• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.45-52
• /
• 2024

Objective: The purpose of this study was to measure the morphological characteristics of the foot and biomechanical variables of the lower extremity joints during vertical jump and investigate the relationship between foot morphology and biomechanics of vertical jump. Method: 24 men in their 20s (age: 22.42 ± 1.41 yrs, height: 173.37 ± 4.61 cm, weight: 72.02 ± 6.21 kg, foot length: 251.70 ± 8.68 mm) participated in the study. Morphological characteristics of the foot included the length of the first toe, the length of the second toe, and the horizontal length from the center of ankle joint to the achilles tendon (Plantar Flexion Moment Arm [PFMA]). Biomechanical variables were measured for plantar flexor strength of the ankle joint and peak angular velocity, moment, and power of the lower extremity joint during vertical jump. Results: There was a significant correlation between the length of the first toe and plantar flexion strength at 30°/s [r=.440, p=.016], the angular velocity of the metatarsophalangeal [MTP] joint [r=-.369, p=.038] while significant correlations between PFMA and the angular velocities of the knee joint [r=.369, p=.038] and ankle joint [r=.420, p=.021] were found. There were also significant correlations between the length of the first toe and the maximum moment of the hip joint [r=.379, p=.034], and the length of the second toe and the power of the hip joint [r=-.391, p=.029]. Finally, significant correlations between PFMA and the power of the ankle joint [r=.424, p=.019] and MTP joint [r=.367, p=.039] were found. Conclusion: Based on the results of this study, the length of the toe and PFMA would be related to the function of the lower extremity joint. Therefore, this should be considered when designing the functional structure of a shoe. Furthermore, this relationship can be applied to intensive training for the plantar flexors and toe flexors to improve power in athletic performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.57-64
• /
• 2008

Generally, organic paint on steel towers can guarantee durability in normal condition but occasionally shows its deterioration on the power line tower and electric power facilities, exposed to light(ultra violet) or heat. The objective of this study is to develope the inorganic paint material based on fluid silicic acid for steel electric power facilities. For the purpose, optimal mixture proportion is derived through 6 preliminary test and, additionally physical and durability performance test are carried out for selected specimens. The performances of developed organic paint material is similar to those of organic paint material. If resistance to chemical attack is improved, the developed inorganic paint is evaluated to replace the organic paint and obtain wide application.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.101-108
• /
• 2008

The primary objective of this research is a study on the pullout bond characteristics of untensioned prestressing strand in concrete. The bond characteristics of untensioned prestressing strand in concrete differs from that of deformed reinforcing bar. In order to use and design untensioned prestressing strand as deformed reinforcing bar, a study for bond characteristics of the untensioned prestressing strand was progressed. Major test variables are embedment length ($10d_b{\sim}60d_b$), concrete cover (45mm, 70mm, 100m) and diameter of strands. (12.7mm : SWPC7, 9.3mm : SWPC7A) As a results, these showed that average bond stress was decreased as a growing the embedment length, and then showed that the bond performance of untensioned prestressing strand was improved if embedment length was above 60$60d_b$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.209-216
• /
• 2009

Flexible frames on their own offer little resistance to lateral forces, resulting often in large deflections and rotations at the joints. On the other hand, walls subjected to lateral loads fail mainly in shear at relatively small displacements. Therefore, when the nonductile frames and wall act together, the combined action of the composite system differs significantly from that of the frame or wall alone. The objective of the study is to evaluate seismic response of infill walls with notched midsection. Reinforcement detail of wall was main variable in the experiment. Also SHCC was used in order to prevent damage concentration into notched midsection of walls. Test results, SHCC infill walls show the multiple crack patterns as expected. However, PIW-ND specimen exhibits less story drift, stiffness and energy dissipation capacity than those of PIW-NC specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.149-160
• /
• 2008

In this study, the research was carried out on how to identify the modal parameter by acquiring the output response of the structure only through the smart sensor system. The objective of this research is to verify the performance and the on-site adaptability of the smart sensor system that have been actively researched as the advanced measuring system so far. Smart Sensor System was developed so that the real-time dynamic measurement can be performed by means of MEMS-type accelerated sensor, 8 bit CPU, wireless MODEM. In the modal parameter identification test, random excitation was added to the cantilever beam, and then the response of the structure was obtained using the smart sensor system and the wire measurement system respectively. In analyzing the data, modal parameter was identified using NExT & ERA algorithm. Furthermore, the optimal measurement location was selected through EOT algorithm in order to obtain the qualified output response. Result of the test, it was possible to verify the on-site applicability of the smart sensor.

• Journal of Veterinary Science
• /
• v.25 no.4
• /
• pp.58.1-58.8
• /
• 2024

Importance: Over the past decade, catfish farming has increased in Southeast Asia. However, there has been no existing for pharmacokinetic data in the hybrid catfish (Clarias macrocephalus x C. gariepinus). Objective: This study was designed to evaluate the pharmacokinetic characteristics of oxytetracycline (OTC) in the hybrid catfish, following single intravascular (IV) or oral (PO) administration at a single dosage of 50 mg/kg body weight (BW). Methods: In total, 140 catfish (each about 100-120 g BW) were divided into two groups (n = 70). Blood samples (0.6-0.8 mL) were collected from ventral caudal vein at pre-assigned times up to 144 h (sparse samples design). OTC plasma concentrations were analyzed using high-performance liquid chromatography-photodiode array detector. Results: The pharmacokinetic parameter of OTC was evaluated using a non-compartment model. OTC plasma concentrations were detectable for up to 144 and 120 h after IV and PO, respectively. The elimination half-life value of OTC was long with slow clearance after IV administration in hybrid catfish. The average maximum concentration value of OTC was 2.72 ㎍/mL with a time at the maximum concentration of 8 h. The absolute PO bioavailability was low (2.47%). Conclusions and Relevance: These results showed that PO administration of OTC at a dosage of 50 mg/kg BW was unlikely to be effective for clinical use in catfish. The pharmacodynamic properties and clinical efficacy of OTC after multiple medicated feed are warranted.

