• Title/Summary/Keyword: performance objective

Search Result 5,781, Processing Time 0.033 seconds

Influence of pH and Ionic Strength on Treatment of Radioactive Boric Acid Wastes by Forward Osmosis Membrane (정삼투막에 의한 붕산함유 방사성 폐액 처리를 위한 pH 및 이온강도 영향)

  • Choi, Hye-Min;Hwang, Doo-Seong;Lee, Kune-Woo;Moon, Jei-Kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.11 no.3
    • /
    • pp.193-198
    • /
    • 2013
  • In general, boron recovery of 40-90% could be achieved by Reverse Osmosis (RO) membranes in neutral pH condition. As an emerging technology, Forward Osmosis (FO) membrane has attracted growing interest in wastewater treatment and desalination. The objective of this study is to evaluate the possibility of the boron removal in radioactive liquid waste by FO. In this study, the performance of FO was investigated to remove boron in the simulated liquid waste as the factors such as pH, osmotic pressure, ionic strength of solution, etc. The pH of feed solution is a major operating parameter which strongly influences to the permeation of boron and more than 80% of boron content can be separated when conducted at pH values less than 7. The water flux is not influenced but the boron flux and permeation rate tends to decrease in the low salt concentration of 1,000 mg/L. The boron flux increases linearly, but the permeation ratio of reducing boron is nearly constant even with changes in the draw solution concentration.

Educational Practice Example of Information and Communications Technology: Measurement of Data Transfer Time for Concurrent Server Model (정보통신기술 실습사례: 병행서버모델의 데이터 전송시간 측정)

  • Son, Myung-Rak;Lee, Yong-Jin
    • 대한공업교육학회지
    • /
    • v.33 no.1
    • /
    • pp.265-281
    • /
    • 2008
  • The objective of this study is to show practice example let student experience about concurrent servers based multi-processes and multi-thread among the principles of data communication in ICT(information and communications technology). For this, we first implement multi-process server(fork server) and multi-thread server(thread server), and multi-thread client(thread client), Secondly, for experimental environment, we developed small ethernet networks and measure data transfer time with relation to the number of users. Experimental results show that mean transfer time of thread server is less than that of fork server by 20~61 % on average. Furthermore, it is found that the difference of data transfer time between fork server and thread server is proportional to that of the number of users. Main reason of performance difference dues to the difference between process forking time and thread creation time. We can also find that context switching for process and thread affects the load of web server. Our presentation and experimental results can be applied to used as the educational practice materials with which student can experience data communication principles.

Speed Control of Marine Gas Turbine Engine using Nonlinear PID Controller (비선형 PID 제어기를 이용한 선박용 가스터빈 엔진의 속도 제어)

  • Lee, Yun-Hyung;So, Myung-Ok
    • Journal of Navigation and Port Research
    • /
    • v.39 no.6
    • /
    • pp.457-463
    • /
    • 2015
  • A gas turbine engine plays an important role as a prime mover that is used in the marine transportation field as well as the space/aviation and power plant fields. However, it has a complicated structure and there is a time delay element in the combustion process. Therefore, an elaborate mathematical model needs to be developed to control a gas turbine engine. In this study, a modeling technique for a gas generator, a PLA actuator, and a metering valve, which are major components of a gas turbine engine, is explained. In addition, sub-models are obtained at several operating points in a steady state based on the trial running data of a gas turbine engine, and a method for controlling the engine speed is proposed by designing an NPID controller for each sub-model. The proposed NPID controller uses three kinds of gains that are implemented with a nonlinear function. The parameters of the NPID controller are tuned using real-coded genetic algorithms in terms of minimizing the objective function. The validity of the proposed method is examined by applying to a gas turbine engine and by conducting a simulation.

