• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.83-90
• /
• 2021

In this study, effects of the physical and chemical properties of low temperature heated carbon on electrochemical behavior as a secondary battery anode material were investigated. A heat treatment at 600 ℃ was performed for coking of petroleum based pitch, and the manufactured coke was heat treated with different heat temperatures at 700~1,500 ℃ to prepare low temperature heated anode materials. The physical and chemical properties of carbon anode materials were studied through nitrogen adsorption and desorption, X-ray diffraction (XRD), Raman spectroscopy, elemental analysis. Also the anode properties of low temperature heated carbon were considered through electrochemical properties such as capacity, initial Coulomb efficiency (ICE), rate capability, and cycle performance. The crystal structure of low temperature (≤ 1500 ℃) heated carbon was improved by increasing the crystal size and true density, while the specific surface area decreased. Electrochemical properties of the anode material were changed with respect to the physical and chemical properties of low temperature heated carbon. The capacity and cycle performance were most affected by H/C atomic ratio. Also, the ICE was influenced by the specific surface area, whereas the rate performance was most affected by true density.

• Plant Biotechnology Reports
• /
• v.4 no.1
• /
• pp.61-73
• /
• 2010

Quantitative trait loci (QTL) associated with six physical traits of cooked rice and seven chemical properties of rice grain were identified using a recombinant inbred (RI) population of rice evaluated over 3 years at the National Honam Agricultural Research Institute in Korea. The RI population consisted of 164 lines derived from a cross between Milyang23 and Gihobyeo, and the genetic map consisted of 414 molecular markers. A total of 49 QTL were identified for the 13 physico-chemical properties using composite interval mapping. Of these, 13 QTL were identified for 2 or more years, while 36 were detected in only 1 year. Five QTL were identified over all 3 years and will be useful for marker-assisted improvement of rice grain quality in Korea. The two QTL with the highest LOD scores, adhesiveness1.2 and potassium content7.1, provide a valuable starting point for positional cloning of genes underlying these QTL.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.6
• /
• pp.87-95
• /
• 2011

This study investigates Youl Chon Industrial Complex 1 by dividing into three regions : the drainage site, the area inside the complex, and the seaside. Then each region was subdivided into three areas resulting in a total of nine areas for soil sampling and analysis. After analyzing the physical and chemical properties of the soil, all nine area's pH and EC readings indicated that the soil condition is not suitable for vegetation growth (according to the previous study, the pH level was 5.8 and EC was 2.0dS/m). Therefore, for Youl Chon Industrial Complex 1 to become green, the neutralization and reduction of pH and EC level is needed; first, vegetation through dredging soil, and second, introduction of halophytes is suggested. This study finds out that vertical changes in physical and chemical properties of soils in reclaimed sites are very variable and the result depends on surrounding environments, so it suggested the basic data for building vegetation or reclaimed sites. However, the additional study aiming at various reclaimed sites is required as this study was conducted only to limited areas, and this study has left monitoring analysis as the follow-up task to check the relations between a plant community and soils.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2839-2842
• /
• 2014

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.52-60
• /
• 2001

Physical properties of foams depend on the density of foams, Physical properties of base polymers, open ceil contents, and cell structures including the size, size distribution, shape of ceil and the thickness of membrane and strut. The density of foam is affected by raw materials, concentration oi crosslinking agent and blowing agent and process parameters such as processing technique and condition. Ethylene vinyl acetate copolymer(EVA) foam is a crosslinked cellular material. The foaming characteristics and physical properties of EVA foam are affected by decomposition rate of blowing agent. In this study, the decomposition rate of blowing agent and crosslinking rate, foaming characteristics and physical properties of foams were evaluated. The slow decomposition rate of blowing agent results in low density foam, good shock absorption property and uniform cell size distribution compared to the high decomposition rate of blowing agent.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.4
• /
• pp.341-346
• /
• 2016

