• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.9-15
• /
• 2006

The quality of wood is largely depend on the characteristics of xylem tissue and their variation. They may include tracheid length, microfibril angle, distribution and amount of resin canal, as well as specific gravity as indicator of material properties. In this study, variation of these elements between and within 30 superior families of Pinus densifloa in progeny test forest were examined and the results are as follows; In terms of elongation ratio of tracheid length which is less than 1%, the sample tree showed a transition to matured wood after 13 years particularly in Kangwon 25, 30, 90, 56 and Chungnam 4 families. The average specific gravity were from 0.35 to 0.49, and differences between the families were significant. Number of transverse resin canal per unit area were also found to be significant between the families. The microfibril angles measured at 15th ring number ranged from 0.9 degree to 28.6 degree. More studies are necessary to tell whether these variation is inherited by genetic or individual characteristic. However it would be desirable that these elements be considered as key elements in the early stage of selection process of superior tree to ensure good quality of wood production in future.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.167-175
• /
• 2017

Objectives: Children may be more exposed to certain environmental contaminants because they react with greater sensitivity and have different food intakes and breathing rate per unit of body weight compared to adults. The aim of this study was to determine general exposure factors such as skin surface area, period and frequency of exposure, and others among Korean children aged ${\leq}18$ years old. This study was carried out as the first of its kind in Korea. Methods: We developed 23 recommended exposure factors for Korean children aged 0 to 18 years by reclassifying raw data from the National Health and Nutrition Examination Survey and the National Statistical Information Service, as well as through investigation by experiments in the absence of related data. Results: Reflecting the activity patterns of about 9,000 children, the daily inhalation rates for long-term exposure ranged from $9.49m^3/day$ for children from birth to <2 years to $14.98m^3/day$ for children aged 16 to <18 years. The research found that Korean children spent an average of 22.21 hours indoors, 0.67 hours outdoors, and 1.12 hours in-transit every day. Young children (${\leq}2$ years old) spent approximately 34 more minutes outdoors on weekends than they did on weekdays. Conclusion: Various physiological variables in the human body reflect characteristics of children that can directly influence risk exposure. Therefore, the identification of general exposure factors based on Korean children is required for appropriate risk assessment.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.307-313
• /
• 2014

In order to predict the post-cracking tensile behavior of fiber reinforced concrete, it is necessary to evaluate the fiber orientation factor which indicates the number of fibers bridging a crack. For investigation of fiber orientation factor on a circular cross-section, in this paper, cylindrical steel fiber reinforced concrete specimens were casted with the variables of concrete compressive strength, circular cross-section size, fiber type, and fiber volumetric ratio. The specimens were cut perpendicularly to the casting direction so that the fiber orientation factor could be evaluated through counting the number of fibers on the circular cross-section. From the test results, it was investigated that the fiber orientation factor on a circular cross-section was lower than 0.5 generally adopted, as fibers tended to be perpendicular to the casting direction. In addition, it was observed that the fiber orientation factor decreased with an increase of the number of fibers per unit cross-section area. For rational prediction of the fiber orientation factor on a circular section, a rigorous model and a simplified equation were derived through taking account of a possible fiber inclination angle considering the circular boundary surface. From the comparison of the measured data and the predicted values, it was found that the fiber orientation factor was well predicted by the proposed model. The test results and the proposed model can be useful for researches on structural behavior of steel fiber reinforced columns with a circular cross-section.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.556-563
• /
• 2014

The purpose of this study was to evaluate the effects of container types on seedling growth of Chamaecyparis obtusa (2-year-old) in the container nursery culture. We used three container types [20 cavities (400 mL/cavity, $150seedlings/m^2$), 24 cavities (320 mL/cavity, $200seedlings/m^2$), and 35 cavities (240 mL/cavity, $260seedlings/m^2$)] and measured root collar diameter (RCD), height, biomass, root density and seedling quality index (SQI). The RCD, height, biomass, root density and SQI were the highest at 20 cavities/tray because this container has the largest volume and lowest seedling density. However, H/D and T/R ratio at all container types were not significantly different. The total biomass per unit area ($m^2$) were the lowest at 35 cavities/tray and those at both 20 and 24 cavities/tray were not significantly different. Container volume was positively correlated with RCD, height, biomass, root density and SQI except for H/D and T/R ratio, while seedling density negatively affected on them. Based on these results, 20 cavities/tray are optimal for container seedling production of C. obtusa. Usage of optimal container will make us get better quality seedlings and reduction of production costs in the container nursery as well as good field performances with higher survival rate in plantation.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.291-297
• /
• 2018

Vertical farming systems offer many advantages in urban spaces. They have also been proposed as an engineering solution to increase the productivity per unit area of cultivated land by extending crop production in the vertical dimension. However, soil water retention is a major constraint affecting the plant environment. This study analyzed the effects of growth environment of Tropaeolum majus and Fragaria spp., on the vertical farming system, by using four different types of cover material types including sphagnum moss (Control), a shading net (S.N.), multi-layered fabric (M.L.F.), and non-woven fabric (N.W.F.). The volumetric soil moisture contents and plant characteristics were investigated from May to September 2014. Plant materials were individually cultivated in hanging baskets measuring $30{\times}17{\times}17cm$, filled with a mixture of soil and perlite, and placed at 1.5m height. Each treatment was performed in quadruplicate and consisted of five plants, amounting to a total of 20 plants. The analysis indicated that different covers were associated with multiple functions and soil water retention improvements may have a positive impact on the vertical farming system. The difference in soil water retention increased in the following order: M.L.F. > Control > N.W.F. > S.N.. Furthermore, the differences in plant height and survival rate increased in the following order: M.L.F. > Control > N.W.F. > S.N. Therefore, M.L.F yielded satisfactory good response for the vertical farming system of cover materials. Our results clearly demonstrate that vertical spaces represent an attractive alternative to urban farming and suggest that further increases in yield may be achieved via different cover materials in vertical farming using hanging baskets.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.423-428
• /
• 2014

