• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.79-83
• /
• 1971

To investigate the effects of seed treatments and liming on nodulation and growth of lucerne(Medicago sativa L.) in an upland yellow-brown earth in N.Z. the five levels of seed treatments(Uninoculated, Inoculated, Inoculated plus lime pelleted, Inoculated plus 50/50 phosphate/dolmite pelleted, Inoculated plus ta1c pelleted), and 2 levels of lime applications (0, 25kg/10a) were compared and their interactions were observed, and then the following results were obtained. 1. In oder to obtain the effective nodulation of lucerne on acid soil it is usually necessary to apply lime and inoculate the seed. 2. The coating of inoculated lucerne seed with adequate materials will promote the nodulation. 3. The pelleting of lucerne seed may be a of reducing the need for the heavy liming. 4. The finely grounded lime was the best to use origin upland yellow-brown earth. 5. When the seed were not inoculated or pelleted with inferior material, liming is very effective for the nodulation and growth of lucerne. 6. The pelleting seed will reduce the laborious work and expenditure.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.381-390
• /
• 2002

Direct seeding of rice-seed pellets is expected to be an alternative for solving problems in current direct seeding cultivation of rice. but mass production of rice-seed pellets is prerequisite for practical application. Design. construction and performance evaluation of an experimental rice seed pelleting machine were carried out for mass production of rice-seed pellets. The pelleting machine intended to make a ball type rice-seed pellet, which have 3∼5 rice seeds and diameter of which is 12 mm. Pellet materials ; rice seeds, soil, and binder were mixed and kneaded by the mixer. The designed rice seed pelleting machine fed pellet materials by screw conveyor to forming rolls and made rice-seed pellets. Capacity, ratio of perfect rice-seed pellets, seed and pellet material loss were investigated as mixing ratio of soil to rice seed and feeding rate of pellet materials. The pelleting machine showed up to 37,000 pellets/h of pelleting rate, 61∼71% of weight ratio of perfect rice-seed pellets to pellet materials supplied, 17∼48% of seed loss ratio. Average weight and average diameter of the pellets were 1.66 g and 12.0 mm. respectively. More than 3 rice seeds were included in most pellets at 6 : 1 of mixing ratio of soil to rice seed. And compression strength of the pellets was in the range of 88-130 N. To improve performance of the pelleting machine, improvements of the forming rolls, feeding mechanism, and discharging mechanism for reducing loss of pellet materials and seeds damage are needed.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.403-410
• /
• 2003

To enhance the performance of a rice seed pelleting machine and the quality of rice-seed pellets made, improvement of the rice seed pelleting machine developed previously(Park, 2002) was tried and its performance was evaluated. As compared with the previous pelleting machine, a feeding mechanism of pellet materials to the forming rolls was changed from screw conveyor to hydraulic cylinder for proper feeding, rings were installed among rows of semi-spherical forming grooves on the forming rolls for reducing pellet materials loss and seeds damage, and discharging air nozzles were added for complete discharging of the pellets made. Through performance tests, capacity, pelleting ratio, and seed loss ratio of the pelleting machine were investigated at the mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : 1, and rotating speeds of the forming rolls of 7 rpm, 10 rpm, and 13 rpm. As results of performance evaluation, pelleting ratios were in the range of 77 ∼ 89 ％, and maximum pelleting ratio increased by 18 % in comparison with that of the previous machine. Maximum capacity was about 110 kg/h(about 63,000 pellets/h), which was increased by 70 % in comparison with that of the previous machine. But, ratios of seed loss were in the range of 24 - 49 ％, which were not improved.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.4
• /
• pp.295-300
• /
• 2001

This experiment was conducted to evaluate the germination rate according to temperature, pelleting materials, pelleted size, seed storage periods under light and dark conditions in Rehmannia glutinosa. The highest germination rate was obtained from $25^{\circ}C$ in both light and dark condition. Two-year old seeds showed higher germination rate compared to one-year old seed. Talc material showed the highest germination rate among the pelleting materials by 82.5%. Among the different pelleting sizes, the highest germination rate was shown in 2.0 mm, and especially Talc pelleting showed 100% germination rate on 17days after seeding. In case of combination of pelleting materials, both of talc + vermiculite, zeolite + vermiculite showed lower germination rate than the control and 0.7 mm pelleted seed showed the highest germination rate.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.130-133
• /
• 2006

