• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.835-847
• /
• 2015

Photo scanning can create point cloud and polygon models like 3D scanners bringing an object into the 3 dimensional world by combining several sheets of photographic information. The created data give us information about planes and sectional forms required for a 2 dimensional survey as well as 3 dimensional figures of buried cultural property. It requires a lot of time to record buried cultural property in the field, however, the photo scanning technique does not need additional equipment and manpower so the work may begin immediately while the property is protected. Moreover, it reduces financial burdens as it creates 3 dimensional data using images acquired by photography but provides the optimal condition to check 3 dimensional information quickly and easily.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.211-217
• /
• 2008

A $ZrO_2$ coating solution containing $ZrO_2$ photo-catalysis, which is transparent in visible light, was prepared by the hydrolysis of alkoxide, and thin films on the $SiO_2$ glass substrate were formed in a dipcoating method. These thin films were heat-treated at temperatures ranging from $250^{\circ}C-800^{\circ}C$ and their characteristics were subjected to thermal analysis, XRD, spectrometry, SEM, EDS, contact angle measurement, and AFM. Tetragonal $ZrO_2$ phase was found in the thin film heat treated at $450^{\circ}C$, and anatase $TiO_2$ phase was detected in the thin film heat-treated at $600^{\circ}C$ and above. The thickness of the films was approximately 300 nm, and the roughness was 0.66 nm. Thus, the film properties are excellent. The films are super hydrophilic with a contact angle of $4.0^{\circ}$; moreover, they have self-cleaning effect due to the photo catalytic property of anatase $TiO_2$.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.4
• /
• pp.62-67
• /
• 2002

Energy conversion soda-lime-silica glasses doped with Eu3+ were produced and they were used to build small scale modules of $100\times100cm$ simulating the roof of glass house with which the rearing state of a small number of young and grown vegetables was observed. The vegetables selected for the study were eggplant, kale, and pimento. The width and length of their leaves along with the photosynthesized ability and chlorophyl content were measured to observe the growing state of the vegetables in the given periods of time. It was found that the vegetables grown under the photo-conversion glass made panels had higher values of the leaf width and length by 5 to 30% than them under the commercially available ordinary glass panels depending on the kind of vegetables. The photosynthesized abilities were also shown much higher for the vegetables under the conversion glass panels than for the non-conversion ones.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.13-19
• /
• 2002

In a different way of satellite image or aerial photo, the image acquired by terrestrial photogrammetry has to go through complicated management according to the desired precision and analysis range. In this study, digital surface model and ortho image for cultural asset, terrestrial structures, were made by reflectorless total station in order to increase the application of single photo, and that was analyzed and compared with the method using stereo image. Single photo is expected to be utilized as the measuring method for drawing cultural assets or examining the stability of slope in which high precision doesn't need by performing the various geometric and visual analysis using ortho image made by excluding the difficulties of acquisition and plotting of stereo image.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.71-81
• /
• 2021

Purpose: This study to seek to answer two research questions in distribution science: what photo decoration cues in online grocery stores could be identified? Could photo decoration cues significantly effect on the affective perception and behavioral intention of consumers? Research design, data, and methodology: his study conducted a laboratory experiment with a 2×2×2 factorial design to validate the proposed research model and test our proposed hypotheses. Research design, data and methodology: Two stages experiments were adopted in this study, among 360 voluntaries who have had an experience of online grocery shopping, 331 valid data had been collected and analyzed using MANOVA and PLS-SEM algorism. Results: (1) both reflective surface and complementary goods layout lead to visual appeal and shopping enjoyment; (2) contrast color usage positively impacts on visual appeal while does not significantly affect shopping enjoyment; (3) consumers' affective responses positively impact attitudes toward product and store which in turn lead to purchase intention and store loyalty. Implications for research and practice are discussed. Conclusions: Using the media richness theory, visual rhetoric theory and visual design literature as the theoretical foundation, the study provides a solid foundation to comprehend the impact of photo design artifacts on consumers' affective responses when online consumers shopping online for fresh grocery.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.10-16
• /
• 2018

In silicon crystalline PV (Photo Voltaic) industry, PV module or panel electric power is directly related to the companies' profit. Thus, many PV companies have invested and focused on R&D activities to get the higher module power. The main BOM (Bills of Material) on the module consists of PV solar cell, ribbon, EVA (Ethylene-Vinyl Acetate copolymer), glass and back sheet. Based on consistent research efforts on enhancing module power using BOM, there have been increase of around 5 watt per module every year as results. However, there are lack of studies related to enhancing accuracy of measurement. In this study, the enhancing on the metrology is investigated and the improvement shows actually contribution to company's profit. Especially, the measurement issues related to heat and to quasi state of bandgap diagram by EL(Electro Luminescence) are described in this study.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.77-85
• /
• 2022

Today's universities have a keen interest in educational reform. The issue of population decline in college-age due to population decline is not new. Universities have been developing quantitatively for a long time and are now considering ways to survive rather than qualitative growth. Since the sharp decline in the school-age population due to the population decline has no clear solution immediately, universities are overcoming this crisis by creating many alternatives. Attracting international students is one of them. In this study, the effectiveness of photovoice was examined through the analysis of the case of the Korean-Japanese convergence cartoon class. The photo-voice method has sufficient potential as a teaching method for foreign convergence classes and can be expected to play a role as a teaching method suitable for students participating in convergence classes with different social, cultural, and linguistic backgrounds. In particular, in the convergence class, since participating students generate research materials through photo production, it can be a tool for inner exploration necessary for webtoon production and a tool for narrative inquiry for storytelling. It is expected that expanding the understanding and use of photo voice will have the methodological value of convergence classes. In addition, the teaching method using photo voice produced in the composition of photos and stories is likely to be used as an appropriate tool for convergence classes for students with different social, cultural, and linguistic backgrounds.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.180-188
• /
• 1994

Error assessment and evaluation for machine for machine tool slides have been considered as essential tools for improving accuracy. In this paper, a computer aided measurement technique is proposed using photo pin diodes of quadrant type and laser source. In thedeveloped system, three photo diodes are mounted on a sensor mounting table, and the sensored signal is processed by specially designed signal conditioner to give fine resolution with minimum noise. A micro computer inputs the processed signal, and the geometric errors of five degree of freedoms are successfully evaluated. Pitch, roll, yaw, vertical and horizontal straightness errors are thus assessed simultaneously for a machine tool slide. Calibration techniques such as optics calibration, photo diode calibration are proposed and implemented, giving precise calibration for the measurement system. The developed system has been applied to a practical machine tool slide, and has been found as one of efficient and precise technique for machine tool slide.

• Journal of Korean Society of Forest Science
• /
• v.5 no.1
• /
• pp.10-15
• /
• 1966

1) The purpose of this study was to compare the forest survey by ground method with that by aerial photo method. 2) In this study, the forest type map was made by use of the radial line plotter and radial line triangulation method. 3) The difference between the area found by the forest type map above mentioned and that by compass surveying on the ground was none-significant. 4) On aerial photo the stratification was carried out very easily. 5) The following sampling methods were applied : line plot method, representative sampling method and stratified random sampling on the aerial photo. 6) In confirming sampling point the line plot method and the representative sampling method were easier than another. 7) As to stands volume the maximum value was given by stratification, and the minimum by line plot method.