• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.393-398
• /
• 2005

In order to treat flow problems for an unsaturated soils, it is required the mediation of the coefficient of permeability with variation of suction. The coefficient of permeability for soils can be determined by the direct or indirect methods. The direct methods of permeability can be performed either in the laboratory or in the field. The indirect methods can be predicted from the soil-water characteristics curve. Laboratory test methods to measure the coefficient of permeability can be categorized into two types, steady-state and unsteady-state. In this study, the coefficient of permeability for unsaturated soils was determined by the modified apparatus for steady state-method(Klute, 1972) and was predicted from the equations of Brooks and Corey(1964) and Van Genuchten(1980). Experimental results were compared with predicted coefficient of permeability and verified applicability of the two equations.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.31-42
• /
• 2000

압밀과 투수는 흙의 중요한 공학적 특성중 하나이다. 일반적으로 점토에 대한 압밀 및 투수계수는 표준압밀시험을 통한 간접적인 방법에 의해 구해지고 있다. 그러나 표준압밀시험은 시료의 포화문제, 간극수압의 측정이 용이하지 않을 뿐 아니라, 횡방향 압밀시험을 수행 할 수 없어 그나마 정확한 횡방향 압밀계수를 산정할 수 없다. 그리고 압밀계수를 구하는데 가장 널리 이용되고 있는 해석방법인 Taylor방법과 Casagrande 방법은 2차압밀이 불분명하고 초기 직선부분을 찾을 수 없는 경우에 대해서는 신뢰성이 떨어진다고 할 수 있다. 따라서 본 논문에서는 이러한 실험상의 단점을 보완할 수 있게 제작된 Rowecell을 이용하여 포항지역의 이암풍화토를 이방성 및 시료의 크기를 고려해 횡방향압밀시험을 실시하고 이 결과를 4가지 해석방법$(Taylor,\; Casagrande,\; Hyperbolic,\; \delta/t-logt)$으로 비교 분석하여 해석방법에 따른 압밀계수의 차이점을 파악하였다. 또한 투수계수(k)와 간극비(e)의 관계를 규정할 수 있는 투수상수를 해석방법에 따라 구하였으며, 압밀시험에서 계산된 간접투수계수의 타당성을 검증하기 위해 Rowecell을 이용한 직접투수시험을 실시하고 그 결과를 비교하였다.

• 한국농공학회지
• /
• 제43권2호
• /
• pp.122-131
• /
• 2001

When mixed with lime, sand-bentonite mixture is characterized by considerable hydraulic properties similar to natural pozzolans and may therefore be increased in the strength of sand-bentonite mixture. The present study reports that results obtained in a series of laboratory tests carried out using particular mixing ratio of lime-sand-bentonite with the aim of investigating physical characteristics, permeability and strength. The results were compared and analyzed according to hydration time and lime content. Test results showed that increasing of strength and decreasing of permeability by proper lime content. Curing for longer periods increased unconfined compressive strength of mixture. Based on results of the falling head permeability test, mixtures of lime content 3%, 6% and 9% were satisfied in using as liner after 8-day curing periods.

