• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.211-220
• /
• 1999

The corn is mostly planted in mid-April in single-cropping silage system if possible, however, in a double-cropping silage system, the corn planting date is delayed until after the mid-May. The objective of this study was to evaluate agronomic characteristics and forage performance of the eight government recommended corn hybrids for silage at two dates of planting. Split-plot design replicated three times was used, that is, main plots were planting dates, sub-plots were eight hybrids at Suweon in 1997. Days from planting to silking of optimum planting was 84 days and that of late was 69 days. The difference in silking day among the hybrids was 6 days at optimum planting and 2 days at late planting. Plant height of optimum planting corn was higher than that of late one, however, ear height and stem diameter of optimum planting were lower than those of late planting corn. Among the corn hybrids tested, plant heights of 'P3156' and 'P3163' were higher than those of the other hybrids. Ear height of 'DK713' was the lowest among the corn hybrids and stem diameter of 'P3394' was thicker than that of the other hybrids. European corn borer(ECB) damage(16.6%) at optimum planting was lower than that(49.9%) of late, however, there were no significant ECB damage differences among the corn hybrids tested. Whole plant dry matter(DM) contents of 'P3525', 'P3394' and 'P3352' hybrids were higher than those of the other corn hybrids at harvest. Ear percentages of the total dry matter(DM) of 'P3394' and 'P3156' were higher than those of the other corn hybrids. Dry matter(DM) and total digestible nutrients(TDN) yields(19,696 and 14,621kg/ha) at optimum planting were higher than those (17,163 and 12,570kg/ha) of late planting, while there were no significant differences in DM and TDN yields among the corn hybrids tested. And those hybrids with greater proportion of grain in the whole plant have higher DM and TDN yields. Correlation coefficients for days from planting to silking with DM and TDN yields were $0.84^{**}$ and $0.87^{**}$, and those for ear percent were $0.86^{**}$ and $0.87^{**}$. Results of this study indicate that optimum planting date(15 April) is better than late planting date(16 May) in agronomic characteristics and forage production of silage corn. Days from planting to silking and ear percent as welI as other characters are important factors screening the corn hybrid for silage.

• Korean Journal of Poultry Science
• /
• v.34 no.4
• /
• pp.319-327
• /
• 2007

This experiment was designed to evaluate effects of Dandelion (Taraxzcum coreanum) and Dandelion fermented probiotics medium on the growth performance and meat quality in broiler chicks. A total of 150 "Ross" broilers，1-day old, were assigned to 5 treatments in a completely randomized design. There were 5 replications per treatment and 6 broilers in each replication for 5 weeks. The dietary treatments included a control (Dandelion and Dandelion fermentation was not added), antibiotic (0.05 chlortetracycline was added), 1.0% Dandelion supplementation and 0.5 and 1.0% Dandelion fermented probiotics, respectively. There was no significant difference in final body weight, weight gain, feed intake, and feed conversion ratio of broilers fed diets containing antibiotics, 1.0% Dandelion supplementation and 0.5 and 1.0% Dandelion fermented probiotics. The total cholesterol, HDL and LDL in plasma and meat cholesterol content was not affected by 0.5 and 1.0% Dandelion fermented probiotics and 1.0% Dandelion supplementation (P>0.05). The oleic acid content was significantly increased in 0.5% Dandelion fermented probiotics compared to that of the control (P<0.05). As a result, Dandelion and Dandelion fermented probiotics result in the influence on decreasing cholesterol in blood, particularly when adding probiotics, oleic acid that is the important factor in taste testing of meat increases thus the quality and taste of the chicken meat could be improved with the effect.

• The Journal of Society for e-Business Studies
• /
• v.21 no.3
• /
• pp.51-78
• /
• 2016