Study of the Acceptance of Interested Parties(Auditor /Auditee) in the Information System Audit Technologies Based Technology Acceptance Model(TAM) (정보시스템 감리기술에 대해 이해관계자(감리인/피감리인)의 수용에 관한 연구 -기술수용모델(TAM)을 중심으로-)

  • Kim, Hak-Joon;Jeon, Soon-Cheon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.2
    • /
    • pp.1403-1413
    • /
    • 2015
  • An information System Audit by the recognition of a problem and suggestions for solutions for overall matters about constructing and managing information systems is needed in order to contribute to the improvement of an information system's quality and improving the performance of projects. In reality, however, the general cognition is that audit is biased by subjective opinions. For this, an auditor needs to measure the level of recognition of the usability and convenience of the technologies of automating audit by applying TAM in the information system audit, and to analyze the relationship with recognition and availability of the interested parties for the technology (tool) of the audit. By the hypothesis verification result, an auditor needs to present objective corroborative facts that back up the level of recognition and usability for the information technology in the field of audit. This study verified that the phenomenon of technology application can be explained and predicted by applying TAM in the field of audit. Through an empirical study of the recognition level of audit and contractor, the developer suggests that the audit plan stage is similar to the audit corrective action stage, but the audit action stage is different from the audit review stage. This research can verify the audit technology preferred for the availability and intention of use and usability.

Numerical study on the thermal performance characteristics of the stack system for FCEV (연료전지 자동차용 스택 시스템의 열적 성능 특성에 관한 수치적 연구)

  • Lee, Ho-Seong;Lee, Moo-Yeon;Won, Jong-Phil
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.6
    • /
    • pp.3708-3713
    • /
    • 2015
  • The objective of this study is to numerically investigate the heat transfer rate for evaluating the thermal performances of the stack thermal system using the commercial software. In order to perform this, the cooling performances of the stack system for fuel cell electric vehicle were tested under both driving road conditions including the general driving road and uphill driving road and operating conditions with and without of the air conditioning system. The heat transfer rate of the stack radiator for the stack system was increased with the increase of the inlet air flow velocity. The heat transfer rate of the stack radiator increased by 105.3% at the coolant flow rate of 20 l/min and 221.3% at the coolant flow rate of 120 l/min with the increase of the air flow velocity from 2 m/s to 10 m/s. $9.45^{\circ}C$ of inlet coolant temperature of the stack radiator at the severe driving condition of the slope of 8% and velocity of 50 km/h showed higher 85.3% than $5.1^{\circ}C$ of inlet coolant temperature at the general driving condition of the slope of 0% and velocity of 120 km/h. In addition, as the fuel cell electric vehicle with the air conditioning system operation was driving under severe uphill driving condition, the radiator coolant temperature for a stable stack operation could be exceeded over $70^{\circ}C$.

Kinematic Characteristics Based on Proficiency In Geoduepyeopchagi in Taekwondo Poomsae Koryo

  • So, Jae Moo;Kang, Sung-Sun;Hong, AhReum;Jung, Jong Min;Kim, Jai Jeong
    • Korean Journal of Applied Biomechanics
    • /
    • v.26 no.4
    • /
    • pp.343-351
    • /
    • 2016
  • Objective: The purpose of this study was to help improve game performance and provide preliminary data to enhance the efficiency of the kick and stability of the support foot by comparing the kinematic characteristics of the repeated side kick (geodeupyeopchagi) in poomsaeKoryo between expert and non-expert groups. Method: The subjects were divided into 2 groups according to proficiency in Taekwondo, an expert group and a non-expert group (n = 7 in each group), to observe the repeated side-kick technique. Four video cameras were set at a speed of 60 frames/sec and exposure time of 1/500 sec to measure the kinematic factors of the 2 groups. The Kwon3D XPprogramas used to collect and analyze three-dimensional spatial coordinates. Ground reaction force data were obtained through a force plate with a 1.200-Hz frequency. An independent samplesttest was performed, and statistical significance was defined as .05. The SPSS 18.0 software was used to calculate the mean and standard deviation of the kinematic factors and to identify the difference between the experts and non-experts. Results: The angular displacement of the hip joint in both the expert and non-expert groups showed statistical significance on E1 and E4 of the left support foot and E5 of the right foot (p<.05). The angle displacement of the knee joint in both groups showed statistical significance on E4 of the left support foot, and E1 and E2 of the right foot (p<.05). The angular velocity of the lower leg in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 and E6 of the right foot (p<.05). The angular velocity of the foot in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 of the right foot (p<.05). The vertical ground reaction force in both groups showed statistical significance on E2 (p<.05). The center of pressure in all directions in both groups showed statistical significance (p<.5). Conclusion: While performing the repeated side kick (geodeupyeopchagi), the experts maintainedconsistency and stability of the angle of the support leg while the kick foot moved high and fast. On the other hand, the angle of the support foot of non-experts appeared inconsistent, and the kick foot was raised, relying on the support leg, resulting in unstable and inaccurate movement.

