• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.435-447
• /
• 2005

The 24th ITTC Specialists Committee on Stability in Waves is conducting an international benchmark study where numerical methods for the calculation of ship motion in damaged condition are compared on the basis of specified tests in order to assess the present state of the art in this field. The study is finished and some results are presented in this paper providing an initial insight into the status of damage models and numerical methods and a collective assessment of their performance. The preliminary analysis has shown that current methods are satisfactory, capturing the fundamental physical performance of damaged ships in specified conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.261-268
• /
• 2018

The use of electric cable was limited due to the installation time and large space as the increase of power demand and load quantity in side line. In order to solve these problems, the application of busway system which can supply the large current was increasing. But it was lack of methods of performance tests to evaluate the reliability and results of test for busway system. In this paper, we presented items to evaluate the reliability test for epoxy coated busway system with reference to IEC 61349-6. In addition, we proposed items to evaluate the reliability and long term life cycle test for the epoxy coated busway system. The combined acceleration deterioration test that reflects actual conditions of the survey as much as possible was conducted considering both thermal and electrical stresses. The deterioration condition was selected to satisfy fifty years life expectation and the insulation performance verification test of the busway system confirmed the long term life prediction. Furthermore, as test items for reliability assessment of compliance with the environment for the use of temperature, humidity and load current where busway system was installed, thermal overload test, water immersion test, cold shock temperature test and thermal cycle test were performed. And we examined changes in characteristics and abnormality after tests. From results, the test items presented to evaluate performance and reliability of the epoxy insulated busway system were confirmed to be appropriate in this paper, and the performance of the product was also confirmed to be excellent for reliability tests.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.55-65
• /
• 2017

PURPOSES : This study aimed to analyze the experimental and numerical behavior of warm mix asphalt pavement prepared using steel slag and RAP and to conduct economic analysis of pavement construction. METHODS : For developing high performance asphalt pavement, we performed three evaluations: fundamental analysis, experimental testing, and 3D finite element analysis. In particular, 3D finite element analysis was conducted on several pavement structures by adopting the results of experimental tests. RESULTS : Through the various evaluations, it was established that steel slag was effective for use as asphalt mixture aggregate. Moreover, asphalt mixture constituting steel slag and RAP demonstrated higher performance behavior compared with conventionally used asphalt mixture. Furthermore, based on the 3D FE modeling, we established that the developed asphalt pavement constituting steel slag and RAP can be utilized for thin layer pavement with comparable performance behavior. CONCLUSIONS :Warm mix asphalt pavement prepared using steel slag and RAP is more competitive and economic compared to hot-mix asphalt pavement. Moreover, it can be applied for preparing thin layer asphalt pavements with reasonable performance. The developed warm mix asphalt pavement prepared using steel slag and RAP can be an alternative pavement type with competitive performance based on the reasonable economic benefit it provides.

• The Journal of Korean Physical Therapy
• /
• v.28 no.4
• /
• pp.254-258
• /
• 2016

Purpose: This study was conducted to identify the effects of dual task training on balance and functional performance in high school soccer players with functional ankle instability. Methods: Twenty high school soccer players with functional ankle instability were randomly assigned to a single task training group and a dual task training group. One participant who did not participate regularly in the training was excluded. The single task training group (n=9) received balance training on an unstable surface. The dual task training group (n=10) received balance training on an unstable surface and had to catch thrown balls during the balance training. Both groups were trained for 4 weeks, 3 days a week. The balance and functional performance of both groups was measured before and after training. Balance was measured using an anterior-posterior and medio-lateral balance. Functional performance was measured based on a figure-of-8 hop test, up-down hop test, and a single hop test. All data were analyzed by repeated two-way ANOVA tests. Results: A time by group interaction effect was not observed in the medio-lateral balance test, figure-of-8 hop test, or single hop test (p>0.05). A time by group interaction effect was observed in the anterior-posterior balance and up-down hop test (p<0.05). Conclusion: These results suggest that dual task training improved balance and functional performance better than single task training for some items.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.2
• /
• pp.85-92
• /
• 2003

