• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.677-682
• /
• 2015

In this paper, we investigated the effect of light on the performance of the receiver system noise and external noise added from the ever-present influence in general optical system. And calculated the reception sensitivity of the receiver at the time of off-keying transmission - from the optical transmission system in consideration of the case that the photo detector has a quantum yield of less than one-one. Not less than 50 it was confirmed that it is possible to configure the low power system is calculated and compared with the case where less than 300 the receiver sensitivity of the optical system to maintain the standard error probability. However, even if these values were considered, and the preamplifier in the receiver, considering a case of using a low-output light source, so that a heavy burden in the value less than the actual system installation, using the light source having less than the output, as shown in Figure 3, the results that were obtained also may be used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.161-167
• /
• 2012

Portable devices such as smartphones with built-in wireless LAN to the prevalence of anyone using. But the wireless Internet connection and positioning services are limited to high-quality wireless service, they may not be available. Thus, wireless LAN infrared sensor in the same way as with angry alternative way wireless capabilities of the application automatically identify the location of the Sensor application as an alternative method is proposed. Thus, wireless LAN, such as infrared sensors and other alternzative methods of wireless features in a way where the application can recognize and automatically recognize the sensor application as an alternative method is proposed. Sensor is signals between wireless LAN and access points using the sensitivity, WLAN antenna with omni-directional signal output operation of the sensor is assumed to be recognize this by putting a direction to obtain through the proposed algorithm, Sensors such as photo-coupler without direct recognition sensor, wireless LAN and access points, the same function as the connection between the sensitivity to perform its function was to utilizing.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.41-44
• /
• 2010

The Cu thickness dependence of magnetic sensitivity for the NiFe/Cu/NiFe/IrMn spin valve multilayer was investigated. The magnetic properties measured by minor MR curves for the Ta(5 nm)/NiFe(8 nm)/Cu(3.5 nm)/NiFe(4 nm)/IrMn(8 nm)/Ta(2.5 nm) multilayer is MR = 1.46 %, MS = 2.0 %/Oe, $H_c\;=\;2.6\;Oe$, and $H_{int}\;=\;0.1\;Oe$. The magnetic sensitivities of GMR-SV devices with ten different widths and a same length of $4.45\;{\mu}m$ by fabricated by photo lithography decreased from 0.3 %/Oe to 0.06%/Oe as from a width of $10\;{\mu}m$ to $1\;{\mu}m$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.57.1-57.1
• /
• 2010

Development of low cost hybrid functional nano-structured materials has great interest to enhance sensitivity of dye-sensitized solar cells and reduction of the production cost. In this talk we will discuss about using different processes to modify functional characteristics of photoelectrode and investigate effects of chemical modification without significant structural variation on to enhance performance of DSSCs. Efficient electron transportation between dye molecules and photoelectrode has been obtained by appropriate chemical modification and efficiency of DSSC has been significantly improved. A comparative analysis on effects of surface functional and electron states of photoelectrode on VOC and JSC has been also carried out to discuss effects of composite materials on physical structure and electronic properties to correlate enhanced performance of these devices.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.1.1-11
• /
• 1994

The photosensitive properties and carrier transport in the organic photoconductor with the carrier transport layers(CTL) of polymer matrix doped with two carrier transport materials above carrier generation layer(CGL) containing oxotitanium phthalocyanine (TiOPc) were investigated. The CGL of TiOPc dispersed in poly(vinylbutyral) was formed as thickness of 0.1${\mu}{\textrm}{m}$and the carrier transport layer was prepared by coating polycarbonate and polyester doped with oxadiazoly(OXD), polyvinylcarbazole (PVK), trinitro fluorenone(TNF) as thickness of 10~15${\mu}{\textrm}{m}$, respectively. We have measured half decay exposure,sensitivity and xerographic gain from the photo-induced discharge curve(PIDC). In this work, it was found that the characteristics of carrier transport were mainly caused by the ionization potential difference of constitutive materials in molecularly doped polymer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.242.2-242.2
• /
• 2011

Molecularly imprinted polymer thin films were applied to develop a gas sensor based on the surface plasmon resonance phenomenon for small gaseous molecules such as toluene and xylene. The imprinted polymer films were synthesized via photo-polymerization method using various combination of templates, functional monomers and cross-linkers. The temperature of pre-polymerization solutions and the power of UV light were controlled for optimized performance of gas sensing. The morphology and porosity of the polymer films were controlled by varying the mixing ratios of the pre-polymerization solutions and confirmed by atomic force microscopy. By fitting the adsorption/desorption sensorgrams to conventional kinetic models, the effects of different templates and cross-linkers were interpreted in term of the structural differences of the polymer networks formed on the gold film. The sensitivity and selectivity of sensors were estimated for toluene and xylene, and also for humidity and other gaseous molecules such as formaldehyde and ammonia.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.35-37
• /
• 2002

Conceptual design of the next generation PET with both high sensitivity and high spatial resolution has been performed. A detector unit using a depth encoding scheme was designed and constructed for trial. The unit consists of four Gd$_2$SiO$\sub$5/:Ce crystal blocks in a 2x2x4 array coupled to a position-sensitive photomultiplier tube having metal channel dynodes and 4x4 multi-anodes. Our proposed detector is a very reliable and simple solution suitable for volume PET devices since the proposed depth encoding scheme does not need additional photo-detectors.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2016

Recent light-enhanced metal oxide gas sensors are reviewed in this article. The basic mechanisms of a light-enhanced metal oxide gas sensor are discussed. Many literatures reveal that the standalone sensitivity and the response/recovery time enhancements enabled by the exposing light are not as high as the performance enhancement provided by external heating. Therefore, both optimal amount of external heating and exposed light intensity are necessary to increase the performance of these light-enhanced gas sensors. The development of highly light sensitive materials and structures is important to lower the overall power consumptions of the sensors.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.201-204
• /
• 2002

A high accuracy ozone monitor using UV absorption method was developed for ambient ozone monitoring. The system was mainly composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit. The optical signal from the CCD array that provides unusually high response and excellent optical resolution for ozone concentration was converted to digital signal and the digital signal was displayed on screen using PC interface. The optical signal was propagated using optic fiber to reduce optical loss to increase the accuracy of the measuring system. This paper has been studied a interworking signalling protocol between two hybrid networks by analyzing Satellite B-ISDN architecture, DSS2 Layer 3 Signalling protocol, B-ISUP protocol, S-BISUP protocol stack and so on. Also in the paper, messages and primitives have been defined for B-ISDN's Connection Type, Ownership and each protocol in order to connect point-to-multipoint. The ozone sensing properties of the CCD ozone monitor was compared with those of the photo multiplier ozone monitor.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.281-285
• /
• 2009

Mobile robot has various sensors for describing the external world. The ultrasonic sensor widely applied to the most mobile robot to detect the obstacle and environment owing to low cost, its easy to use. However, ultrasonic sensor has major problems: the uncertainty information of sensor, false readings caused by specular reflection, multi path effect, low angular resolution and sensitivity to changes in temperature and humidity. This paper describes a sensor system for map building of mobile robot. It was made of low cost PSD (Position Sensitive Detector) sensor array and high speed RISC MPU. PSD sensor is cost effective and light weighting but its output signal has many noises. We propose heuristic S/W filter to effectively remove these noises. The developed map building sensor system was equipped on a mobile robot and was compared with ultrasonic sensor through field test.