• Title/Summary/Keyword: perfect number

Search Result 274, Processing Time 0.025 seconds

Performance analysis of iterative groupwise equal-delay interference cancellation(IGEIC) for multiuser detection of coherent W-CDMA system (동기복조 W-CDMA 시스템의 다중 사용자 검출을 위한 반복 그룹단위 등지연 간섭제거(IGEIC) 알고리즘 성능해석)

  • 구제길;최형진
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.3B
    • /
    • pp.179-187
    • /
    • 2002
  • This paper proposes and analyzes the iterative groupwise equal-delay interference cancellation(IGEIC) algorithm for coherent detection of an asynchronous wideband DS-CDMA system in a single cell over multipath fading channels. The IGEIC algorithm divide users in a system into several groups, and subtract out interference signal from the received signal as many as the number of users within a user group, iteratively. The IGEIC algorithm is also classified into the iterative groupwise equal-delay serial interference cancellation(IGESIC) algorithm and the iterative groupwise equal-delay parallel interference cancellation(IGEPIC) algorithm. In the case of perfect correlation for spreading codes, it shows that the performance of IGESIC and IGEPIC algorithm is the same after interference cancellation of as many as the number of users within a user group, but the performance of IGEPIC algorithm is superior to the IGESIC algorithm just before fecal cancellation within a user group. The results show that (he performance of the two proposed algorithms are also superior to the SIC algorithm by 3dB.

Comparison of Shear Strength Equation for Flat Plates with GFRP Plate (GFRP 판으로 보강된 플랫 플레이트의 전단강도식에 관한 규준의 비교 분석)

  • Kim, Min Sook;Hwang, Seung Yeon;Kim, Heecheul;Lee, Young Hak
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.27 no.4
    • /
    • pp.247-254
    • /
    • 2014
  • In this study, shear test performed to investigate the shear behavior of flat plate that reinforced by embedded GFRP(glass fiber reinforced polymer) plate with openings. Shape of the GFRP shear reinforcement is a plate with several openings to ensure perfect integration with concrete. The test parameters include the distance between the column face and the first line of GFRP plate and number of GFRP plate vertical strip. The result of test showed that when number of GFRP plate vertical strip was increased, shear strength improved. The shear strength for flat plate reinforced GFRP plate in various codes including ACI 318, BS 8110, EUROCODE 2, and KCI were compared to provide more rational approach for reinforced concrete flat plates with GFRP plate.

Performance Analysis of DS/CDMA Hierarchical Cellular System on Shadowing and Imperfect Power Control (전파음영과 불완전 전력제어를 고려한 DS/CDMA 계층 셀룰라 시스템의 성능 분석)

  • 윤석재;김항래
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.7
    • /
    • pp.1037-1047
    • /
    • 2001
  • In this paper, the capacity for the reverse link of the imperfect power controlled DS/CDMA hierarchical cellular system is analyzed considering imperfect sectorization in shadowing environment. Unlike the theoretical assumption, the power control of the DS/CDMA hierarchical cellular system is not perfect. Therefore, we consider various parameters such as the imperfect power control, the imperfect sectorization, the processing gain and the number of microcell interferers, which cause the capacity variation of the DS/CDMA hierarchical cellular system. It is shown that the capacity of DS/CDMA hierarchical cellular system is decreased according to the increase of the deviation of the imperfect power control, the overlapped angle, the power ratio between macrocell and microcell and to the decrease of processing gain, the number of microcell interfering users. Also, it is observed that the hierarchical cellular system can increase the user capacity from 1.54 to 3.89 times compared to the homogeneous macro-cellular system.

  • PDF

Implementation and Performance Enhancement of Arithmetic Adder for Fully Homomorphic Encrypted Data (완전동형암호로 암호화된 데이터에 적합한 산술 가산기의 구현 및 성능향상에 관한 연구)

  • Seo, Kyongjin;Kim, Pyong;Lee, Younho
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.27 no.3
    • /
    • pp.413-426
    • /
    • 2017
  • In this paper, we propose an adder that can be applied to data encrypted with a fully homomorphic encryption scheme and an addition method with improved performance that can be applied when adding multiple data. The proposed arithmetic adder is based on the Kogge-Stone Adder method with the optimal circuit level among the existing hardware-based arithmetic adders and suitable to apply the cryptographic SIMD (Single Instruction for Multiple Data) function on encrypted data. The proposed multiple addition method does not add a large number of data by repeatedly using Kogge-Stone Adder which guarantees perfect addition result. Instead, when three or more numbers are to be added, three numbers are added to C (Carry-out) and S (Sum) using the full-adder circuit implementation. Adding with Kogge-Stone Adder is only when two numbers are finally left to be added. The performance of the proposed method improves dramatically as the number of data increases.