Online-to-offline (O2O) commerce is the new trend that merges online commerce with traditional industries in various fields. The primary purpose of this paper is to find out which factors influence customers' intention to switch from call-based driver-for-hire services to O2O app-based services. This study used variables and factors based on Theory of Switching Intention, and Extended Unified Theory of Acceptance and Use of Technology in order to design research questions. We surveyed 500 users of call-based driver-for-hire services. According to the result of this study, dissatisfaction with the current call-based driver-for-hire services is estimated to be a significant factor that strengthens customers' intention to switch from the call-based driver-for-hire services to the app-based services. Loyalty to the previous call-based driver-for-hire services was not seen as a crucial motivator that causes customers to switch to the new O2O driver service. Switching cost also did not play a key role in explaining the relationship between dissatisfaction with the current call-based service and the intention to use the new app-based service. Performance expectancy, easiness in use, the level of user's knowledge or available assistance in relation to the use of app-based services, and expectancy for reasonable price was found to have meaningful impacts on customers' intention to switch from the call-based driver-for-hire services to the app-based services. Age, gender and user experience on the new service were found incapable of moderating the relationship between aforementioned factors which influence customers' choice of the app-based driver-for-hire service, and customers' intent to switch to the app-based service.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.497-507
• /
• 2012

This study aims to verify how the characteristics of organizational supporting unit affect the effectiveness of company-wide HRD Education & Training program. To achieve this objective, we performed an empirical analysis, with the characteristics of organizational supporting unit comprising supervisor's support, job support, and company support as independent variables, and with the level of reaction stage, learning stage, transfer stage, and result stage as dependent variables. Empirical data was collected during the period from August 16, 2011 to September 9, 2011 by sending out questionnaires to employees of 5 securities firms listed on KOSDAQ where online and offline education & training program is running year-round with headquarter in Seoul. A total of 340 questionnaires were sent out three times for the survey, and total of 164 questionnaires were sampled for the final analysis. According to the outcome of the analysis, regarding the first hypothesis that tries to reveal how the characteristics affect the level of reaction stage, it is verified that all of supervisor's support, job support and company support have positive impact on the level of reaction stage with p value less than 0.01. In regard to the second hypothesis that tries to see how the characteristics affect the level of learning stage, it is confirmed that supervisor's support, job support and company support have significant impact on the level of learning stage with p value less than 0.05 or 0.01, respectively. Concerning the third hypothesis that aims to investigate how the characteristics affect the level of transfer stage, it is appeared that all of supervisor's support, job support and company support have positive impact on the level of transfer stage. And lastly, as for the fourth hypothesis that tries to see how the characteristics affect the level of result stage, it is analyzed that supervisor's support, job support and company support have positive impact on the level of result stage with p value less than 0.01. This study reconfirm the outcomes of previous research, which is that the effectiveness of company-wide education & training program depends not only on the contents and quality of education & training program, but also more importantly on the role of organizational supporting unit, and the working environment where what is learned in classroom can be applied to real business. Companies or experts that run education & training program in real world should recognize that the performance of training is dependent more significantly on the characteristics of organizational supporting unit rather than the design or features of education & training program.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1731-1741
• /
• 2014

Recently, many overpasses, highway, and advanced transit systems have been constructed to distribute the traffic congestion, thus small size of curved bridges with small curvature such as ramp structures have been increasing. Many of early curved bridges had been constructed by using straight beams with curved slabs, but curved steel beams have replaced them due to the cost, aesthetic and the advantage in building the section form and manipulating the curvature of beams, thereby large portion of curved bridges were applied with steel box girders. However, steel box girder bridges needs comparatively high initial costs and continuous maintenance such as repainting, which is the one of the reason for increasing the cost. Moreover, I-type steel plate girder which is being studied by many researchers recently, seem to have problems in stability due to the low torsional stiffness, resulting from the section characteristics with thin plate used for web and open section forms. Therefore, in recent studies, researchers have proposed curved precast PSC girders with low cost and could secured safety which could replace the curved steel girder type bridges. Hence, this study developed a Smart Mold system to manufacture efficient curved precast PSC girders. And by using this mold system a 40 m 2-girder bridge was constructed for a static flexural test, to evaluate the safety and performance under ultimate load. At the manufacturing stage, each single girder showed problems in the stability due to the torsional moment, but after the girders were connected by cross beams and decks, the bridge successfully distributed the stress, thereby the stability was confirmed. The static loading test results show that the initial crack was observed at 1,400 kN when the design load was 450 kN, and the load at the allowable deflection by code was 1,800 kN, which shows that the safety and usability of the curved precast PSC bridge manufactured by Smart Mold system is secured.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.29-39
• /
• 2011

