• Nano
• /
• 제13권10호
• /
• pp.1850117.1-1850117.11
• /
• 2018

Sulfated $TiO_2$ nanoparticles were successfully immobilized on zeolite through improving hydrolysis-deposition method. Microstructure, crystallization, surface state and surface area of composite catalysts were characterized by SEM, XRD, FTIR spectra, XPS and BET and the photocatalytic activity was evaluated by degradation of methyl orange under UV irradiation. We optimized these factors ($SO^{2-}_4$ ions, calcination temperature and loading amount of sulfated $TiO_2$) on photocatalytic activity and crystallization of composite photocatalysts. The results indicated that the $SO^{2-}_4$ ions are successfully immobilized on the surface of $TiO_2$, and sulfated $TiO_2$/zeolite show the highest photocatalytic activity for methyl orange at the $[SO^{2-}_4 ]/[Ti^{4+}]$ molar rate of 1:1, calcination temperature of $600^{\circ}C$ for 2 h, and sulfated $TiO_2$ loading amount of 40%, respectively.

• Nano
• /
• 제13권12호
• /
• pp.1850149.1-1850149.10
• /
• 2018

Ferroelectric particles have been applied in the photocatalytic field because the spontaneous polarization results in the internal electric field, which can accelerate the separation and migration of photogenerated carriers. In this study, the $BaTiO_3$ (BT) fibers are synthesized by electrospinning. The BT fibers calcined above $800^{\circ}C$ exhibit a strong ferroelectric property, which is verified by a typical butterfly-shaped displacement-voltage loop. It is found that the BT fibers with the single-domain structure exhibit better photocatalytic performance than that with the multi-domain configuration. When the single-domain transforms into multi-domain, the integrated internal electric field correspondingly breaks up, inducing that the internal electric field might cancel each other out and diminish the separation of photogenerated carriers. Also, the Au nanoparticles can improve the photocatalytic activity further on account of the surface plasmon resonance. Therefore, it is suggested that Au nanoparticles decorated on ferroelectric BT nanomaterials are promising photocatalysts.

• 한국건축시공학회지
• /
• 제14권4호
• /
• pp.359-368
• /
• 2014

Photocatalytic cement has been receiving attention due to its high oxidation power that reduces nitrogen oxide, thus contributing to a clean atmospheric environment. However, there has not yet been a thorough investigation on the effect of photocatalytic reactions on the durability of cementitious material, the parent material. In this study, photocatalytic cement samples were exposed to nitric oxide gas and UV along with cycles of wetting and drying to simulate environmental conditions. The surface of samples was characterized mechanically, chemically, and visually during the cycling. The results indicate that that the photocatalytic efficiency decreased with continued NO oxidation. The pits found from SEM indicated that chemical deterioration, such as acid attack or leaching, did occur. However, this was not confirmed by X-ray diffraction. The hardness was not affected, probably due to the formation of CSH as evidenced by the XRD pattern. In conclusion, it was found that photocatalysis could alter cementitious materials both chemically and mechanically, which could further affect long-term durability.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.40-42
• /
• 2002

TiO$_2$/Fe$_2$O$_3$composite thin films were prepared on common glass substrates by sol-gel processing and dip-drawing method. The effect of Fe$_2$O$_3$content on the photocatalytic and hydrophilic properties of composite films was studied. The results indicate that the photocatalytic activities of composite TiO$_2$films are superior to that of pure TiO$_2$film, and the film containing 0.5% Fe$_2$O$_3$has the best photocatalytic activity. The hydrophilicity is difference with variant Fe$_2$O$_3$content, the films containing 0.05% ~0.1% Fe$_2$O$_3$have the best hydrophilicity and their contact angles are 0。.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1116-1120
• /
• 2002