In this paper, we propose a method to evaluate performances of mobile personal robots. A set of performance measures is proposed and the corresponding evaluation methods are developed. Different from industrial manipulators, personal robots need to be evaluated with its mobility, navigation, task and intelligent performance in environments where human beings exist. The proposed performance measures are composed of measures for mobility including vibration, repeatability, path accuracy and so on, as well as measures for navigation performance including wall following, overcoming doorsill, obstacle avoidance and localization. But task and intelligent behavior performances such as cleaning capability and high-level decision-making are not considered in this paper. To measure the proposed performances through a series of tests, we designed a test environment and developed measurement systems including a 3D Laser tracking system, a vision monitoring system and a vibration measurement system. We measured the proposed performances with a mobile robot to show the result as an example. The developed systems, which are installed at Korea Agency for Technology and Standards, are going to be used for many robot companies in Korea.

• Journal of Home Health Care Nursing
• /
• v.26 no.2
• /
• pp.166-179
• /
• 2019

Purpose: The purpose of this study was to identify the job performance and educational needs, and recognition of professionalism among care workers, and to organize educational programs according to the priorities of care workers. Methods: The participants were 119 care workers who were working in long-term care facilities. Data were collected from May 31 to June 7, 2019 using self-report questionnaires. Collected data were analyzed using t-tests, ANOVA, and Spearman's Correlation Coefficients. Results: The performance aspects of the job were as follows: care for safety and infection-related, communication and leisure support, and excretion. The most demanded educational needs were in first-aid. Care workers had more than average professional recognition. Job performance and educational needs, and recognition of professionalism differed significantly according to several general characteristics. Conclusions: The educational needs of the areas with low frequency of job performance were high. First-aid is low in frequency, but it is important to cope with emergencies, so it is necessary to continue education. Also, there is a difference in recognition of professionalism according to the career. It will be necessary to develop individualized education programs to meet the needs of care workers.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.2
• /
• pp.221-229
• /
• 2019

Objectives: The purpose of this study was to confirm job satisfaction, job performance, and turnover intention according to dental hygienists' clinical assistance and preventive work. Methods: The collected data (N=380) were analyzed with independent t-tests and Pearson correlations using SPSS Statistics ver. 21.0 (IBM Co., Armonk, NY, USA). Results: The results indicated that the higher the overall job satisfaction of the dental hygienist, the higher their job performance and the lower their turnover intention (p<0.05). The results of the comparison of job satisfaction showed that preventive work was higher than dental hygienists' clinical assistance in all items except "I was pleased with work" (p<0.05). The results of the comparison of job performance showed that preventive work was higher than dental hygienists' clinical assistance in all items except "I have never complained, even if things go wrong" (p<0.05). The results of the comparison of turnover intention showed that clinical assistance was higher than dental hygienists' preventive work in all items (p<0.05). Conclusions: Our results demonstrate that job satisfaction, turnover intentions, and job performance have positive effects for preventive work. Therefore, dental clinics need to improve the actual environment so that dental hygienists can focus on preventive work.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.54-60
• /
• 2019

Background: Increasing the establishment of integrated management systems (IMSs) is done with the purpose of leaving traditional management methods and replacing them with modern management methods. Thus, the present study sought to analyze the events and investigate the impact of IMS on health and safety performance indices in an Iranian combined cycle power plants. Methods: This case study was conducted in 2012 in all units of the Yazd Combined Cycle Power Plant on accident victims before and after the implementation of IMS. For data analysis and prediction of indices after the implementation of IMS, descriptive statistics and Kolmogorov-Smirnov test, Chi-square, linear regression, and Cubic tests were conducted using SPSS software. Results: The number of people employed in the power plant in an 8-year period (2004-2011) was 1,189, and 287 cases of work-related accidents were recorded. The highest accident frequency rate and accident severity rate were in 2004 (32.65) and 2008 (209), respectively. Safe T-score reached to below -3 during 2010-2011. In addition, given the regression results, the relation between all predictor variables with outcomes was significant (p < 0.05), except for the variable $X^1$ belonging to the accident severity rate index. Conclusion: The implementation of safety programs especially that of IMS and its annual audits has had a significant impact on reducing accident indices and improving safety within the study period. Accordingly, health and safety management systems are appropriate tools for reducing accident rate, and the use of regression models and accident indices is also a suitable way for monitoring safety performance.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2016