Digital X-ray imaging devices using a TFT based flat panel array has been used in medical field. But, recently, lots of research on the photon counting sensor has been reported. In this study, we evaluated the physical properties of the photoconductor by suggesting the standard and testing method for quantitative performance evaluation of photon counting x-ray imaging sensor. First, we measured the leakage current and the sensitivity of photon counting x-ray imaging sensor and we evaluated the characteristic of rising time for determining the signal shaping time. In addition, the set-up study was conducted on the basis of the IEC 62220-1-2 recommendations to define the number of incident photons per unit area. And the efficiency of the charge collection was also evaluated. As a result, the characteristic was measured as $200pA/mm^2$ of the leakage current, $7{\mu}C/cm^2R $ of the X-ray sensitivity, and $0.765{\mu}s$ of the rising time.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.326-326
• /
• 2017

Climate warming is the issue on the global scale. Soybean can be seriously damaged when high temperature occurs during a reproductive stage such as the flowering and pod-setting period according to the Representative Concentration Pathway (RCP) (2021~2100) 8.5 scenarios. The weather in 2016 was very different from other years (average for 30 years from 1980 to 2010) ; the highest temperature was $33.7^{\circ}C$ which was higher $3.29^{\circ}C$ than average temperature from last 30 years and average rainfall was 26.5 mm, lower 140.9 mm than average rainfalls from other years. Especially, the highest temperature during soybean flow-ering and pod setting stage was $26.8^{\circ}C$ which was higher $0.1^{\circ}C$ and rainfall was 172.2 mm, higher 47.8 mm than other years from the first to the 20th in the October at soybean seed elongation stage. Soybean leaves were turned upside down by the drought stress during the flowering and pod-setting stage. The numbe-r of pods and seeds per unit area decreased 11.0% and 30.3% compared with the previous year, respectively. The ripening period was prolonged by 21 days because of high temperature and soil moisture contents due to the continual rainmade increase of the seed weight up to 15.6% and the yield decreased 7.1% compared to the previous year.

• Radiation Oncology Journal
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1986

In order to clarify the effect of radiation on the mouse jejunal crypt cells by combined administration of administration and radiation and also to evaluate the enhancing effect of adriamycin, the authors performed this study by delivering single irradiation of 1,000 to 1,600 rad to the whole abdomen of mice by cobalt-60 teletherapy unit. In combination with adriyamycin treatment groups, the drug was administered as single dose of 10 mg/kg either 2 hours before or 4 hours after graded single dose,900 to 1,400 rad, of irradiation. The authors studied the quantitative changes of intestinal crypt cells by microcolony survival assay technique and the morphological changes of small intestinal villi by scanning electron microscope in mice following to combined therapy with adriamycin and irradiation, The average number of jejunal crypts per circumference was $130{\pm}16$ in control group. The mean lethal dose(Do) of each irradiation alone and combined therapy groups 2 hours before and 4 hours after irradiation, were 160, 170, and 170 rad in cell survival curves, respectively. The dose effect factor(DEF) of adriamycin in each groups of pre-irradiation and post-irradiation were 1.19 and 1.26, respectively. The conical shaped villi were noted on 1,200 rad in irradiation alone group and 1,000 rad in combined groups. For the proper clinical application we must be careful of the radiation injury to small bowel when the anticancer chemotherapy and radiation therapy to the abdomen and pelvic area are used as combined therapeutic modality.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.638-644
• /
• 2018

In this paper, we develop a measurement system that uses 3D Scintillator and NaI(TI) Detector to 3-dimensionally identify the location of multiple radiation sources in moving vehicle loads. The radiation measurement system consists of radiation measurement (plastic scintillator), 2-channel Pulse Counter Board, nuclide analysis (NaI(TI) detector) and 1 channel MCA Board. The source locator algorithm calculates the coordinate value of the ratio of the CPS value($1/r^2$) of the source according to the angle(${\theta}$) in inverse proportion to the square of the distance(X, Y) through the SVM classification. The coordinate values are input every predetermined period of the spectrum, and after analyzing the spectrum per unit cycle, the position of the nuclide at the time is calculated by determining whether or not the nuclide is present in the remaining part except for the background area. As a result of the position discrimination test, the error within the international standard of ${\pm}1m$ was shown. Thus, the utility of the proposed system has been demonstrated.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.633-640
• /
• 2012

White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth. On the other hand, in the results of examining physiological changes before and after treatment on fine dust PM10 and carbon dioxide removal capacity in a closed chamber under an artificial light source, the patterns of carbon dioxide and fine dust removal were similar among the treatment groups according to light condition, but according to plant type, the removal rate per unit leaf area was highest in $Spathiphyllum$ and lowest in $Dieffenbachia$. In the experiment on dust and carbon dioxide removal, the photosynthetic rate was over 2 times higher after the treatment, and the rate increased particularly markedly under compound light and white light, suggesting that the photosynthetic rate of plants increases differently according to light quality. These results show that light quality has a significant effect on the photosynthetic rate of plants, and suggests that plants with a high photosynthetic rate also have a high carbon dioxide and dust removal capacity. In conclusion, the photosynthetic rate of foliage plants increased under white and blue light that affect photosynthesis and the increased photosynthetic rate reduced carbon dioxide and fine dust, and therefore white and compound light were found to be the optimal light sources most functional and economically efficient in improving ornamental value and indoor air quality.