• Geomechanics and Engineering
• /
• v.12 no.6
• /
• pp.983-1001
• /
• 2017

The extent by which economy and safety concerns can be addressed in earth retaining structure design depends on the accuracy of the assumed failure surface. Accordingly, this study attempts to investigate and quantify mechanical backfill properties that control failure surface geometry of cohesionless backfills at the active state for translational mode of wall movements. For this purpose, a small scale 1 g physical model study was conducted. The experimental setup simulated the conditions of a backfill behind a laterally translating vertical retaining wall in plane strain conditions. To monitor the influence of dilative behavior on failure surface geometry, model tests were conducted on backfills with different densities corresponding to different dilation angles. Failure surface geometries were identified using particle image velocimetry (PIV) method. Friction and dilation angles of the backfill are calculated as functions of failure stress state and relative density of the backfill using a well-known empirical equation, making it possible to quantify the influence of dilation angle on failure surface geometry. As a result, an empirical equation is proposed to predict active failure surface geometry for cohesionless backfills based on peak dilatancy angle. It is shown that the failure surface geometries calculated using the proposed equation are in good agreement with the identified failure surfaces.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1722-1724
• /
• 1996

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted as out of the ways of deposition ultrathin films. We have studied manufacturing conditions and physical properties of Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB films made by Kuhn type apparatus. A ${\pi}-A$ isotherm shows that a limiting area is around $180{\AA}^2/molecule$ and a proper surface pressure for a deposition is around 22mN/m. A transfer ratio shows that Hexadecyl Dipyridinium-$(TCNQ^-)_2$ is able to be deposited as an Y-type. UV /visible absorption spectra shows that TCNQ dimer peak is apeared at about 600nm in LB films. In solution, $TCNQ^-$ peak is observed at about 400nm and charge transfer band at $830{\sim}900nm$. A horizontal conductivity of the Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB film is about $10^{-7}(S/cm)$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.306-319
• /
• 2013

This study explores various issues of appearance management behavior for plus-size women in Korea with a focus on clothing. In-depth interviews and focused group interviews were conducted with 24 plus-size women. The interviews were recorded and the transcripts were analyzed based on grounded theory. Discomfort was the main phenomenon involving the experience of plus-size women related to appearance management. Psychological as well as physiological/physical discomfort, unmet needs (regarding clothing) and inconvenient shopping experiences were frequently mentioned. Causal conditions for discomfort were obesity, social stigma, and an underdeveloped clothing market for plus-size consumers. Interviewees developed strategies to cope with discomfort (suppressing clothing need, loss of interest in clothing, diversion from clothing needs, sole focus on physical comfort, dress-up and increase in shopping channels, and change in shopping patterns) that depended on contextual conditions (such as duration of obesity and attitudes of people) close to the interviewees. The discomfort of interviewees decreased or continued depending on if they became ambivalent about their obese condition, lost weight, or utilized plus-size specialty stores.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.19-29
• /
• 1998

The calcination reactivity of limestone and physical property changes of calcined lime were investigated with a temperature($720~1000^{\circ}C$ under atmospheric gas($N_2$, $CO_2$) conditions. The mechanisms of mass transport in a lime matrix were represented by the evaporation and condensation (${\gamma}=1.7$) at $1000^{\circ}C$ and the volume diffusion (${\gamma}=2.7$) at $800^{\circ}C$, which was obtained by the specific surface area of calcined lime with sintering conditions. Also, the effect of physical property on the reactivity of sulfation reaction was determined by the changes of pore size with $lime-SO_2$ reaction in this work. The initial sulfation rate of calcined lime increased with increasing temperature, whereas the capture capacity of $SO_2$ exhibited a maximum value at $900^{\circ}C$. The pore volume of sulfated lime was decreased with increasing sulfation time, but the major pores shifted to the distribution of larger size at a temperature of $850{\;}~{\;}1000^{\circ}C$. The mean pore size of sulfated lime based on pore volume decreased gradually at $1000^{\circ}C$; however, it increased with sulfation time up to 40 min and rapidly decreased thereafter.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.62-68
• /
• 1978