• 대한토목학회논문집
• /
• 제36권2호
• /
• pp.207-217
• /
• 2016

투기계수는 콘크리트의 공극뿐만 아니라 공극크기, 공극분포, 공극간의 굴곡특성에 의해서도 영향을 받는다. 투기계수는 시멘트 페이스트의 미세구조에 의해 지배되는데, 시멘트 페이스트 및 골재 각각이 콘크리트의 투기성능에 미치는 영향을 다룬 연구는 드물다. 더우기, 탄산화가 투기계수에 큰 영향을 미칠 수 있음에도 불구하고, 탄산화된 콘크리트에 대한 투기계수를 다룬 연구는 더욱 드문 실정이다. 본 연구의 목적은 탄산화 및 비탄산화된 콘크리트의 투기계수를 추정할 수 있는 기초적 접근방법을 개발하는 것이다. 본 연구에서는 미세구조 모델 및 시멘트의 경화특성을 기초로 투기계수를 산정할 수 있는 해석적 기법이 제안되었다. 탄산화된 콘크리트에서 감소된 공극량이 계산되었으며 이는 투기계수의 산정에 이용하여 탄산화된 콘크리트의 투기계수를 계산하였다. 높은 물-시멘트비를 갖는 콘크리트는 탄산화로 인하여 투기계수의 감소가 더욱 뚜렷한 것을 확인되었다. 한편, 시멘트 페이스트에서 투기계수와 투수계수는 Klinkenberg 효과에 의한 선형관계가 성립되나, 콘크리트에서는 성립되지 않았다. 해석결과는 YOON's 실험방법을 수행하여 검증하였다.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.81-95
• /
• 2015

The permeability behavior of Ariake clays has been investigated by constant rate of strain (CRS) consolidation tests with vertical or radial drainage. Three types of Ariake clays, namely undisturbed Ariake clay samples from the Saga plain, Japan (aged Ariake clay), clay deposit in shallow seabed of the Ariake Sea (young Ariake clay) and reconstituted Ariake clay samples using the soil sampled from the Saga plain, were tested. The test results indicate that the deduced permeability in the horizontal direction ($k_h$) is generally larger than that in the vertical direction ($k_v$). Under odometer condition, the permeability ratio ($k_h/k_v$) increases with the vertical strain. It is also found that the development of the permeability anisotropy is influenced by the inter-particle bonds and clay content of the sample. The aged Ariake clay has stronger initial inter-particle bonds than the young and reconstituted Ariake clays, resulting in slower increase of $k_h/k_v$ with the vertical strain. The young Ariake clay has higher clay content than the reconstituted Ariake clay, resulting in higher values of $k_h/k_v$. The microstructure of the samples before and after the consolidation test has been examined qualitatively by scanning electron microscopy (SEM) image and semi-quantitatively by mercury intrusion porosimetry (MIP) tests. The SEM images indicate that there are more cut edges of platy clay particles on a vertical plane (with respect to the deposition direction) and there are more faces of platy clay particles on a horizontal plane. This tendency increases with the increase of one-dimensional (1D) deformation. MIP test results show that using a sample with a larger vertical surface area has a larger cumulative intruded pore volume, i.e., mercury can be intruded into the sample more easily from the horizontal direction (vertical plane) under the same pressure. Therefore, the permeability anisotropy of Ariake clays is the result of the anisotropic microstructure of the clay samples.

• 한국지반환경공학회 논문집
• /
• 제14권7호
• /
• pp.51-56
• /
• 2013

최근, 시강우량의 최대치의 기록이 매년 바뀌고 있으며 이로 인해 도로의 침수피해 사례가 증가하고 있다. 이러한 이유로 새로운 배수포장체가 개발되고 있으나 보조기층에 대해서는 별도의 고려가 없다. 본 연구에서는 보조기층의 강도와 투수성을 함께 고려한 적정입도분포 기준을 제안하며, 이때 실내실험을 통해 각각의 강도특성 및 투수성을 비교하고자 한다. 실험에 앞서 국내외 보조기층 기준에 대한 시방기준을 토대로 4가지의 대표적인 입도분포를 산정하고 이를 실험하였다. 실험에 있어서 강도특성은 회복탄성계수 산정을 비교하고, 투수특성은 수직방향의 상향 및 하향 투수계수를 비교하였다. 회복탄성계수 산정은 $M_R$ 시험을 통하였으며, 이때 본 연구에서는 진동삼축시험기기를 보완하여 이를 구현하도록 하였다. 투수시험의 경우에는 2가지 투수시험이 수행되었으며, 하향의 흐름에 대한 투수시험으로는 기존의 변수위 투수시험이 적용되었고, 상향의 경우 직경 150mm의 중형 Rowe Cell 투수시험기를 이용하여 시험을 수행하였다. 연구결과, 회복탄성계수와 투수계수의 결과들을 종합하여 포장체 보조기층의 강도특성과 투수특성을 모두 만족할 수 있는 적정입도분포를 선정하고, 이를 통해 적정입도기준 마련이 가능할 것으로 판단된다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.25-34
• /
• 2017