This study was conducted to analyze soil physico-chemical properties of agricultural land composed from the river-bed sediments. We investigated the changes of soil physico-chemical properties at 30 different sampling sites containing paddy, upland and plastic film house from 2012 to 2015. pH, exchangeable calcium and magnesium decreased gradually in paddy soils during the four years, whereas the available $P_2O_5$, exchangeable Ca, Mg and EC increased in upland and plastic film house soil. For the soil physical properties, bulk density and hardness of topsoil were $1.47g\;cm^{-3}$ and 21.5 mm and those of subsoil were $1.71g\;cm^{-3}$ and 25.7 mm in paddy soils. In upland soils, bulk density and hardness of topsoil were $1.48g\;cm^{-3}$ and 15.9 mm and those of subsoil were $1.55g\;cm^{-3}$ and 16.9 mm. In plastic film house soils, bulk density and hardness of topsoil were $1.42g\;cm^{-3}$ and 14.4 mm and those of subsoil were $1.40g\;cm^{-3}$ and 18.5 mm, respectively. The penetration hardness was higher than 3 MPa below soil depth 20 cm, and it is impossible to measure below soil depth 50 cm. As these results, in agricultural anthropogenic soils dredged from river basins, the pH, amount of organic matter and exchangeable cations decreased and soil physical properties also deteriorated with time. Therefore, it is needed to apply more organic matters and suitable amount of fertilizer and improve the soil physical properties by cultivating green manure crops, deep tillage, and reversal of deep soils.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.136-141
• /
• 2023

Polyacrylic rubber (ACM) is well known for its excellent heat resistance and chemical stability. Additionally, its performance can be readily manipulated by modifying its functional groups, rendering it highly attractive to various industries. However, extreme climate changes have necessitated an expansion of the operating temperature range and lifespan of ACM products. This requires the optimization of both the compounding process and functional-group design. Hence, we investigated the relationship between the cross-linking system and mechanical properties of an ACM with a carboxylic cure site. The crosslink density is determined by chemical kinetics according to the structure of additives, such as diamine crosslinkers and guanidine accelerators. This interaction enables the manipulation of the scotch time and mechanical properties of the compound. This fundamental study on the correlation analysis between cross-linking systems, physical properties, and storage stability can provide a foundation for material research aimed at satisfying the increasingly demanding service conditions of rubber products.

• The Korean Journal of Ecology
• /
• v.20 no.3
• /
• pp.157-162
• /
• 1997

Changes on soil physical and chemical properties following the forest fire in Kosung area in Kangwon province were examined. Twenty seven sampling plots[16 burned (8 low intensity fire, 8 high intensity fire) and 11 unburned plots] from Pinus densiflora community were chosen and soil samples from three depths(0-5, 5-15, 15-25 cm) under the forest floor were collected. Forest fire in the area affected soil chemical properties. Soil pH, available phosphorus, base saturation, K, Ca, and Mg on the surface soil(0-5cm) in the burned areas compared with the unburned areas were increased, while soil properties on the subsurface soil(5-25 cm) were not changed. Organic matter, total nitrogen, available phosphorus, and exchangeable cations following the high in tensity fire on the surface soil were generally lower than those in the low intensity fire areas. This indicates that these nutrients on high intensity fire areas may be volatilized. The results suggest that the fire effects on soil chemical properties were confined mainly to the surface soil and were different between the high and the low intensity fire types.

• Geomechanics and Engineering
• /
• v.13 no.3
• /
• pp.371-384
• /
• 2017

Physical and mechanical properties of rocks are of interest in many fields, including materials science, petrophysics, geophysics and geotechnical engineering. Uniaxial compressive strength UCS is one of the key mechanical properties, while density and porosity are important physical parameters for the characterization of rocks. The economic interest of carbonate rocks is very important in chemical or biological procedures and in the field of construction. Carbonate rocks exploitation depends on their quality and their physical, chemical and geotechnical characteristics. A fast, economic and reliable technique would be an evolutionary advance in the exploration of carbonate rocks. This paper discusses the ability of ultrasonic wave velocity to evaluate some mechanical and physical parameters within carbonate rocks (collected from different regions within Tunisia). The ultrasonic technique was used to establish empirical correlations allowing the estimation of UCS values, the density and the porosity of carbonate rocks. The results illustrated the behavior of ultrasonic pulse velocity as a function of the applied stress. The main output of the work is the confirmation that ultrasonic velocity can be effectively used as a simple and economical non-destructive method for a preliminary prediction of mechanical behavior and physical properties of rocks.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.502-507
• /
• 2003

The thermal and physical properties of low density polyethylene melt-blended with Metallocene linear low density polyethylenes were investigated. Since the Metallocene polyethylenes have similar MW and MWD except m-LLDPE4, it can be said that the thermal behavior and mechanical properties of the blends depend upon the l-octene comonomer content. The melting behavior of LDPE/m-LLDPE1 blends shows two melting peaks with LDPE contents higher than 50%, while the other blends show only one melting peak. It was observed that the blends show higher crystallization temperature and higher crystallinity with lower comonomer content. Initial modulus of a blend exhibited the behavior proportional to the crystallinity and the elongation at break of the blends was increased with increasing the m-LLDPE composition. Melt indices of the blends decreased with increasing the comonomer content of Metallocene LLDPE. Melt Index values of the blends show negative deviation.