• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1030-1036
• /
• 2006

The rapid proliferation of wireless networks and mobile computing applications has changed the landscape of network security. Anomaly detection is a pattern recognition task whose goal is to report the occurrence of abnormal or unknown behavior in a given system being monitored. This paper presents an efficient rough set based anomaly detection method that can effectively identify a group of especially harmful internal masqueraders in cellular mobile networks. Our scheme uses the trace data of wireless application layer by a user as feature value. Based on the feature values, the use pattern of a mobile's user can be captured by rough sets, and the abnormal behavior of the mobile can be also detected effectively by applying a roughness membership function considering weighted feature values. The performance of our scheme is evaluated by a simulation. Simulation results demonstrate that the anomalies are well detected by the method that assigns different weighted values to feature attributes depending on importance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1142-1147
• /
• 2015

As a method to increase the scalability and efficiency of wireless sensor networks, a scheme to construct networks hierarchically has received considerable attention among researchers. Researches on the methods to construct wireless networks hierarchically have been conducted focusing on how to select nodes such that they constitute a backbone network of wireless network. Nodes comprising the backbone network should be connected themselves and can cover other remaining nodes. A problem to find the minimum number of nodes which satisfy these conditions is known as the minimum connected dominating set (MCDS) problem. The MCDS problem is NP-hard, therefore there is no efficient algorithm which guarantee the optimal solutions for this problem at present. In this paper, we propose a novel multi-start local search algorithm to solve the MCDS problem efficiently. For the performance evaluation of the proposed method, we conduct extensive experiments and report the results.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.293-303
• /
• 2018

Monitoring is the act of collecting and analyzing accurate engineering information using various methods and instruments. The purposes of the monitoring are design verification, construction management, quality control, safety management, and diagnose of structure etc.. The diagnose evaluation of the geotechnical structures corresponds to the confirmation of the structural performance. It is aimed to judge the soundness of geotechnical structures considering the degree of damage due to the environmental change and elapsed time. Recently, microseismicity, which is widely known in Korea, can be used for safety management and diagnoses of structure as it detects the micro-damage without disturbance of the structure. This report provides guideline on the procedure for assessing an underground oil storage cavern using microseismic monitoring techniques. Guidelines cover the selection of monitoring systems, sensor array, sensor installation and operation of systems, and interpretation.

• Journal of Educational Research in Mathematics
• /
• v.12 no.1
• /
• pp.145-162
• /
• 2002

In this study, on the basis of the seventh national mathematics curriculum, the achievement standards were developed to specify the objectives and contents of teaching-learning and the assessment standards were also developed to differentiate students' levels of achievement at school mathematics. The achievement standards were developed on the following guidelines; 1) to present the minimum standards based on the national curriculum, 2) to develop the standards based on the order of curriculum, 3) to suggest the minimum but ultimate achievement target, 4) to comprise not only of the intellectual but also of psychological spheres such as knowledge, function, attitude, aptitude, etc., and 5) to suggest the standards comprehensively and concretely. The standards were developed on the basis of the middle areas of contents of the curriculum in order not to be too comprehensive, nor to be too detailed. Learning activities, on the other hand, were provided for the assistance of instructions with emphasis on creativity rather than on the routine instruction. The assessment standards were established based on the following principles; 1) to establish the assessment methods, contents, and situations which are to be used for assessment, 2) to establish the criteria of classifying the assessed into the upper, intermediate and lower levels, 3) to develop the assessment standards in a proportionate balance to achievement standards, 4) to establish the intermediate level as a standard, and 5) to establish the minimum level in the contents, concepts, values and attitudes of basic learning. This study also suggested the exemplary test items including short-answer and open-ended questions while putting emphasis on students' real performance to increase their ability in solving problems rather than in calculating. In addition to the test items, it introduced the grading system developed to grade the items with concrete guidelines and to report students' achievement on doing mathematics.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.11
• /
• pp.1129-1137
• /
• 2013

We report a centerless grinding machine which can perform multi-function with 600 mm wide grinding wheels. By increasing manufacturing area, long workpiece such as camshaft and steering shaft, is allowed to grind more quickly, compared with cylindrical grinding system. In this paper, the design of centerless grinding machine puts emphasis on symmetry to exploit the thermal stability. Results of finite element analysis shows that the difference of the structural deflection in the front and rear guideways is less than $1.5{\mu}m$ due to symmetric design. The difference is less than $3.0{\mu}m$, even though the thermal deformation is considered. According to the performance evaluation, the radial error motion of the G/W spindle, which is measured by applying Donaldson Ball Reversal, is about 1.1${\mu}m$. The yaw error of the G/W slide is improved from 2.1 arcsec to 0.5 arcsec by readjusting the slide preload and ball screw.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.619-623
• /
• 2018

Due to the development of society, the demand for electric power has increased and the quality control of electric power has become an important issue. In order to efficiently perform such power management, we propose a DSP based power measurement system for multi-wire power measurement. Since the conventional power measurement system can measure only the power of one line, a power quality measurement device is required for each line in order to measure the power quality of the individual line. Respectively. The system proposed in this paper proposes a system capable of real-time measurement of power quality at up to 12 points using digital signal processing algorithm, and the prototype based on this system was evaluated through the official test report of Korea Electrotechnology Research Institute. As a result of the performance test, it was evaluated that the error range is excellent at ${\pm}0.3%$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.270-276
• /
• 2005