PURPOSES: The purpose of this paper is to evaluate interface performance while using various tack coat materials for asphalt overlay. METHODS : The evaluation was conducted with tracking test, permeability, and interface bond strength. Tracking test was conducted using an image processing technique, to investigate the susceptibility of the tack coat materials. BBS and pull-off test were conducted to evaluate bond strength. The permeability test was conducted to evaluate the effect of tack coat materials. RESULTS : Results reveal that the trackless tack coat material demonstrates less tracking compared to other materials. Moreover, both BBS and pull-off tests can effectively evaluate the bond strength at the interface. RSC-4 was measured less bond strength. Moreover, tack coat prevents water penetration through the surface and aids the extension of the surface life of asphalt pavement. CONCLUSIONS : Trackless tack coat demonstrated a high and consistent bond strength performance. The tack coat types demonstrate marginally different performance as function of curing times. Field applicability was tested based on visual observation. Therefore, these should be considered when trackless tack coat is slightly enhanced the pavement performance based on limited this study results. Finally, it is necessary to allow reasonable time for the tack coat to completely cure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.720-728
• /
• 2009

This thesis is results of numerical analyses about test results of discharge capacity apparatus using penetration method. Applicability of numerical approach with FEM technique, using Cam-clay model, was confirmed by analyzing the results of standard consolidation test before analyzing test results of discharge capacity apparatus using penetration method. Thus, input parameters for the model was convinced to be appropriate. For numerical analyses about test results of discharge capacity apparatus using penetration method, identical initial and loading conditions during tests were applied to simulate test results correctly. Effects of ground disturbance resulted from installment of vertical drains on the behaviors of consolidation were also simulated. Applicability of numerical approach was investigated by comparing test results with numerical ones. As results of them, both of consolidation settlement were found to be in good agreements so that its applicability was confirmed. As results of numerical estimation, degree of consolidation with the condition of considering smear zone was found to be delayed, compared with results without smear zone. On the other hands, parametric numerical analyses of changing parameters related to smear zone such as permeability and size of smear zone and permeability of vertical drain were also carried out.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.59-67
• /
• 2015

PURPOSES : In this study, an image analysis method is used to evaluate the pore structure characteristics and permeability of hybrid concrete. METHODS : The binder weight of hybrid concrete is set to $400kg/m^3$, $370kg/m^3$, and $350kg/m^3$, and for each value of binder weight, the pore structure and permeability of concrete mixture is evaluated. The permeability of hybrid concrete is evaluated using a rapid chloride penetration test(RCPT). RESULTS : The concrete pore structure characteristics of hybrid concrete reveals that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. The permeability of the hybrid concrete for all values was measured to be below 1000 C, which indicates a "Very Low" level of permeability relative to the evaluation standard of KS F 2711. Additionally, as the binder weight is decreased, there is a significant increase in the permeability of chloride ions. CONCLUSIONS : In this study, the pore structure characteristics of hybrid concrete at different binder weights shows that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. Consequently, chloride ion penetration resistance of the hybrid concrete is diminished. As a result, it is expected that this will reduce the concrete's durability.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.211-216
• /
• 2003

Coated bars are protecting reinforcing bars from corrosion and enhancing durabilities of reinforced concrete structures are tested to evaluate corrosion protection properties. Tests are performed based on the relevant standards of ACI and ASTM, such as chemical resistance, salt water spray, salt crack test and chloride permeability test with the main variable of the coating thickness. Three type materials are tested by Polyethylene, epoxy and bare bar. Test results show good chemical protection property and chloride permeability. Polyethylene coated bar is good coating material than any other materials.