• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.197-203
• /
• 2008

This study analyzed the characteristics of sea water transport between Busan New-port and the Nakdong River estuary. Numerical modeling was used to evaluate the characteristics of the tidal current. Numerical simulations of three different topographies were conducted. The results are summarized as follows: 1) The volume of sea water transport was reduced by $0.7{\sim}18.4%$ when water depth was decreased at Busan New-port (10 m); 2) The volume of sea water transport was increased by $3.5{\sim}21.9%$ when a channel (depth 5 m) was constructed in the direction of the Nakdong River estuary.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.29-36
• /
• 2018

Background: The purpose of this study was to investigate the effect of leg lift difference on serratus and upper trapezius when exercising in a scapula in a prone position, a typical waist stabilization exercise for subjects with a winged scapula. Method: Twenty normal adults and 20 subjects with winged scapula participated in the experiment. The surface EMG recordings were obtained from external oblique muscle and internal oblique muscle during scapula protraction exercise. The presence or absence of winging of the shoulder bone was measured using an electronic digital caliper for the distance the medial border of the scapula is lifted to the rear. In prostrate pier movement posture in both groups, both legs supporting, dominant leg lifting, and non-dominant leg lifting including the scapula protraction were conducted respectively. Results: In the results of comparison between the two groups, the dominant external oblique muscle and the non-dominant internal oblique muscle tended to increase according to the difference of the leg lifting of normal people. In the winged scapula group, internal oblique muscle showed increased muscle activity more than external oblique muscle. Conclusion: It was most effective to exercise with lifting the same position leg for strengthening the same external oblique muscle, and the opposite internal oblique muscle. Also, it is effective to exercise in prone pier movement posture for trunk stability. In addition, internal oblique muscle shows increased muscle activity in subjects with winged scapula. Therefore, appropriate adjustment of external oblique muscle and internal oblique muscle may have a positive effect on scapula dysfunction for trunk stability.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.177-186
• /
• 2024

Purpose : The purpose of this study was to use oral instruction and taping to induce abdominal draw-in in the previous study, but there is a lack of research on the comparison of effects. Therefore, in this study, we would like to study how the effect of oral instruction, taping, and no feedback can affect muscle activity when performing abdominal draw-in pier exercises. Methods : Before the experiment, group A trained piers and applied only draw-in piers, group B applied taping feedback, and group C were divided into three groups per week for six weeks, and three sets of contractions for five seconds per group were performed five times, and a minute break was provided between each exercise. As a measurement tool, a wireless surface electromyography (EMG) was used to measure surface electromyography (Telemyo-DTS, NORAXON, USA) that derives a synthetic unit of muscle using a surface electrode. For statistical processing of data, the analysis is performed using the SPSS/PC Version 25.0 statistical program for Windows, and the statistical significance level is a=.05 Results : First, the duration was somewhat shorter in order to more accurately compare the muscle activity of the core muscles. Therefore, future research needs to be research that can be exercises with precise biofeedback and taping applied over a longer period of time. Secondly, it is believed that there is no significant difference, since the subjects were studied in healthy young adult men and women, not patients. Thirdly, they could not control the daily life of the subjects. Through future research, it is necessary to analyze the correlation between muscle activity and abdominal muscle thickness by adding ultrasound in addition to muscle activity in various age groups. Conclusion : During draw-in bridge exercise according to feedback, the muscle activity of the back muscle increased, and there was no significant difference in the muscle activity of the back muscle according to each feedback. Therefore, both the feedback applied during the draw-in pier exercise and the control group are effective in changing the thickness of the abdominal muscles.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.4
• /
• pp.33-42
• /
• 2007

This paper describes the state-of-the art research activities on seismic isolation systems for improving the seismic capacities of the bridges in Korea. Though Korea is located in a region of low-to-moderate seismicity, the construction of seismic isolation systems has increased rapidly. The application of seismic isolation system has become popular worldwide because of its stable behavior and economical construction especially for bridge structures. Since optimal reliability level of isolated bridges can be determined as the one that provides the highest net life-cycle benefit to society, or the minimum Life-Cycle Cost (LCC), an optimal design procedure based on minimum LCC concept is more expedient for the design of seismically isolated bridges in areas of low-to-moderate seismicty. To verify the adequacy of the new design concept based on the LCC minimization, experimental studies on seismically isolated bridge are introduced as well, which include pseudo-dynamic test of scaled pier and dynamic field test of full-scale. With the application of seismic isolation systems, many kinds of dampers to improve the seismic capacity of structure are also applied not only to new bridges but also to existing bridges.

• Smart Structures and Systems
• /
• v.11 no.1
• /
• pp.19-34
• /
• 2013

The objective of this paper is to develop on-line system parameter estimation and damage detection technique from the response measurements through using the Recursive Covariance-Driven Stochastic Subspace identification (RSSI-COV) approach. To reduce the effect of noise on the results of identification, discussion on the pre-processing of data using recursive singular spectrum analysis (rSSA) is presented to remove the noise contaminant measurements so as to enhance the stability of data analysis. Through the application of rSSA-SSI-COV to the vibration measurement of bridge during scouring experiment, the ability of the proposed algorithm was proved to be robust to the noise perturbations and offers a very good online tracking capability. The accuracy and robustness offered by rSSA-SSI-COV provides a key to obtain the evidence of imminent bridge settlement and a very stable modal frequency tracking which makes it possible for early warning. The peak values of the identified $1^{st}$ mode shape slope ratio has shown to be a good indicator for damage location, meanwhile, the drastic movements of the peak of $2^{nd}$ mode slope ratio could be used as another feature to indicate imminent pier settlement.

