• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.77-79
• /
• 1997

A 5Gbps LiNb $O_3$ optical phase modulator was packaged and described. A APE(annealed proton exchange) method was employed for the optical waveguide and the electrode of ACPS (asymmetric coplanar strip) type was formed by electro-plating on LiNb $O_3$ fort applying microwave signal. The resulted phase modulator exhibited a single mode at a 1550nm wavelength and Its modulation bandwidth, Insertion loss and driving voltage showed 7$^{GHz}$, 3. $O^{dB}$ and 6V. respectively.y.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.34-35
• /
• 2000

A Y-branch phase modulator made of an electro-optic(EO) polymer has been designed and fabricated. An EO polymer, PMMA-DR1, is used for the core layer, and UV-curable polymers, UV-15 and UV-15 LV, for the cladding layers. The rib type polymeric waveguides are fabricated by the reactive ion etching method and their EO effects are obtained by the poling process. The optical properties of the fabricated phase modulator are as follows: the halfwave voltage, $V_{\pi}$, is 25 V, the insertion loss of TM mode is 13.8 dB, and the intensity modulation is 0.17 % (V).

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2006

In this paper, a predistortion linearizer using the in-phase modulator is proposed. The harmonic generator of the proposed predistorter extracts a second harmonic signals. These signals are divided in-phase and quadrature-phase signals, and then amplifying each signals using variable gain amplifier. An in-phase modulator, modulate fundamental signal with second harmonic signals, generates the predistortion intermodulation distortion (IM) signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed intermodulation distortion signals of power amplifier effectively. The proposed linearizer has been implemented to operate in Cellular-band. The test results show that the third order IM is cancelled more than 20dB in case of CW 2-tone signals with ${\Delta}f$=1MHz. Also, it's improved the adjacent channel power ratio (ACPR) more than 7dB for IS-95 CDMA 1FA signals.

• Journal of the Optical Society of Korea
• /
• v.5 no.3
• /
• pp.76-82
• /
• 2001

The optical response for traveling-wave Mach-Zehnder modulators without-with phased reversal is successfully derived in more concise and succinct form than any other equations before. The obtained equation is applied to a bandpass traveling-wave modulator with 3-section phase reversal and is confirmed to be in reasonable agreement with the experimental data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.575-583
• /
• 2003

In thesis we applied the short or open reflection type for IQ vector modulator The open or short type is operated even exception of other redundancy circuit. Generally IQ vector modulator uses MESFET in performing reflection open or short, then minus voltage which is having complex structure is required to operate MESFET via IQ signal. However BJT can be substituted for MESFET, BJT is improved characteristics like as cutoff frequency, electron mobility and so on. We used BJT in IQ vector modulator which is compatible with TTL level in I,Q digital signal, and attached AGC function. We got the result of operations within ${\pm}$ 1$^{\circ}$ phase and ${\pm}$ 0.6 dB amplitude Variation With full range of 20 dB and Variation of ${\pm}$ 6$^{\circ}$ Phase and ${\pm}$ 0.5 dB amplitude Versus full temperature range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.939-942
• /
• 2002

The optically addressed and electrically addressed spatial phase only light modulators without pixelized structures have been developed. A sufficient phase modulation capability and a high diffraction efficiency of these devices are useful for practical applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.149-155
• /
• 1996

In this paper, we designed binary phase grating with SA (simulated annealing) algorithm for image generation, and used LCTV(liquid crystal television) as phase modulator. We generated optical image using LCTV which controlled by personal computer in real time. Many parameters in SA algorithm are determined by average deviation of the cost function, not experimental method. It was confirmed that the LCTV could be used as a phase modulator through mach-zehnder interferometering experiment. The various optical images are generated in real itme by fourier transforming of the phase gratings on LCTV which is controlled by personal computer and they can be used for optical interconnection in a neural network and addressing information in a volume hologram etc.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.22-28
• /
• 2015

We propose a new method for improving the phase contrast of a multiphase digital holographic microscope using a spatial light modulator (SLM). Using the SLM as the annulus, our method improves the light contrast of the object edge to achieve higher accuracy. We demonstrate a digital holographic microscopy technique that provides a 30% improvement in the phase contrast compared to conventional microscopy, which utilizes a mechanical annulus. The phase-contrast improvement allows the 3D reconstructed hologram to be determined more precisely.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.2
• /
• pp.1-6
• /
• 1973

Traveling wave laser phase modulator, which is consist of rectangular waveguide paritially loaded with electrooptic material, is analysed theoretically. The propagation characteristics, electric field, attenuation, and modulation index are obtained in terms of normalized parameters. It is shown that high modulation index is achieved with relatively low modulating power. And also design procedure of modulator is described with particulary refererenece to KDP.