A Study on the Improvement of Port State Control in Korea (우리나라의 항만국통제 제도의 개선에 관한 연구)

  • 박병곤;정재용;박진수
    • Journal of the Korean Institute of Navigation
    • /
    • v.23 no.4
    • /
    • pp.43-61
    • /
    • 1999
  • To ensure ship's safety and preserve the marine environment from ship, IMO(International Maritime Organization) has been making much efforts. Nevertheless there are still many possibilities threatening ship's safety and the marine environment. Many vessels navigate at sea in lack of standard required by the International Convention relevant to ship's safety and the protection of marine environment. Even though the administration is responsible for perfect and continuous control for safety of ship, it cannot has jurisdiction over ships hoist its flag reasonably at all times. So the Port State has strengthened the Port State Control(PSC) activity as one step of eliminating sub-standard vessels. In the light of the fact that mentioned above, this study deals with PSC activity in Korea and port of Pusan. Total 582 ships, inspected in port of Pusan from 1st January 1998 to 30th September 1999, were analyzed in various aspect and extracted results as follows : \circled1 The inspection rate in Korea was much lower than the other states taking part in Tokyo MOU, \circled2 For flag state, the ships belong to flag of convenience(FOC) had much more deficiencies than non-convenience flag ships, \circled3 For ship type, 39 number of general dry cargo ship were detained at Pusan with serious deficiencies, \circled4 For deficiency item, the items such as life saving appliances, safety in general, navigation, load lines and fire-fighting appliances were occupied over 71.7% of total number of deficiencies, \circled5 In Asia-Pacific region, Korea was one of flags with detention percentages exceeding 3-year(1996~1998) rolling average detention percentage. Average detention rate of Korean vessels was 6.73% which was over 0.24% of average detention rate(6.49%) in Asia-Pacific region. These results may reflect to improve the performance of PSC inspection for foreign vessels and are useful for preparing PSC inspection for ocean-going ships registered in Korea.

  • PDF

The effect of water status on productive and flowering variables in young 'Arbequina' olive trees under limited irrigation water availability in a semiarid region of Chile

  • Beya-Marshall, Victor;Herrera, Julio;Fichet, Thomas;Trentacoste, Eduardo R.;Kremer, Cristian
    • Horticulture, Environment, and Biotechnology : HEB
    • /
    • v.59 no.6
    • /
    • pp.815-826
    • /
    • 2018
  • The intense drought affecting olive production in Northern Chile underscores the need to research non-traditional irrigation strategies to obtain the best crop performance. Accordingly, this study aimed to obtain preliminary data to guide future research on this topic. Different water replenishment levels on crop evapotranspiration ($ET_c$ ; 13.5, 27.0, 40.5, and 54%) were established in a young orchard, cv. Arbequina, from the end of fruit drop (EFD) to full bloom in the next season. We evaluated the influence of plant water status (${\Psi}_{stem}$ ) and crop load, considered as function of fruit number divided by trunk cross-sectional area, on reproductive and productive variables using multiple linear regressions. Our results show that crop load and ${\Psi}_{stem}$ measured from EFD to harvest affected yield components. Nevertheless, ${\Psi}_{stem}$ had the strongest influence on fruit size, pulp development, oil accumulation, and yield. Oil content and yield were reduced by 54% and 50% for each MPa, respectively, from ${\Psi}_{stem\;EFD-H}$ -1.8 MPa, an effect that intensified as crop load increased. During the period of flower development (September-November), the number of flowers per inflorescence and percentage of perfect flowers were reduced when ${\Psi}_{stem}$ was less than -2.0 MPa. These preliminary results showed that bud differentiation, inflorescence and flower formation are highly sensitive to water deficit.

Performance Analysis of Multi-Carrier CDMA Trellis Coded 16 QAM System with Near/Far Effect in Frequency Selective Multipath Fading Channel (주파수 선택성 다중경로 페이딩 채널에서 Near/Far 영향을 받는 Multi-Carrier CDMA Trellis Coded 16 QAM 시스템의 성능해석)

  • 노재성;강희조;김춘길;김언곤;조성준
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.3A
    • /
    • pp.352-361
    • /
    • 2000
  • The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluate the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model, interference to carrier Ratio, I/C, ranges from -4 dB to 4dB, and at each 2 dB interval, 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. From the results, the third model(i.e. perfect power control) shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.

