• 한국지반환경공학회 논문집
• /
• 제20권3호
• /
• pp.21-30
• /
• 2019

복합말뚝(Composite Pile)이란, 수평력이 크게 작용하는 구간에는 강관말뚝, 작게 작용하는 구간에는 PHC말뚝을 특수한 연결 장치로 결합한 말뚝으로서 토목 구조물의 기초 재료로써 상용화되는 추세에 있다. 이러한 복합말뚝의 핵심은 강관말뚝과 PHC말뚝을 연결하는 연결 장치의 안정성과, 이음 위치를 산정하는 설계기준이라고 할 수 있는데 국내에서는 복합말뚝 이음부 위치에 대한 정확한 시방규정이 없어서, LH 설계처(한국토지주택공사, 2009)에서는 도로설계요령 제3권(한국도로공사, 2001)을 참고하여 작성한 "복합말뚝 설계적용 및 설계도서 표기 방안 검토"를 복합말뚝 설계의 기준으로 사용해 오고 있지만 복합말뚝의 단면변화라고 볼 수 없어 적용에 한계성을 가지고 있는 실정이다. 이에 따라 본 연구에서는 복합말뚝의 단면 변화부(강관말뚝과 PHC말뚝의 이음부) 위치에 대한 설계기준을 제안하고 이에 대한 안정성 및 경제성을 검토하고자 실험적인 방법과 해석적인 방법을 이용하여 연결장치에 대한 안정성을 검증하였으며, 국내 교량공사 교대 79개소에 시공된 복합말뚝 설계자료를 분석하여 말뚝 본체 및 이음부에 작용하는 응력, 휨모멘트, 변위 등의 경향성을 파악하였고, 개선식이 적용된 재설계 과정을 통해 이음부에서 발생한 응력들이 연결장치와 PHC말뚝의 허용응력 수치 내로 발생하는 것을 확인하였다. 결론적으로 사례분석을 통한 복합말뚝 이음위치의 설계 제안식은 복합말뚝을 설계함에 있어서 안정성과 경제성을 모두 고려한 개선된 설계기법임을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.201-212
• /
• 2014

Due to the sea-crossing bridge span is generally large and main pier pile foundations are located in deep water and carry large vertical load, sea-crossing bridge main pier pile foundations bearing mechanism and load deformation characteristics are still vague. Authors studied the vertical bearing properties of sea-crossing bridge main pier pile foundations through pilot load tests. Large tonnage load test of Qingdao Bay Bridge main pier pile program is designed by using per-stressed technique to optimize the design of anchor pile reaction beam system. Test results show that the design is feasible and effective. This method can directly test bearing capacity of main pier pile foundations, and analysis bearing behaviors from test results of sensors which embedded in the pile. Through test study the vertical bearing properties of main pier pile foundation and compared with the generally short pile, author summarized the main pier pile foundations vertical bearing capacity and the main problem of design and construction which need to pay attention, and provide a reliable basis and experience for sea-crossing bridge main pier pile foundations design and construction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 기초기술학술발표회
• /
• pp.11-29
• /
• 2002

Current design of pile group is based on the estimation of the overall bearing capacity of a pile group from that of a single pile using a group efficiency. However, the behaviors of a pile group are influenced by various factors such as method of pile installation, pile-soil-pile interaction, cap-soil-pile interaction, etc. Thus it is practically impossible to take into account these factors reasonably with the only group efficiency, In this paper, a new method for the design of pile groups is proposed, where the significant factors affecting the behavior of a pile group are considered separately by adopting several efficiencies. Furthermore, in the proposed method, the load transfer characteristics of piles and the difference of pile behaviors with respect to the pile locations in group can be taken into account. The efficiencies for the method are determined using the settlement failure criterion, which is consistent with the concept of allowable settlement for structures. The efficiencies calculated from the results of existing model tests are presented, and the bearing capacity of a pile group in the other model test is calculated and compared with that from the test result, to verify the validity of the proposed method.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.31-40
• /
• 2003

현행 무리말뚝 설계에서는 하나의 무리효율을 이용하여 개별말뚝의 지지력으로부터 전체 무리말뚝의 지지력을 산정하고 있다. 그러나, 무리말뚝의 지지 거동은 말뚝 시공 방법, 말뚝지반말뚝 상호작용, 캡-지반말뚝 상호작용 등의 복합적인 영향을 받으며, 따라서 하나의 무리효율만으로 이렇게 다양한 영향 요소들을 합리적으로 고려하는 것은 불가능하다. 본 논문에서는 다양한 효율을 도입하여, 이들 영향 요소들을 분리하여 고려할 수 있는 무리말뚝 설계 방법을 제안하였다. 제안된 방법에서는 이 외에도 말뚝의 하중 전이 특성과 위치에 따른 말뚝 거동의 차이를 고려할 수 있으며, 침하 기준을 이용한 효율의 산정을 통해 침하 관점의 설계가 이루어질 수 있다. 기존의 모형실험 결과로부터 제안된 설계 방법에 적용할 수 있는 효율을 산정하여 제시하였으며, 이를 이용하여 또 다른 모형 실험의 지지력을 산정하고 시험결과와 비교함으로써 제안된 방법의 유효성을 평가하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 말뚝기초 학술발표회
• /
• pp.65-84
• /
• 2000