Equilibrium moisture content of rough rice is an important factor because it has a close relationship to storage and drying problems. Determination of the EMC for 10 different varieties of rough rice were made in atmospheres of various constant humidities at three different constant temperatures. In addition , some physical properties were also measured for two different levels of moisture content of the samples. The results may be summarized as follows ; 1. Several physical properties of ten different varieties of rough were measured. Significant difference of the properties was appeared between the varieties in which the difference was pronounced in the dimensions of the varieties. Also, all the dimensions were increased as the moisture content of the rough rice was increased from 14 % to 16%. 2. Significant difference of the equilibrium moisture content was also appeared between some of the varieties in which the equilibrium moisture content of Josaengtongil and Minehikari was 24.26% while that of the others was in the range between 18 to 19% at the conditions of relative humidity of 84% and temperature of 47℃ , respectively. Similar pattern was also observed in other conditions. 3. The values of the constant of Henderson's equation were calculated from the data obtained but they are believed to be useful until more precise and complete data are obtained. There was a good agreement between the calculated and experimental results.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.103-108
• /
• 2010

Single crystals of $ZnWO_4$ with [100], [010] and [001] directions were successfully grown by the Czochralski method. The seed crystals for the single crystal growth of $ZnWO_4$ could be induced by the crystal growth using platinum wires applied by the capillary action from the melt. The growth conditions in each direction were investigated in terms of the variations of rotation speed, pulling rate and diameter of the grown crystals. The formation of cracking in the grown crystals during the cooling process could be prevented by annealing effect. The growth directions of the grown crystals were determined using Laue back reflection. The microscopic characteristics of the grown crystals in each direction were discussed, and their physical properties were evaluated for hardness, thermal expansion coefficients and dielectric constants.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.289-293
• /
• 2008

Porous HAp with three-dimensional network channels was prepared in a polymer foam process using a in-situ formation. HAp/polyol with various HAp solid contents was formed with an addition of isocyanate. Under all conditions, the obtained porous HAp had pore sizes ranging $50\;{\mu}m$ to $250\;{\mu}m$. The influence of the HAp content on the physical and mechanical properties of porous HAp scaffolds was investigated. As the solid content increased, the porosity of the porous HAp decreased from 79.3% to 77.9%. On the other hand, the compressive strength of the porous HAp increased from 0.7 MPa to 3.7 MPa. With a HAp solid content of 15 g, the obtained porous HAp had physical properties that were more suitable for scaffolds compared to other conditions.

• Journal of Life Science
• /
• v.6 no.1
• /
• pp.14-26
• /
• 1996

In order to effectively utilize fish(Cod, Gadus macrocephalus) bone obtained as fish waste in fish manufactory, the preparation of the fish bone gelatin were attempted by heat extracting method from collagen protein contained in the fish bone. The methods of two kinds pretreatments (the B-type by alkali pretreatment and the E-type by enzyme pretreatment) for fish bone and the optimal extraction conditions to prepare gelatin from pretreated fish bone were investigated. Physical properties and functionalities of the two type fish bone gelatins obtained were compared with the commercial gelatin and the fish skin gelatin. The optimal extraction conditions of the B-type and the E-type gelatins were 5 folds of added water with material(w/w), pH 5.0, 3 hrs of extraction time and 60$\circ$C of extraction temperature. The yield of the B-type and the E-type gelatins were 32.6% and 28.1 %, respectively. The B-type gelatin was superior to the E-type un all physical properties. Molecular weight of the B-type was larger than that of the E-type due to its pretreatment method. Among the composition of amino acids, the amino acids such as glycine, alanine, glutamic acid and imino acids(proline and hydroxyproline) were responsible for 68$\sim$70% of the total amino acids. Functionalities of the fish bone gelatin were almost similar to commercial gelatin.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.25-32
• /
• 1998

A combined PC and TV monitor has been developed in several companies. The characteristics of physical user interface in this monitor are likely to vary from existing monitors. Therefore, two experiments to investigate the physical interface characteristics of this monitor were conducted. The first experiment was to investigate the characteristics of color perception with monitor coating (coating vs. non-coating) and screen brightness (30fL vs. 35fL) in the PC mode. The second experiment was to investigate the characteristics of luminance contrast with monitor coating and image movement (static vs. dynamic) in the TV mode. Twenty-three subjects (male 12, female 11) were participated in this experiment. In the first experiment, average color temperatures were obtained in all experimental conditions. There was a significant difference between coating and non-coating screen at 0.1 level. In the second experiment, average luminance contrasts were obtained in all experimental conditions. There was a significant difference between coating and non-coating screen at 0.05 level. In addition, there was a significant difference between static picture and dynamic picture at 0.1 level.