  • PDF

A study on injuries in deciduous teeth and permanent teeth (유치와 영구치의 외상에 관한 연구)

  • Lee, Mi-Ra;Ji, Min-Gyeong;Min, Hee-Hong
    • Journal of Korean society of Dental Hygiene
    • /
    • v.11 no.1
    • /
    • pp.127-136
    • /
    • 2011
  • Objectives : The writer aimed to examine the dynamic aspect on damage and to be conducive to the swift cure according to right treatment to educate prevention of injury through surveying on the number of the damaged teeth given injury, tooth kind, type in damage, place and cause for being damaged, frequency by month and by time level, and location of the damaged tooth. Methods : Targeting 343 teeth of receiving injury in 201 patients who visited the department of pediatric dentistry, the department of preservation, and the oral and maxillofacial surgery in a dental hospital in Cheonan city from April 2007 to April 2009, by having the dental injury as the main reason, the following conclusions were obtained. Results : 1. Deciduous teeth were indicated to be the highest in imperfect luxation with 60.7%, and were indicated to be in order of crown fracture with 25.5%, root fracture with 12.4%, and perfect luxation with 1.4%. The permanent teeth were indicated to be the highest in crown with 58.1%, and were indicated to be in order of imperfect luxation with 27.3%, root fracture with 13.1%, and perfect luxation with 1.5%(p<0.001). 2. In case of deciduous teeth for a place with damage, the home was indicated to be the highest with 31.7%. The permanent teeth were indicated to be the highest(p<0.001) in the road and stairs with 40.4%. As to a cause for damage, both deciduous and permanent teeth were indicated to be the highest(p<0.001) in a cause for falling with 53.1% and 30.8%, respectively. 3. As for a treatment method, in case of deciduous teeth, the close observation was indicated to be the highest with 46.9%. In permanent teeth, the resin restoration was indicated to be the highest(p<0.001) with 22.2%. Dental injuries in deciduous teeth and permanent teeth are showing diverse aspects. Conclusions : It is important to arrange guidelines on cure of the damaged teeth by injury through continuing a dynamic research on these aspects. Also, the damage in deciduous teeth may have direct and indirect influence upon growth in successional permanent teeth. Thus, through careful treatment, the injury needs to be minimized. It is considered to be likely necessary for a right coping method when injury occurs, and above all, for enough prior education so that injury cannot occur.

Perfect stage of Microsphaera polygoni (DC.) Sawada on Robinia pseudoacasia and its phylogenetic relationship to Gen Erysiphe (아카시아흰가루병균(病菌)의 완전시대(完全時代) 및 Erysiphe 속(屬)과의 계통관계(系統關係))

  • Kim, Ki Chung
    • Journal of Korean Society of Forest Science
    • /
    • v.9 no.1
    • /
    • pp.81-86
    • /
    • 1969
  • In present paper, the morphological characters in perfect stage of Microsphaera polygoni(DC.) Sawada on Robinia pseudoacasia were investigated and the phylogenetic relationship between Gen. Erysiphe and Microsphaera was discussed with variation of appendages. The results are summarized as follows: 1. The perithecia of the powdery mildew fungus on Robinia pseudoacasia were rarely formed on the surface of the leaves just before difoliation in late autumn and their forming period was very short. 2. Powdery mildew fungus on R. pseudoacasia was identified as Microsphaera polygoni(DC.) Sawada in Korea. 3. Appendage of the fungus are both Erysiphe and Microsphaera types in shape, and plenty of intercalary types are intervened between both types. Number of perithecia bearing upper various appendages appears the normal distribution with both poles of typical Erysiphe and Microsphaera types 4. If Blumer's theory on the phylogenetic relationship of Erysiphaceae is right, variation of the appendages of the fungus might be evolved from Gen. Erysiphe to Gen. Microsphaera.

  • PDF

Bit-serial Discrete Wavelet Transform Filter Design (비트 시리얼 이산 웨이블렛 변환 필터 설계)

  • Park Tae geun;Kim Ju young;Noh Jun rye
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.4A
    • /
    • pp.336-344
    • /
    • 2005
  • Discrete Wavelet Transform(DWT) is the oncoming generation of compression technique that has been selected for MPEG4 and JEPG2000, because it has no blocking effects and efficiently determines frequency property of temporary time. In this paper, we propose an efficient bit-serial architecture for the low-power and low-complexity DWT filter, employing two-channel QMF(Qudracture Mirror Filter) PR(Perfect Reconstruction) lattice filter. The filter consists of four lattices(filter length=8) and we determine the quantization bit for the coefficients by the fixed-length PSNR(peak-signal-to-noise ratio) analysis and propose the architecture of the bit-serial multiplier with the fixed coefficient. The CSD encoding for the coefficients is adopted to minimize the number of non-zero bits, thus reduces the hardware complexity. The proposed folded 1D DWT architecture processes the other resolution levels during idle periods by decimations and its efficient scheduling is proposed. The proposed architecture requires only flip-flops and full-adders. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a Hynix 0.35$\mu$m STD cell library. The maximum operating frequency is 200MHz and the throughput is 175Mbps with 16 clock latencies.