Recent interests in the quality of urban space have raised awareness on the role and importance of landscape planning. Although laws and guidelines are officially ready to be imposed as for landscape planning, we do not have concrete materials that can be utilized in the course of practices. The aim of this paper in this regard is to disclose the possible difference in awareness on 'visual landscape control elements' among experts engaged with urban space planning. The expert groups are distinguished to three which are for a planning, design and engineering and the survey is made by questionnaires. The results are analyzed through basic technology statistics in SPSS and independent-sample t-test provided. The survey is done by tens of 'control elements' and the result is that specially, group 1 and group 2 in mixed landscape has the most discrepancy in awareness on those elements but relatively, they has less discrepancy in awareness on compare with other groups through all landscape area. In case of artificial landscape and mixed landscape in 'landscape controled area', the result for comparing between G1 and G2 is that there are the most discrepancy in awareness which are 7 control elements. In case of mixed landscape in 'landscape promoted area', there are 4 control elements for discrepancy in awareness between G2 and G3 which is quite different. The control elements which show the most discrepancy in awareness is height, floor space and building to land ratio in order. The shape elements has only discrepancy in awareness for comparing between G1 and G2 of artificial landscape in 'landscape controled area'. In terms of the average evaluation score of the appropriateness of these control elements, G1 seems to appreciate the role of these elements in systematic landscape planning more than the other group does. In other words, relatively low scores are given by G2 as for the overall functionality of visual landscape control elements. The texture, floor space and building of land ratio has low evaluation score for all area and types. It means that it should reverify for appropriateness of performance for landscape planning as visual landscape control elements.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.555-564
• /
• 2013

Innovative evolution in mobile devices along with recent spread of Tablet PCs and Smart Phones makes a new change not only in individual life but also in enterprise applications. Especially, in the case of medium-large mobile applications for large enterprises which generally takes more than 3 months of development periods, importance and complexity increase significantly. Generally Agile-methodology is used for a development process for the medium-large scale mobile applications, but some issues arise such as high dependency on skilled developers and lack of detail development directives. In this paper, S-MADP (Smart Mobile Application Development Process) is proposed to mitigate these issues. S-MADP is a service oriented development process extending a object-oriented development process, for medium-large scale mobile applications. S-MADP provides detail development directives for each activities during the entire process for defining services as server-based or client-based and providing the way of reuse of services. Also, in order to support various user interfaces, S-MADP provides detail UI development directives. To evaluate the performance of S-MADP, three mobile application development projects were conducted and the results were analyzed. The projects are 'TBS(TB Mobile Service) 3.0' in TB company, mobile app-store in TS company, and mobile groupware in TG group. As a result of the projects, S-MADP accounts for more detailed design information about 'Minimizing the use of resources', 'Service-based designing' and 'User interface optimized for mobile devices' which are needed to be largely considered for mobile application development environment when we compare with existing Agile-methodology. Therefore, it improves the usability, maintainability, efficiency of developed mobile applications. Through field tests, it is observed that S-MADP outperforms about 25% than a Agile-methodology in the aspect of the required man-month for developing a medium-large mobile application.

• Journal of the Korean Chemical Society
• /
• v.59 no.2
• /
• pp.164-178
• /
• 2015

The purpose of this study was to design a teaching and learning method conductive to the development of creative thinking skills and investigate its effects. It has been developed integrated mind map with feature of visualizing the divergent thinking to the aspects of Science (S), Technology (T) & Engineering (E), Arts (A), Mathematics (M). Integrated mind map can be divided into four types of STEAM type, STEA type, STEM type, STE type depending on the category of key words in the first branch. And Integrated mind map can be divided into three levels of guided, intermediate, open depending on the teacher's guide degree. And also integrated mind map activities were carried out in the form of group, class share as well as individual. This study was implemented during a semester and students in experiment group experienced individual-integrated mind map activity 10 times, group-integrated mind map activity 10 times, class share-integrated mind map activity 3 times. The results indicated that the experimental group presented statistically meaningful improvement in creative thinking skills (p<.05). And there was a statistically meaningful improvement in fluency, flexibility, originality as a sub-category of creative thinking skills(p <.05). Also creative thinking skills are not affected by the level of cognitive, academic performance, gender (p<.05). In conclusion, it was found that 'integrated mind map activity' improved student's creative thinking skills. There was no interaction effect about creative thinking skills between the teaching strategy and cognitive level, achivement, gender of those students.