Europe and US which have more restrictive regulations than Korea about the noise and vibration during construction are using Auger-cast Pile to reduce the problem relating with noise and vibration. However Auger-cast Pile has problems like difficult quality control and low bearing capacity. In Europe, Displacement in-situ concrete Pile has been used to sove that problems since 1990s, and Korea has performed the test construction in 1997 and it has been used as the real structural foundation since 1998. Test and real construction results verified that the allowable capacity of the pile(diameter = 410mm) is between 70 and 100ton. Though De Beer & Van Imps design method utilizing CPT result is used to calculate the bearing capacity of the Displacement in-situ Pile, Korea is dependant upon the SPT as the sounding test, so design method utilizing SPT result is necessary to promote the application of the pile. To find out reasonable design method using SPT result, rearing capacity of the pile constructed in sand and clay in Korea was calculated using Meyerhof, SPT-CPT translation method, Nordlund, Douglas and DM-7 method, and the calculation results were compared to the load test result. Analysis result shows that SPT-CPT translation method is more reliable than others and economical design can be possible because it considers efficiently the friction capacity of Displacement in-situ Pile.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1287-1294
• /
• 2006

A pile is compressed with settlements when loading and bearing capacity is altered along relative displacement of pile/soil on settlement and compression. Settlements of pile displaying limit skin friction is different from displaying tip resistance. Therefore, it is an error in traditional method that bearing capacity of pile is estimated from the sum of limit skin fraction and tip resistance. Accordingly, development of design method considering behavior of load-settlement is needed. In this study, we would like to establish the base for development of design method considering bearing capacity altering along displacement on settlement and compression. For this, we established system and substance of design method. And in order to establish relationship of load-settlement of pile on the type of soil, we analyzed and arranged existing database and pile loading test. On design method, settlement is assumed gradually on each capacity level being assumed gradually. Bearing capacity developing on the pile is obtained on each settlement level. Until the obtained bearing capacity will be equal to assumed capacity, this process is continued with increasing settlement. Load-settlement curve for soil classification is sketched in the process computing settlement on assumed capacity. This design method will be materialized by computation program.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 말뚝기초위원회 워크샵
• /
• pp.35-52
• /
• 1999

This paper addresses on new codes of practice, limit state design; load resistance factored design and Eurocode 7, which have recently been adopted by foundation engineers in North America and European Communities. A brief description of the limit state design concepts and some introductions to Australia and Sweden national code for pile foundation are made on behalf of pile capacity determination. Also, simple closed form solution for rational resistance factor when resistance is log-normally distributed, has been derived for pile foundation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.221-224
• /
• 2006

For structural engineers, design of pile cap causes difficulties since design of this member is not specifically addressed by codes. In general, pile cap is considered as deep beam and designed for shear and moment at specified critical section. This is called as traditional section method. However, many international design codes suggest the application of strut tie method for better design of this member. In this paper, a brief application of strut tie method to the design check of pile cap structure designed by section method is presented. Unlike well known pile cap with single column, the example pile cap has two columns. In order to find out proper load path under various load condition, three dimensional finite element method was carried out. The result indicates that provided reinforcement by traditional section method has sufficient capacity to meet the design requirements.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.409-416
• /
• 1997

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.198-198
• /
• 2011

Cooling and Heating system using Geothermal energy in the country has shown rapid development in the research and business field during about 10 years. However, like other renewable energy sources, high initial construction cost is acting as an obstacle to apply widely. Therefore Energy pile system(Heat Exchanger inserted inside the structure pile) that can save about 25 % initial construction cost has been studied in European countries and recently being studied in our country. Therefore, KPECO(Korea Electric Power Corporation) is also studying energy pile system to improve cooling & heating system in substation that install about 200 pile. KPECO is aimed to make energy pile design, construction and maintenance standards because substation has good applicability. In this study, we studied to make new grout material and design program to make optimized design & counstruction method of energy pile system. And planing to peform field test for energy pile system in a 154 kV substation to obtain long-term behavior and efficiency of the system.