• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.165-168
• /
• 1994

The paper deals with the fuzzy PI control of a switched reluctance motor drive. Fuzzy algorithm based on linguistic rules describing the operator's control strategy is applied to speed control of the SRM. Simulation and experimental results show that performance of the furry PI controller is superior to that of conventional PI controller. In particular the robustness of the system is improved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.75-80
• /
• 1999

In this study, we have investigated the relationship between the generation of pretilt angle and the polarization component in cells with UV light irradiation on polyimide (PI) surface. It was found that the generated pretilt angle is about $1.4^{\circ}$ with S-polarized UV light irradiation of $75^{\circ}$ on PI surface; it may be attributed to the asymmetry triangular of polymer surface with oblique S-polarized UV light irradiation on PI surface. Also, we measured that the generated pretilt angle is about $2.0^{\circ}$ with oblique P polarized UV light irradiation of $75^{\circ}$ on PI surface. Consequently, we suggest that the generated pretilt angle of the NLC is attributed to the interaction between the LC molecules and the polymer surface with oblique polarized UV light irradiation on PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.498-501
• /
• 2003

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$. The fast response time of TN cell using high birefringence with ${\Delta}nd=0.363$ on the rubbed PI surface was measured 5.1 ms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.477-480
• /
• 2003

We investigated the electro-optical (EO) performances of the super twisted nematic liquid crystal display (STN-LCD) on the polyimide (PI) surface using polymer film. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance (V-T) curve of the plastic STN-LCD was observed on the polyimide (PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide (PI) surfaces using polymer film can be achieved. However, the transmittance of the plastic STN-LCD on the polyimide (PI) surfaces using polymer film decreased greatly as cell gap decreases.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.200-206
• /
• 2014

This paper deals with deterministic PI controller design based on dynamic characteristics for refrigeration system. The temperature control system of an oil cooler is described as a typical 2nd order model of the refrigeration system which has zeros in a transfer function. PI controller gains satisfying control specifications are represented by the dynamic characteristic functions using relationship between the parameters and the control specifications in the model. Phase margin was considered to increase robustness of the oil cooler control system. Furthermore, the influence of zeros in the model to the control specifications was analyzed in detail for improving control performance. The validity of the suggested PI controller design was investigated using the four types of gains which had been already confirmed their control performances through experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.374-374
• /
• 2010

Charge transfer mechanism of poly(4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (TP6F PI) which exhibits bistable ON and OFF switching has been studied using photoemission electron spectroscopy (PES) and near-edge x-ray absorption fine structure (NEXAFS). Here, we demonstrate novel set-up in which holes are injected by photoemission process instead of direct charge carrier injection via metal electrode. The accumulated charges on the PI surface in the OFF state abruptly flow across the PI film when the bias voltage of a back electrode reaches a specific value, indicating that the film is changed to the ON state. Core level and x-ray absorption spectra probed at charge injection region via photoemission process do not show any evidences implying structural modification of TP6F PI during the phase change. Whereas, in valence band spectra, the highest occupied molecular orbital (HOMO) is shifted toward Fermi level, responsible for improved hole-mobility of TP6F PI of ON state.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.41-47
• /
• 1997

Fault diagnosis problem is currently a subject of extensive research in the control field. Although there are several works on the fault detection and isolation observers and the residual generators, those are con- cerned with only the detection of actuator failures or sensor failures. So, the perfect detection and isolation for the actuator and sensor failures is strongly required in the field of the practical applications. In this paper, a strategy of fault diagnosis using multiple proportional integral (PI) observers including the magnitude of actuator failures is provided. It is shown that actuator failures are detected and isolated perfectly by monitoring the integrated error between actual output and estimated output by a PI observer. Also in presence of complex actuator and sensor failures, these failures are detected and isolated by multiple PI observers.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.1
• /
• pp.25-33
• /
• 2009

Let ${\pi}:E{\rightarrow}B$ be a Serre fibration with fibre F. We prove that if the inclusion map $i:F{\rightarrow}E$ has a left homotopy inverse r and ${\pi}:E{\rightarrow}B$ admits a cross section ${\rho}:B{\rightarrow}E$, then $G_n(E,F){\cong}{\pi}_n(B){\oplus}G_n(F)$. This is a generalization of the case of trivial fibration which has been proved by Lee and Woo in [8]. Using this result, we will prove that ${\pi}_n(X^A){\cong}{\pi}_n(X){\oplus}G_n(F)$ for the function space $X^A$ from a space A to a weak $H_*$-space X where the evaluation map ${\omega}:X^A{\rightarrow}X$ is regarded as a fibration.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.497-499
• /
• 1993

Irradiation of 4-biphenylyl-4-methyl-2-cyclohexenone (5) in benzene or methanol produced trans-6-biphenylyl-5-methylbicyclo[3,1,0]hexan-2-o ne (5a) and 3-biphenylyl-4-methylcyclohex-2-enone (5b). Electronic configurations of the excited states for 5a and 5b were assigned as n, ${\pi}^*$ and ${\pi}$, ${\pi}^*$ triplet states respectively. Irradiation of 4-methyl-4(${\beta}$-naphthyl)-2-cyclohexenone in benzene or methanol gave 4-methyl-3-(${\beta}$ -naphthyl)-2-cyclohexenone (6a), which is thought to arise from ${\pi}$, ${\pi}^*$ triplet state.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.497-502
• /
• 1994

A new chiral stationary phase (CSP) for the liquid chromatographic resolution of enantiomers was prepared from (S)-naproxen and 3,5-dinitroaniline. The 6-alkoxy-2-naphthyl group of the CSP was presumed to act as a ${\pi}$-basic interaction site for resolving ${\pi}$-acidic racemates while the 3,5-dinitroanilide group of the CSP was presumed to play a role as a ${\pi}$-acidic interaction site for resolving ${\pi}$-basic racemates. From the chromatographic resolution trends of N-alkylamide derivatives of ${\alpha}$-arylalkylamines on the CSP prepared, the chiral recognition mode involving the intercalation of the amide alkyl chain of the less retained enantiomers between the connecting tethers of the CSP was proposed.