A Field Study on the Enhancement of Landfarming Performance Using Oil-degradable Microbes Adapted to Various Temperature Range (생장 온도 범위별 최적의 유류분해 미생물을 이용한 토양경작 정화기술의 효율성 제고에 관한 현장 적용성 연구)

  • Yu, Jae-Bong;Kim, Jeong-Ho;Kim, Guk-Jin;Oh, Seung-Taek;Lee, Cheol-Hyo;Park, I-Kyong;Chang, Yoon-Young
    • Journal of Soil and Groundwater Environment
    • /
    • v.14 no.5
    • /
    • pp.10-17
    • /
    • 2009
  • Bioremediation has been applied as a proven technology in remediation of TPH contaminated soil. However, the efficiency of biodegradation is dependent on temperature as microbial activity is depressed at lower temperature ranges ($30^{\circ}C{\sim}80^{\circ}C$). The objective of this study was to develop microbes with enhanced activities at the stated temperature conditions and to evaluate the remediation effectiveness of these microbes in TPH contaminated soil. Experiments were conducted to isolate hydrocarbon degradable microbial consortia cultured under different temperature conditions. It was found that there were 5 strains of mesophilic ($30^{\circ}C$) and 3 strains of psychrophilic ($80^{\circ}C$) microbes. The TPH concentration was reduced from 4,044 mg/kg to 1,084 mg/kg, (73.2%) in 10 days by using mesophilic microbial consortia and from 5,427 mg/kg to 1,756 (67.6%) in 50 days with psychrophilic microbial consortia in laboratory cultures under controlled conditions. This rate determination excluded physical degradation such as venting and dilution. A field study was then performed to examine the feasibility of applying these microbes in the land-farming process. In this case, 87.1% of the 2,560 mg/kg TPH contaminated soil was degraded in 56 days. The biodegradation rate coefficient (k) was $0.0374\;day^{-1}$. Findings of this study provide viable options for applying microbes for bioremediation of TPH in lower temperature conditions.

Evaluation of Regional Wall Motion by Phase Analysis of Radionuclide Cardiac Blood Pool Scintigrams in Coronary Artery Disease Patients (관상동맥질환 환자에서 방사성동위원소 위상분석에 의한 심근 국소 운동 평가)

