• 대한설비공학회지:설비저널
• /
• 제5권2호
• /
• pp.91-97
• /
• 1976

This study was concerned with performance of 2 types of black painted solar air heaters, one is finned type better, the other is mesh type. The performance test of heaters was made under the different operating conditions during winter season of December in Seoul area. It was analized and discussed by comparing the overall efficiency of 2 solar heaters at the same mass flow rate and ambient temperature. Experimental results show that finned type solar heater is better than mesh type from the point of view of design and heat removal efficiency. Finned-type solar air heater supplies hot air up to 30 degree centigrade above ambient temperature with an overall efficiency of 47 percent whilemesh type was 44 percent.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1624-1632
• /
• 2009

In this study, we introduce the design methodology of an optimized Interval Type-2 fuzzy controller. The fixed MF design of type-1 based FLC leads to the difficulty of rule-based control design for representing the linguistically uncertain expression. In the Type-2 FLC as the expanded type of Type-1 FLC, we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. Type-2 FLC has a robust characteristic in the unknown system with unspecific noise when compared with Type-1 FLC. Through computer simulation as well as practical experiment, we compare their performance by applying both the optimized Type-1 and Type-2 fuzzy cascade controllers to ball and beam system. To evaluate each controller performance, we consider controller characteristic parameters such as maximum overshoot, delay time, rise time, settling time and steady-state error.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.525-535
• /
• 1995

This study was designed to verify the clothing satisfaction according to product type (jacket vs. pantyhose) and consumer fashion involvement. Research problems were as following; 1. To identify a clothing satisfaction according to product type. 2. To discover which of satisfaction relevant variables has the most influence on clothing satisfaction. 3. To examine the relationship between expectations and discontinuations. 4. To examine the degree of influence of product type and consumer fashion involvement on expectations. The survey was carried out in Pulsar shopping area. The 104 subjects (51 for jacket, 53 for pantyhose) participated in the final analysis. The results of analysis were as following; 1. The main path of clothing satisfaction was that the product type -1 the expectations -1 the perceived performance (-1 the discontinuation) -1 the clothing satisfaction. Those relevant variables explained 62% of clothing satisfaction variance. The most powerful determinant was the perceived performance. 2. For jacket type, the influence of perceived performance appeared to be greater than that of the discontinuation. And the consumer fashion involvement affected the expectations and the discontinuation. 3. For pantyhose type, the consumer fashion involvement divan't affect the expectations. The influence of discontinuation was relatively higher than that of jacket type.

• 한국프랜차이즈경영연구
• /
• 제6권1호
• /
• pp.42-68
• /
• 2015

As franchise industry has grown, the role of a supervisor who is a contact point between franchisor and franchisees has become more vital to success of the business. This research, focusing on his/her specific role, explores communication type, leadership type, and followership type of the supervisor in relations with the organization, franchisor, and franchisees, respectively. Furthermore, we compared performance of franchises by the three types above through the franchise contract management leverage (FCML) which reflects business performance both qualitatively and quantitatively. According to the analysis on supervisors of a franchise business, 'Ganiyeok', the majority of supervisors' communication type were either supportive style or directive style. For the leadership type, team-type and impoverished-type leaders were the majority, while effective or passive followership appeared highest in followership type. In addition, supportive supervisors in communication style, team-type supervisors in leadership style, and effective supervisors in followership had highest FCML, while reflective and directive styles, impoverished style, and passive style had lowest FCML. Primary goal of a franchise business is stable profit generation. This study not only examined what characteristics supervisors need and which style is insufficient, but also proposed tailored solutions for each style. Thus, we confirmed that debates on franchise can be approached in perspective of both communication and business, and we further suggest diverse approaches on future franchise business.

• 한국경영과학회지
• /
• 제40권3호
• /
• pp.97-117
• /
• 2015

There has been a lack of research that has addressed firm performance associated with the mechanism among dependence, conflict and cooperation in the context of B2B relationships. Building on current knowledge regarding key constructs of dependence, conflict, and cooperation, the authors examine the primary assumption underlying firm performance and presents a process model of key constructs on firm performance using two moderators (relationship length and firm type). In so doing, a professional online research firm conducts panel survey and a total of 200 responses are used to test our proposed model. The results show that both conflict-cooperation and cooperation-firm performance linkages are significant, but other proposed links are insignificant. While the moderating effect of firm type is not significant, the dependence-performance link is moderated by relationship length, particularly in the stage of the initial relationships. These results has implications for a better understanding of B2B relationships from the initial stage to the sustainable stage.

