• Journal of the Korean Society of Safety
• /
• 제11권1호
• /
• pp.11-15
• /
• 1996

For the assessment of fracture behaviors of structural components, various fracture mechanics parameters have been applied to date. New approaches to analyze structural fracture performance under elastic-plastic condition have been proposed by the development of testing methods for characterization of material behavior which is defying to the analysis by conventional fracture parameters. In this study, on the assumption that, initiation of crack propagation of a piping materials occurs when the crack tip strain field reaches "the local fracture strain", following two major issues are discussed ; 1) The relationship between the critical value of J-integral($J_{IC}$) and the local fracture strain (${\varepsilon}_c$) in uniaxial tensile test in the region of maximum reduction area was described. 2) To proved the validity of above relations a series of tests were performed under various temperature and on the different piping materials.materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.125-126
• /
• 2007

Polycrystalline silicon thin-film-transistors (Poly-Si TFT's) with a amorphous-$Si_xGe_y$ seed layer have been fabricated to improve the performance of TFT. The dependence of crystal structure and electrical characteristics on the the Ge fractions in $Si_xGe_y$ seed layer were investigated. As a result, the increase of grain size and enhancement of electrical characteristics were obtained from the poly-Si TFT's with amorphous-SixGey seed layer.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.53-58
• /
• 2013

Graphene-based polymer nanocomposites are very promising candidates for new high-performance materials that offer improved mechanical, barrier, thermal and electrical properties. Herein, an approach is presented to improve the mechanical, thermal and electrical properties of unsaturated polyester resin (UPR) by using graphene nano sheets (GNS). The extent of dispersion of GNS into the polymer matrix was also observed by using the scanning electron microscopy (SEM) which indicated homogeneous dispersion of GNS through the UPR matrix and strong interfacial adhesion between the GNS and UPR matrix were achieved in the UPR composite, which enhanced the mechanical properties. The tensile strength of the nanocomposites improved at a tune of 52% at a GNS concentration of 0.05%. Again the flexural strength also increased around 92% at a GNS concentration of 0.05%. Similarly the thermal properties and the electrical properties for the nanocomposites were also improved as evidenced from the differential scanning caloriemetry (DSC) and dielectric strength measurement.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1504-1505
• /
• 2007

In this paper, fully embedded high Dk BTO MIM capacitors have been developed into a multi-layered organic package substrate for low cost RF SOP (System on Package) applications. These embedded MIM capacitors were designed and simulated by using CST 3D EM simulators for finding out optimal geometries and verifying their applicability. The embedded MIM capacitor with a size of $550\;{\times}\;550\;um^2$ has a capacitance of 5.3pF and quality factor of 43 at 1.5 GHz, respectively. The measured performance characteristics were well matched with 3D EM simulated ones. Equivalent circuit parameters of the embedded capacitors were extracted for making a design library.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 한국가금학회 2003년도 제20차 정기총회 및 학술발표회
• /
• pp.135-137
• /
• 2003

The analyses of relationship between specific genes and economic traits were performed on the basis of the genetic characterization of Korean native chicken in this study. Three generation reference pedigree was established from the several lines of Korean native chicken and cornish breed for the linkage analysis and many economic traits were collected for QTL(quantitative trait loci) detection. The experimental design were planed to detect QTLs of meat quality and laying performance from those two distinctive breeds.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 한국에너지공학회 1999년도 추계 학술발표회 논문집
• /
• pp.85-88
• /
• 1999

대용량 발전 시설의 개발을 목표로, 연구에 대한 많은 관심이 집중되어 온 인산형 연료전지는 이미 전 세계적으로 연구의 선두에 있는 국가들에서 수백 KW급 규모로 상용화단계에 진입해 있는 상태이고 미국 등지에서는 전력회사 등을 통하여 MW급 규모의 응용이 이루어지고 있다. 다른 연료전지에서와 마찬가지로 인산형 연료전지에서도 산소의 환원반응이 느린 점과 산소의 환원시 높은 과전압으로 인한 성능이 감소가 한계요인으로 되고 있어 이의 극복을 위한 많은 연구가 있어 왔으며 최근의 개발 방향은 발전시스템의 고성능화와 전지의 수명연장, 그리고 경제성 확보 등의 측면에서 이루어지고 있다.(중략)

• Journal of Radiation Industry
• /
• 제7권1호
• /
• pp.61-67
• /
• 2013

In this study, we developed ionic permselective membrane as a core material of redox flow battery using radiation grafting method. Two ionic permselective membranes, ETFE-g-PSSA and ETFE-g-PVBSA were prepared by radiation grafting with styrene and VBC followed by sulfonation, respectively. We confirmed that the prepared membranes were successfully prepared via FT-IR. The prepared ionic permselcetive membranes were characterized and the performance of the membranes were evaluated as ionic permselective membranes for vanadium redox flow battery.

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.323-337
• /
• 2015

Membrane Fouling was considered as major drawback in various industrial applications. Thus, this paper reviews the surface modification of polyethersulfone (PES) membranes for antifouling performance. Various modification techniques clearly indicate that hydrophilicity has to improve on the PES membrane surface. Moreover, the mechanism of fouling reduction with corresponds to various modification methods is widely discussed. Incorporation of hydrophilic functional groups on PES membrane surface enhances the surface free energy thereby which reduces the fouling. Characterization techniques adopted for the surface modified membranes was also discussed. These studies might be useful for the other researchers to utilize the modification technique for the applications of waste water treatment, chemical process industry and food industry.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.357-360
• /
• 2013

A modified SQI method using magnetic leakage flux (MFL) signal for underground gas pipelines' defect detection and characterization is presented in this paper. Raw signals gathered using MFL signals include many unexpected noises and high frequency signals, uneven background signals, signals caused by real defects, etc. The MFL signals of defect free pipelines primarily consist of two kinds of signals, uneven low frequency signals and uncertain high frequency noises. Leakage flux signals caused by defects are added to the case of pipelines having defects. Even though the SQI (Self Quotient Image) is a useful tool to gradually remove the varying backgrounds as well as to characterize the defects, it uses the division and floating point operations. A modified SQI having low computational complexity without time-consuming division operations is presented in this paper. By using defects carved in real pipelines in the pipeline simulation facility (PSF) and real MFL data, the performance of the proposed method is compared with that of the original SQI.

• Proceedings of the Optical Society of Korea Conference
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.248-249
• /
• 2003

The characterization of laser mirrors is important for obtaining proper performance of femtosecond lasers. Characteristics of laser mirrors are usually described in terms of their reflectivity at a certain wavelength. In femtosecond laser applications, however, the dispersion property of the mirror should be considered because the temporal shape of a femtosecond light pulse changes during the reflection at the mirrors. (omitted)