This study was conducted to examine whether a specific synthetic metalworking fluid (MWF), "A", in use for 10 months without replacement, displayed microbial resistance and to identify the additives associated with the control of microbial growth. Three synthetic MWF products ("A", "B", and "C") were studied every week for two months. Microbial deterioration of the fluids was assessed through evaluation by endotoxin, bacteria and fungi levels in the MWFs. In addition, formaldehyde, boron, ethanolamine, and copper levels were also studied to determine whether they influence microbial growth in water-based MWFs. Throughout the entire study in the sump where MWF "A" was used, bacteria counts were lower than 103 CFU/mL, and endotoxins never exceeded 103 EU/mL. These levels were significantly lower than levels observed in sumps badly deteriorated with microbes. Boron levels in MWF "A" ranged from 91.7 to 129.6 ppm, which was significantly higher than boron levels found in other MWF products. The total level of ethanolamine (EA) in MWF "A" ranged from 35,595 to 57,857 ppm (average 40,903 ppm), which was over ten times higher than that found in other MWFs. Monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA) concentrations in MWF "A" were also significantly higher than seen in other MWFs. However, although EA and boron might improve anti-microbial performance, their abuse can pose a serious risk to workers who handle MWFs. From an industrial hygiene perspective, our study results stress that the positive synergistic effect of boron and EA in reducing microbial activity in MWF must be balanced with the potentially negative health effects of such additives. Our study also addresses the disadvantage of failing to comprehensively report MWF additives on Material Safety Data Sheets (MSDS). Future research in MWF formulation is needed to find the best level of EA and boron for achieving optimal synergistic anti-microbial effects while minimizing employee health hazards.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.6
• /
• pp.662-667
• /
• 2014

The purpose of this clinical study is to develop structured clinical trial protocol and guideline for improvement of safety, useful and effective of pulse diagnosis devices. As a first step, papers on pulse diagnosis and pulse diagnosis devices from 2001 and 2013 were systematically reviewed. In the next step, we have collected the opinions from the specialists, companies, and statistician in pulse diagnosis to evaluate the current condition, the state and problem of domestic clinical trial cases of pulse diagnosis device. And we have to created protocol and case report form (CRF) in regards to site condition and characteristics of pulse diagnosis devices, and showed the guideline of eligibility criteria, operation process, investigation items, evaluation items and so on. This clinical protocol will become a basic information for a researcher in designing or performing a clinical study of pulse diagnosis devices, and be used as a useful material during acquisition of good clinical data. Furthermore, we hope to enhance the invigoration of pulse diagnosis clinical trials and the performance improvement of pulse diagnosis devices.

• Journal of Engineering Education Research
• /
• v.19 no.5
• /
• pp.35-47
• /
• 2016

This study analyzed outcomes of CAC(Computing Accreditation Committee) program individually applied in the field of computing engineering since 2007, and draw improvements. Literature review through academic journals, survey research and the FGI(Focus Group Interview) were used to accomplish objectives of the study. In addition, the survey research and FGI were done for professors. For the survey research, nationally 20 out of 44 universities which operates the CAC program were investigated, and sample universities were considered by region. FGI was done to analyze the performance and problems of CAC in more detail for 6 experts. Results of the study were follows as; first, CAC program was activated through the Seoul Accord activation support business by government. Second, BSM(Basic Science and Math), engineering major and engineering design education have been strengthened compared with before and after of CAC introduction in the computing engineering field. Third, soft skills needed for students in the college of engineering have been organized in the professional general curriculum, and professors aware of improvement of ability of the students for the skills. The degree of satisfaction for the CAC program has been examined as normal level, but improvement of educational system and the overall quality enhancement of computing engineering education were affected by CAC program. Nonetheless of positive results of CAC program, incentive system for certification program graduates, the expansion of the autonomy of the department, reduction in the amount of self-evaluation report, and support of administrative human resources were suggested for taking root successfully of CAC program.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.553-563
• /
• 2014

Objective: The purpose of this study was to evaluate the effect of gender (male, female) and grip spans (45, 50, 60, 70, 80mm) on total grip strength, resultant force, finger force and subjective discomfort rating. Background: In order to prevent musculoskeletal disorders, studies of hand tools need to be preceded based on grip strength, finger force, and subjective discomfort rating. However, experimental apparatus using tools such as pliers that reflect the actual work place was almost non-existent. Method: Fifty-Two (26 males and 26 females) participants were recruited from the student population. In this study, a pair of revised pliers, which can change grip span from 45 to 80mm was applied to estimate total grip strength, resultant force and individual finger forces. All participants were asked to exert a maximum grip force with three repetitions, and to report the subjective discomfort rating for five grip spans of pliers (45, 50, 60, 70, 80mm). Results: There were significant differences of total grip strength, resultant force, individual finger forces and subjective discomfort rating according to grip span. The lowest total grip strength was obtained from the grip span of 80mm for both genders. For resultant force, the highest resultant force was exerted at grip spans of 50, 60 and 70mm for females and 50 and 60mm for males. The lowest subjective discomfort rating was observed in the 50mm for both genders. Conclusion: Based on the result, 50mm and 60mm grip spans which provide the highest force and lowest discomfort rating might be recommendable for the male and female pliers users. Application: The findings of this study can provide guidelines on designing a hand tool to help to reduce hand-related musculoskeletal disorders and obtain better performance.