• Smart Structures and Systems
• /
• v.4 no.3
• /
• pp.367-389
• /
• 2008

Shape Memory Alloys (SMAs) are unique materials with a paramount potential for various applications in bridges. The novelty of this material lies in its ability to undergo large deformations and return to its undeformed shape through stress removal (superelasticity) or heating (shape memory effect). In particular, Ni-Ti alloys have distinct thermomechanical properties including superelasticity, shape memory effect, and hysteretic damping. SMA along with sensing devices can be effectively used to construct smart Reinforced Concrete (RC) bridges that can detect and repair damage, and adapt to changes in the loading conditions. SMA can also be used to retrofit existing deficient bridges. This includes the use of external post-tensioning, dampers, isolators and/or restrainers. This paper critically examines the fundamental characteristics of SMA and available sensing devices emphasizing the factors that control their properties. Existing SMA models are discussed and the application of one of the models to analyze a bridge pier is presented. SMA applications in the construction of smart bridge structures are discussed. Future trends and methods to achieve smart bridges are also proposed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1251-1258
• /
• 2006

Field evaluation of new scour countermeasure using geobag and aggregate is performed to prepare for the basis of design and construction standard in Korea. Polyester non-woven geotextile is determined as a geobag material and tire cord is used to sew up the geobag which contain aggregate. Hwasang-gyo(bridge) is selected as a pilot test site through office review and field investigation. According to the design flood of Hwasang-gyo(bridge), the size and volume of geobag are calculated and construction area and required number of geobags are computed by considering the specification of the pier and foundation of the bridge. After construction, scour depth around geobag construction area is measured and the stability of geobag is ascertained by using pole and digital camera.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.573-589
• /
• 2015

In order to investigate the seismic behavior of highway bridges under near-fault earthquakes, a parametric study was conducted for different regular and irregular bridges. To this end, an existing regular viaduct Highway Bridge was used as a reference model and five irregular samples were generated by varying span length and pier height. The seismic response of the six highway bridges was evaluated by three dimensional non-linear response history analysis using an ensemble of far-fault and scenario-based near-fault records. In this regard, drift ratio, input and dissipated energy as well as damage index of bridges were compared under far- and near-fault motions. The results indicate that the drift ratio under near-fault motions, on the average, is 100% and 30% more than far-fault motions at DBE and MCE levels, respectively. The energy and damage index results demonstrate a dissipation of lower energy in piers and a significant increase of collapse risk, especially for irregular highway bridges, under near-fault ground motions.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.445-452
• /
• 2006

A new Energy-Dissipating Sacrificial Device(EDSD) is proposed, which can effectively dissipate the energy stored in the structures during seismic actions. A mathematical 3-D bridge models and analysis techniques are developed to represent the non-linear behavior of the EDSD, various seismic responses of a sample bridge with the EDSD are analyzed in terms of energy, member forces and deformation using the developed analysis method. And the EDSD is tested and certified it's behavior and stability to apply on exiting bridges. The EDSD can be able to dissipate a large amount of energy and therefore it can prevent the pier's excessive forces under seismic excitations and EDSD and its connected members are also stable. Additionally, the method and guidelines of an optimum EDSD design are proposed in terms of installation method and decision of number of EDSD. The Proposed EDSD under seismic excitations can significantly decrease the excessive storing energy in the bridge structures and reduce the relative displacements of each superstructure to the ground. The EDSD is also found to function as a structural fuse under strong ground motions, sacrificing itself to absorb the excessive energy. Consequently, economical enhancement of the seismic performance of bridges can be achieved by employing the newly developed energy dissipation sacrificial device(EDSD).

• Computers and Concrete
• /
• v.23 no.6
• /
• pp.445-457
• /
• 2019

Cracks are an important distress of concrete bridges, and may reduce the life and safety of bridges. However, the traditional manual crack detection means highly depend on the experience of inspectors. Furthermore, it is time-consuming, expensive, and often unsafe when inaccessible position of bridge is to be assessed, such as viaduct pier. To solve this question, the real-time automatic crack detecting system with unmanned aerial vehicle (UAV) become a choice. This paper designs a new automatic detection system based on real-time comprehensive image processing for bridge crack. It has small size, light weight, low power consumption and can be carried on a small UAV for real-time data acquisition and processing. The real-time comprehensive image processing algorithm used in this detection system combines the advantage of connected domain area, shape extremum, morphology and support vector data description (SVDD). The performance and validity of the proposed algorithm and system are verified. Compared with other detection method, the proposed system can effectively detect cracks with high detection accuracy and high speed. The designed system in this paper is suitable for practical engineering applications.