• Physical Therapy Rehabilitation Science
• /
• v.13 no.2
• /
• pp.223-230
• /
• 2024

Objective: In this study, we compared the key indices of isokinetic tests for knee joint extension and flexion according to the presence or absence of pain in elite athletes with past knee and thigh injuries. Design: Crossed-sectional study Methods: This study was conducted on 33 elite athletes. The elite athletes who participated in this study were divided into a group with pain and a group without pain due to past knee and thigh injuries. The subjects in each group performed an isokinetic muscle strength test for knee joint extension and flexion. After the isokinetic muscle strength test, the main indices of the isokinetic test were compared between the pain group and the non-pain group. Results: In the comparison of the pain group and the non-pain group for 60°/s knee flexion and extension in elite athletes, there was a significant difference only in the torque max average/kg for knee extension. However, there was no statistically significant difference in all other variables. The comparison of the pain group and the non-pain group for 240°/s also showed a significant difference in the torque max average/kg for knee extension, and there was no statistically significant difference in all other variables. Conclusions: In subjects who have experienced previous knee or thigh injuries and have mild pain during strong isokinetic strength tests, torque average/kg is affected, but other strength variables are not affected. Therefore, it would be good to consider this aspect and use it as a basis for testing and training elite athletes.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.129-134
• /
• 2024

Purpose: Preoperative planning has become essential in performance of total hip arthroplasty (THA). However, data regarding the effect of the planner's experience on the accuracy of digital preoperative planning is limited. The objective of this study was to assess the accuracy of digital templating in THA based on the surgeon's experience. Materials and Methods: A retrospective study was conducted. An analysis of 98 anteroposterior pelvic radiographs, which were individually templated by four surgeons (two hip surgeons and two orthopaedic residents) using TraumaCad^® digital planning, was performed. A comparison of preoperatively planned sizes with implanted sizes was performed to evaluate the accuracy of predicting component size. The results of preoperative planning performed by hip surgeons and orthopaedic residents were compared for testing of the planner's experience. Results: Femoral stem was precisely predicted in 32.4% of cases, acetabular component in 40.3%, and femoral offset in 76.7%. Prediction of cup size showed greater accuracy than femoral size among all observers. No differences in any variable were observed among the four groups (acetabular cup P=0.07, femoral stem P=0.82, femoral offset P=0.06). All measurements showed good reliability (intraclass correlation coefficient [ICC] acetabular cup: 0.76, ICC femoral stem: 0.79). Conclusion: The results of this study might suggest that even though a surgeon's experience supports improved precision during the planning stage, it should not be restricted only to surgeons with a high level of experience. We consider preoperative planning an essential part of the surgery, which should be included in training for orthopaedics residents.

• Journal of Animal Science and Technology
• /
• v.66 no.3
• /
• pp.567-576
• /
• 2024

Subclinical ketosis (SCK) is a prevalent metabolic disorder that occurs during the transition to lactation period. It is defined as a high blood concentration of ketone bodies (beta-hydroxybutyric acid f ≥ 1.2 mmol/L) within the first few weeks of lactation, and often presents without clinical signs. SCK is mainly caused by negative energy balance (NEB). The objective of this study is to identify single nucleotide polymorphisms (SNPs) associated with SCK using genome-wide association studies (GWAS), and to predict the biological functions of proximal genes using gene-set enrichment analysis (GSEA). Blood samples were collected from 112 Holstein cows between 5 and 18 days postpartum to determine the incidence of SCK. Genomic DNA extracted from both SCK and healthy cows was examined using the Illumina Bovine SNP50K BeadChip for genotyping. GWAS revealed 194 putative SNPs and 163 genes associated with those SNPs. Additionally, GSEA showed that the genes retrieved by Database for Annotation, Visualization, and Integrated Discovery (DAVID) belonged to calcium signaling, starch and sucrose, immune network, and metabolic pathways. Furthermore, the proximal genes were found to be related to germ cell and early embryo development. In summary, this study proposes several feasible SNPs and genes associated with SCK through GWAS and GSEA. These candidates can be utilized in selective breeding programs to reduce the genetic risk for SCK and subfertility in high-performance dairy cows.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.57-64
• /
• 2024

The introduction of Smart Factories has transformed manufacturing towards more objective and efficient line management. However, most companies are not effectively utilizing the vast amount of sensor data collected every second. This study aims to use this data to predict product quality and manage production processes efficiently. Due to security issues, specific sensor data could not be verified, so semiconductor process-related training data from the "SAMSUNG SDS Brightics AI" site was used. Data preprocessing, including removing missing values, outliers, scaling, and feature elimination, was crucial for optimal sensor data. Oversampling was used to balance the imbalanced training dataset. The SVM (rbf) model achieved high performance (Accuracy: 97.07%, GM: 96.61%), surpassing the MLP model implemented by "SAMSUNG SDS Brightics AI". This research can be applied to various topics, such as predicting component lifecycles and process conditions.