Using thermal hydrolysis and hydrothermal treatment, photocatalytic $TiO_2$ powders were synthesized. During the synthesis, the addition of other transition metals such as iron, copper, etc., affected the photocatalytic capability of synthesized powders, and enabled the activation by visible light. To enhance photocatalytic capacity of gas phase decomposition, the rate-determining adsorption rate of pollutant gases were improved via surface modification of $TiO_2$ powders. The surface modifiers were implanted using mechanochemical synthesis of dopants and photocatalytic powders.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.161-164
• /
• 2019

This study describes the development of graphene-$TiO_2$ conjugates for the enhancement of the photocatalytic efficiency of $TiO_2$. Graphene-based hybrid nanomaterials have attracted considerable attention because of the unique and advantageous properties of graphene. In the proposed hybrid nanomaterial, graphene serves as an electron acceptor to ensure fast charge transfer. Effective charge separation can, therefore, be achieved to slow down electron-hole recombination. This results in an enhancement of the photocatalytic activity of $TiO_2$. In addition, increased adsorption and interactions with the adsorbed reagents also lead to an improvement in the photocatalytic activity of graphene-$TiO_2$ hybrid nanomaterials. The acquired result is encouraging in that the photocatalytic activity of $TiO_2$ was initiated using visible light (630 nm) instead of the typical UV light.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.248-249
• /
• 2014

Photocatalytic cement is receiving attention due to its high oxidation power that oxidizes nitrogen oxides (NOx), thus contributing to clean atmospheric environment. However, there has not been a thorough investigation on durability of a parent material, cementitious material, as a result of photocatalytic reactions. In this study, durability of photocatalytic cementitious materials exposed to nitrogen dioxide (NO₂) gas was examined. Titanium dioxide (TiO₂) nanoparticles containing cement paste samples were exposed to cycles of NO₂ with UV light, followed by wetting and drying to simulate environmental condition. The surface of samples was characterized mechanically, chemically, and visually during the cycling. The results indicate that the photocatalytic efficiency decreased with continued NO₂ oxidation due to calcium carbonate formation. The pits found from SEM demonstrate that chemical deterioration have occurred, such as acid attack or leaching. In conclusion, the photocatalytic reactions and its product could alter cementitious materials chemically and mechanically which could further affect long-term durability.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.226-230
• /
• 2005

This paper describes the photocatalytic degradation properties by oxygen partial pressure for TiO$_2$ thin films fabricated by dc magnetron reactive sputtering. And the structural, chemical, optical and photocatalytic properties were investigated at various analysis system. When TiO$_2$ thin film was made at deposition time of 120 min and Ar:O$_2$ ratio of 60:40, the best properties were obtained. That results were as follows: thickness; 360∼370 nm, gram size; 40 nm, optical energy band gap; 3.4 eV and Benzene conversion in the photocatalytic degradation; 11 %.

• Environmental Engineering Research
• /
• 제20권2호
• /
• pp.181-189
• /
• 2015

A composite material was tested to eliminate phenol in aqueous solution combining adsorption on activated carbon and photocatalysis with $TiO_2$ in two different ways. A first implementation involved a sequential process with a loop reactor. The aim was to reuse this material as adsorbent several times with in situ photocatalytic regeneration. This process alternated a step of adsorption in the dark and a step of photocatalytic oxidation under UV irradiation with or without $H_2O_2$. Without $H_2O_2$, the composite material was poorly regenerated due to the accumulation of phenol and intermediates in the solution and on $TiO_2$ particles. In presence of $H_2O_2$, the regeneration of the composite material was clearly enhanced. After five consecutive adsorption runs, the amount of eliminated phenol was twice the maximum adsorption capacity. The phenol degradation could be described by a pseudo first-order kinetic model where constants were much higher with $H_2O_2$ (about tenfold) due to additional ${\bullet}OH$ radicals. The second implementation was in a continuous process as with a fixed bed reactor where adsorption and photocatalysis occurred simultaneously. The results were promising as a steady state was reached indicating stabilized behavior for both adsorption and photocatalysis.