approach has advantages when reselection interval that can ensure appropriate number of evolutions is given because of computational complexity for search.

• Current Photovoltaic Research
• /
• v.4 no.4
• /
• pp.159-163
• /
• 2016

Piled snow upon PV module interferes with Photoelectric Effect process through photovoltaic directly. As a result of this phenomenon, its generation efficiencies keep decreasing or are stuck at zero power generating status. In addition, PV facilities have been installed on those places such as water surface, roof-top, and other isolated places, dealing with conditions of "Securing high REC weighted value", "Difficulty of securing land" and so forth. Through this study, we are able to actualize the function of heating over PV modules when it snows. We adopted laminating method through heating film and modules, guaranteeing warranty more than for 25 years. Also we are trying remote control systemically, not by hardware control, to run parallel with automatic driving and monitoring system which enable to control operation time, insolation, amount of snowfall automatically. We applied analysis of actual proof to both snow removal PV system and general PV power system, and these led to bear power consumption analysis while snow-removing, and its comparison after finishing the task as "One stone, two birds." In the long run, we could carry out economic analysis against snow removal system, and this helps to verify the most maximized control method for snow removal conditons on a basis of weather information. this study shall let prevent people from negligent accidents, and improve power generation problems as mentioned from the top. Ultimately, we expect to apply this system to heavy snowfall regions in winter season in spite of its limited system installaion in Korean territory, initially.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 1999

Species of the pillars in the 4 different buildings(Sudaridjang, Beopbojeon, Dongsaganjang, Seosaganjang) in which Tripitaka Koreana wood blocks are conserved were identified. 1. In 114 pillars, including 6 partially piled-up pillars, 73(64%) was Zelkova serrata, 17(14.9%) was Pinus koraiensis, 16(14%) was Pinus densiflora, 5(4.4%) was Abies holophylla, 2(1.8%) was Quercus sp., and 1(0.9%) was Pinus rigida. 2. The pillars from Sudarajang were consist of various species such as Pinus densiflora, Pinus Koraiensis, Abies holophylla, Quercus sp., and Zelkova serrata, whereas all 47 out of 48 pillars from Beopbojeon were consist of only one species-Zelkova serrata. 3. We can be inferred from the characteristics of the identified species that Beopbojeon whose pillars are made of only Zelkova serrata was built at least before the mid-Koryo dynasty followed by Sudarajang, but Dongsaganjang and Seosaganjang might be built far later than that time.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.777-781
• /
• 2005

Syndactyly and polysyndactyly are one of the most common congenital anomalies of upper limb. Although there are many surgical approaches, most of them require skin graft for covering the raw surfaces. Therefore these methods involve many disadvantages such as grafted skin contracture, web recurrence, skin graft loss and long operation time, and the grafted hyperpigmented skin and donor site of skin graft, which lead to poor results aesthetically. The authors treated seven cases with a Hayashi's new method in four patients. In this method, tissue of interdigital space are regarded as forming 4 facets of a two piled cube. A dorsal rectangular flap on dorsum of interdigital web makes a new interdigital space. One side of divided digit is coverd with lateral based plantar flap and the other side of divided digit is covered with subcutaneous pedicled flap and remnant web skin. The authors could obtain natural deep interdigital space without web recurrence and scar contracture in 7 cases. Moreover this method does not require skin grafting, accordingly produces better aesthetic results without hyperpigmentation and donor site scaring. Therefore we report this operation technique, which might be used as one of the standard in surgical correction of syndactyly and polysyndactyly.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.105-115
• /
• 2017

PURPOSES : The occurrence of unexpected disasters, including fire events, increases as the road network becomes complicated and traffic volume increases. When a fire event occurs on and under bridges, the damage extensively influences direct damage to structures, vehicles, and human life and secondary socioeconomic issues owing to traffic blockage. This study investigated potential fire-hazard risks on bridges of the Korean national route road. METHODS : The investigation was conducted using field investigation and analysis with satellite pictures and road views from commercial websites and the Bridge Management System (BMS). From the filed investigation, various potential fire resources were identified. The satellite pictures and road views were helpful in measuring and recognizing conditions underneath bridges, stowage areas, etc. RESULTS : There are various potential fire resources underneath bridges such as piled agricultural products, parked petroleum tanks, construction equipment, and attached high-voltage cables. A total of 94.6% of bridges have underneath clearances of less than 15 m. A bridge underneath volume that can stow a potential fire hazard resource was $7,332m^3$ on average, and most bridges have about $4,000m^3$ of space. Based on the BMS data, the amounts of PSC and steel girders were 29% and 25%, respectively. CONCLUSIONS : It was found that the amount of stowed potential fire hazard resources was proportional to the underneath space of bridges. Most bridges have less than 15 m of vertical clearance that can be considered as a critical value for a bridge fire. The fire risk investigation results should be helpful for developing bridge fire-protection tools.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.451-456
• /
• 2012

In this study, a numerical analysis to evaluate the reduction of seismic load due to pile group was performed and compared the peak ground acceleration(PGA) measured at free-field and foundation. The special attention was given to the amplification of seismic acceleration on the foundation due to the pile effects. The analysis considering pile effects was carried out for 4, 8 and 12 piles with same condition by PLAXIS 2D Dynamics. Based on the analysis results, it is found that the overall reduction in seismic load due to foundation and reduction rates are similar irrespective of pile numbers. This study gives a possibility for effective design of piled foundation by reducing seismic load about 20~25%.