  • Yi, Gang-Wook;Chung, June-Key;Oh, Byeong-Hui;Park, Young-Bae;Lee, Myung-Chul;Lee, Young-Woo;Koh, Chang-Soon
    • The Korean Journal of Nuclear Medicine
    • /
    • v.21 no.2
    • /
    • pp.167-174
    • /
    • 1987
  • Among noninvasive approaches for the evaluation of left ventricular performance, radionuclide ventriculography (RVG) has been shown to be of particular values. Phase analysis, recently introduced as more objective means for evaluating the temporal sequence of systolic ventricular wall motion than cine image of RVG comprises a pixel by pixel Fourier transformation of the time activity curve of a multiple gated acquisition equilibrium blood pool study. To examine the regional wall motion of ventricles in myocardial infarctions, we evaluated the phase image and histogram constructed for each ventricle by total phase angle range and full width of half maximum (FWHM). This study consisted of 7 normal subjects and 23 subjects with acute myocardial infarction. Contrast ventriculography and coronary angiography was performed in all partients with myocardial infarction. And we compared the result of phase analysis with cine image of RVG and examined the interrelationship between phase analysis and contrast ventriculography with coronary angiography. The results were as follows; 1) The total phase angle range and FWHM of LV phase histogram in myocardial infarction ($86^{\circ}\;and\;32^{\circ}$, repectively) were wider than those in normal control ($38^{\circ}\;and\;18^{\circ}$, respectively p<0.01). 2) RV phase angle range and FWHM in patients with right coronary artery (RCA) occlusion ($79^{\circ}\;and\;37^{\circ}$, respectively) were wider than those in normal control ($39^{\circ}\;and\;18^{\circ}$, respectively p<0.001) and the patients without RCA occlusion ($52^{\circ}\;and\;19^{\circ}$, respectively p<0.01). 3) Phase analysis was more sensitive (95%) than cine image of RVG (70%) for the detection of regional wall motion abnormality of LV.

  • PDF

Study on the Performance of Information Search Process in term of Attributes of Apps in Appstore and Buyer's Innovativeness (앱스토어 구매자의 혁신성과 앱의 속성에 따른 정보탐색 성과에 관한 연구)

  • Baek, Sung-Wook;Ahn, Hyo-Young;Lee, Zoon-Ky
    • Journal of Internet Computing and Services
    • /
    • v.13 no.4
    • /
    • pp.103-119
    • /
    • 2012
  • In this paper, we conducted for information search process of users, who have experience to buy paid-application in Appstore, to find out difference of information searching efforts and information sources, reliance on the information in term of attributes of Apps and buyes' innovativenss. As a result, Innovative buyers take a effort to search various information source but they get help buying decision-making supports by own their efforts like searching in category. On the other hand, non-Innovative buyers who search informtion less than Innovative buyers, get information like recommendation from friend and Apps, then they keep those information help buying decision-making supports highly. Besides buyers of Utility Apps search on objective information sources mainly, but those sources have influence on buying decision-making supports. On the other side buyers of Enjoyment Apps consider reliance on the information more than information searching efforts to buying decision-making supports as they get information source like popularity. This research suggests operators of Appstore and app developers how to promote their Apps to users.

A Comparative Study of the Assay Methods Used to Quantify Fermentable Sugar in Makgeolli Sul-dut (막걸리 술덧의 발효성 당 분석방법 비교 연구)

  • Kim, Byong-Soo;Kim, Gye-Won;Shim, Jae-Yong
    • Korean Journal of Food Science and Technology
    • /
    • v.48 no.1
    • /
    • pp.48-53
    • /
    • 2016
  • The objective of this study was to evaluate the accuracy and efficiency of different methods used for the fermentable sugar assay in the production of Makgeolli sul-dut. In the initial stage of fermentation, Ipguk treatment produced a higher alcohol content compared to the Nuruk treatment. However, the alcohol content was not significantly different between the two starters at the final stage of fermentation. Acidity in the Ipguk treatment was higher than that of Nuruk throughout the fermentation period. After analyzing the fermentable sugars using dinitrosalicylic acid (DNS), Fehling's method, refractometer, glucose kit, and high performance liquid chromatography (HPLC), it was confirmed that the HPLC method was the most accurate for fermentable sugar quantification. In both types of starters, DNS and Fehling's methods showed results comparable to HPLC in terms of fermentable sugar content, while the glucose kit and refractometer analyses showed relatively large discrepancies, indicating that the Fehling's method could also be effective for the analysis of fermentable sugars in the manufacture of Makgeolli.