• Computers and Concrete
• /
• 제17권4호
• /
• pp.499-521
• /
• 2016

In this paper, a probabilistic- and finite element-based approach to evaluate and predict the lifetime performance of reinforced concrete (RC) bridges undergoing various maintenance actions is proposed with the time-variant system reliability being utilized as a performance indicator. Depending on their structural state during the degradation process, the classical maintenance actions for RC bridges are firstly categorized into four types: Preventive type I, Preventive type II, Strengthening and Replacement. Preventive type I is used to delay the onset of steel corrosion, Preventive type II can suppress the corrosion process of reinforcing steel, Strengthening is the application of various maintenance materials to improve the structural performance and Replacement is performed to restore the individual components or overall structure to their original conditions. The quantitative influence of these maintenance types on structural performance is investigated and the respective analysis modules are written and inputted into the computer program. Accordingly, the time-variant system reliability can be calculated by the use of Monte Carlo simulations and the updated the program. Finally, an existing RC continuous bridge located in Shanghai, China, is used as an illustrative example and the lifetime structural performance with and without each of the maintenance types are discussed. It is felt that the proposed approach can be applied to various RC bridges with different structural configurations, construction methods and environmental conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.77-80
• /
• 2005

Recently the construction of high-rise hybrid type building is progressively increased as the social demands. It is significantly important factors such as economy, the safety of structure, and the flexibility of internal space. Therefore new hybrid structural system, using slim flat plate system, is also required to be attained the reduction of story height, the flexibility and efficient use of space. The most suitable structural system is ,with the economy and flexibility, flat plate system in high-rise hybrid type building. But it was focused in the seismic performance for high performance flat plate system in high-rise hybrid type building. Therefore, in the study, to develop the new flat-plate system with high ductile, durable, good performance for the applications. It was evaluated the seismic performance in the critical region of slab-column connection. And then high performance flat plate system, designed by the economy and safety, was developed as a new technique in the application of high-rise hybrid type building.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.499-505
• /
• 2004

A Propulsion System of the CRW(Canard Rotor Wing) type UAV(Unmanned Aerial Vehicle) was composed of the turbojet engine to generate the propulsive exhaust gas, and the duct system including straight bent ducts, tip-jet nozzles, a master valve and a variable main nozzle for three flight modes such as lift/landing mode, low speed transition flight mode and high speed forward flight mode. In this study, in order to operate safely the propulsion system, the dynamic Performance behavior of the system was modeled and simulated using the SIMULIN $K^{ }$, which is the user-friendly GUI type dynamic analysis tool provided by MATLA $B^{ }$. In the transient performance model, the inter-component volume model was used. The performance analysis using the developed models was performed at various flight condition, valve angle positions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the inlet temperature overshoot limitation as well as the compressor surge margin. Performance analysis results using the SIMULIN $K^{ }$ performance program were compared with them using the commercial program GSP.m GSP.

• 한국정보시스템학회지:정보시스템연구
• /
• 제13권2호
• /
• pp.225-240
• /
• 2004

The most critical problem of MIS evaluation is the lack of the systematic framework to cover various factors and viewpoints. To solve this problem, this study takes the multi-level and contingent approach to performance evaluation, composed of three levels: evaluating the contribution of MIS to an organization [strategy level]; evaluating the activities of MIS department or MIS function as an organizational sub-function through the overall MIS lifecycle [function level]; and evaluating the quality or productivity of the application systems as MIS outputs [system level]. Ideal MIS evaluation should include all three levels of the hierarchy with balanced importance. However, MIS evaluationcanbedividedintothreetypes,suchasstrategy-oriented, function-oriented and system-oriented evaluation, depending on the focus and emphasis of evaluation. The usage pattern of each evaluation type is analyzed according to contingent variables of MIS evaluation such as MIS maturity, information intensity and firm size, and top management's intent. It is also found that the firms of higher MIS maturity and top management's intent use the strategy-oriented evaluation type, and the firms with strategy-oriented evaluation type show a higher MIS performance. Further, MIS maturity and top management's intent show contingent effects between evaluation type and MIS performance. Some managerial implications can be drawn based on the results of the study. First, strategy-oriented evaluation of MIS is more important as many firms more often use information technology as a strategic weapon. Second, MIS performance varies with evaluation type. Therefore, the design of MIS evaluation framework should be done carefully in the strategic and managerial contexts. Third, firms are recommend to use a different evaluation type according to organizational characteristics such as MIS maturity and information intensity.

• 대한전자공학회논문지TC
• /
• 제39권3호
• /
• pp.125-131
• /
• 2002

본 논문에서는 직렬연접 길쌈부호의 새로운 연접방법을 제시하고 그 성능을 분석하였다. 제시된 직렬연접 길쌈부호에서는 외부부호의 정보비트와 패러티비트가 각각 인터리버와 역인터리버를 거쳐서 내부부호로 입력된다. 따라서 인터리버와 역인터리버의 크기는 입력프레임의 크기와 동일하다. 제안된 직렬연접 길쌈부호에서는 인터리버의 크기가 Benedetto 구조에 비하여 반으로 줄어들기 때문에 반복복호시 매번 거쳐야 하는 인터리버의 지연시간을 줄일 수 있다. 또한 제시된 구조에서는 다중화기와 역다중화기가 사용되지 않기 때문에 복호기의 복잡도가 Benedetto 구조보다 상대적으로 더 간단하다. 모의실험 결과 인터리버의 크기가 동일한 경우 제시된 직렬연접 길쌈부호의 성능이 Benedetto 구조의 성능보다 더 우수하였다. 또한 Eb/No가 증가할수록 제시된 구조와 Benedetto 구조의 성능차이가 더욱 증가하였다. 입력프레임의 크기가 동일한 경우에는 제시된 직렬연접 길쌈부호의 성능이 인터리버의 크기가 반으로 줄어듦에도 불구하고 Benedetto 구조와 거의 동일한 성능을 나타내었다.