PURPOSES : This study evaluated the field applicability and laboratory performance of glass fiber-reinforced asphalt (GFRA) mixtures. METHODS : The general hot-mix asphalt (HMA) and GFRA mixtures were paved in five sites, including three national highways, one express highway, and an arterial road, to evaluate field applicability and durability. The plant mixing and construction method for the GFRA were similar to those for the general HMA. The lab performances of the field samples were relatively compared through the mechanical measures from the Marshall stability, indirect tensile strength, and dynamic stability. The field performance was surveyed after a year. RESULTS : The lab tests verified the superior lab performances of the GFRA compared to the general HMA. The Marshall stability of the GFRA increased for about 128% of the general HMA. The indirect tensile strength of the GFRA was 115% greater than that of the general HMA. The dynamic stability of the GFRA resulted in 16,180 reps/mm, which indicated that high rut resistance may be expected. No noticeable defects, such as cracks or deformation, were observed for the GFRA sections after a year. CONCLUSIONS : The lab tests and field survey for the five GFRA sites resulted in superior performances compared to the general HMA. The relatively low-cost GFRA, which required no pre-processing procedures, such as polymer modification, may be a promising alternative to the polymer-modified asphalt mixtures. The long-term performance will be verified by the superior field durability of the GFRA in the near future.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.458-472
• /
• 1987

A heart supplies bloods of about 15, 000 liters to each human organ in a day. A normal function of heart valves is necessary to this act of heart. The disease of heart valve develops to a narrowness of a closure, resulting in an abnormal circulation of bloods. In an attempt to eliminate the affliction of heart valves, the operation method to repair with artificial heart valves has been developed and saved numerous patients over past 30 years. This replacement operation has been performed since early 1960`s in Korea, but all the artificial heart valves used are imported from abroad with very high costs until recent years. The artificial heart valve using pyrolytic carbon has been developed at KAIST, which was proved to be stable in the mechanical performance and durability. Therefore, the in viva performance of this valve was examined through animal tests. The artificial heart valves used in this study are tilting disc type valves, in which the disc were made of graphite coated with pyrolytic carbon and the cages were made of titanium. In viva testings of these valves were performed in 12 dogs, in which right ventriculo-pulmonary arterial [Croup I] or inter-aortic [Croup IV] valved conduit was implanted using polytetrafluoroethylene conduits containing KAIST valve and aortic valve [Group II] or pulmonary valve [Croup III] was replaced by a KAIST valve with a 21mm or 19mm tissue annulus diameter. In group I and II, pre-and post-operative transvalvular pressure gradient was measured and compared with other prosthetic valves. During post operative period laboratory examination was performed including hemoglobin, hematocrit, red cell count, white cell, lactic acid dehydrogenase and platelet. The eight surviving dogs were sacrificed and autopsy was performed at 2, 6, and 8 weeks. KAIST valve has low transvalvular gradient and relatively high orifice area. Average ventriculo-aortic peak systolic transvalvular gradient was 14 mmHg in 21 mm valve and 19 mmHg in 19 mm valve. The valve has slight intravascular hemolysis effect. Thrombogenic effect of low polishing quality and eddy currents around small orifice is high. The valve has vulnerability of disc movement. These animal tests suggest that the improvement of the heart valve design, surface polishing state and prescription methods.