This study was conducted to select Codonopsis lanceolata seed's new pelleting particulate materials and adhesives. Different adhesives (Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), Polyvinyl pyrrolidone (PVP), Xanthan gum (XG), Arabic gum (AG)) and particulate materials (Illite, Diatomite, Pyrophyllite + Illite + Diatomite (PID), Pyrophyllite + Illite + Talc (PIT), Bentonite + Talc (BT)) were tested for seed pelleting. PID for Codonopsis lanceolata seed pelleting appeared to be the best particulate material. Among the pelleting adhesives, PVP was the best adhesive for seed pelleting, and the optimum concentration for germination of pelleting seed was 1 %. Germination rate of the pelleted seeds treated with PID particulate material and PVP adhesive was higher (86.8%) than those of raw seeds (85.5%). $T_{50}$ and MDG of pelleted Codonopsis lanceolata seed required five and eight days at soil moisture content of 50%, respectively.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.678-684
• /
• 1996

Seed pelleting have successfully been used in many crops for better crop estab-lishment and for mechanizing seeding process for small crop seeds in developed countries. In this experiment various pelleting materials and binders were tested to get basic information on the shape, hardness and germination of pelleted seesds of cabbage (cv. Seoul Beachoo) and rice (cv: Ilpoom). PLL-11, paper clay, lime and coal ash were good materials to make smooth shape of the pellets with pel gel and AG-11 as binders, and PLL-ll as material and pelgel and AG-11 as binders were the best among them in consideration of shape and hardness together. The hardness of the pelleted seeds were differed with each other depending on both of the pelleting materials and binders. Pelleted cabbage seeds coated by pelgel as binder with different materials showed lower germination percentge than control in general, but the seeds pelleted by PLL-11 with different binders showed no restraint effects. When the cabbage seed pelleted by PLL-11 with pelgel as binder showed almost same germination percentage as control. The pH and electrical conductivity of the extract from bentonite and zeolite were very higher than other materials tested and germination percentage showed a little lower than control when the cab-bage seed planted on the filter paper damped with the extract. As a result, PLL-11 as pelleting material and pel gel and AG-11 as binder appeared the good materials to make pellets of cabbage seeds and rice in consideration of shape, hardness and germination.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.475-480
• /
• 2005

Surface sowing is one of the most important methods to establish and improve grassland. An interest in seed-coating technique for surface sowing has been increased tremendously in the world today. An experiment was conducted to develop a technique for pelleting seeds for pasture production in woodlands. Results showed that pelleting seeds was a better technique than coating seeds because the pelleting reduced coating time of seeds, and it increased the amounts of coated seeds per hour. The pelleting technique was able to minimize damage to seeds through the lower temperature processing and by reducing time for drying, thus, germinating energy, and germination rate of pelleted alfalfa seeds improved. Emergence, establishment, and early growth of alfalfa from pelleted seeds were also improved in woodlands. Based on this study, we could conclude that the seed-pelleting is a very useful technique for the establishment and early growth of alfalfa in woodlands.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.721-730
• /
• 2002

This study was carried out to select new pelleting binder and material for Welsh onion seeds. The optimum treatments of the various plant growth regulators to improve seed germination of the Welsh onion was also estimated. There were no significant effects of growth regulators on the germination percentage, but germination was faster according to the number of days to 50% of the final germination ($T_{50}$) and the mean number of days to germination (MDG) than those of the control. Germinability was increased when the seeds were soaked in gibberellic acid ($GA_3$) solution for 24hrs, even though there was no synergy effect on the germinability when $GA_3$ was mixed with 6-benzylaminopurine (BAP). The optimum treatment for improving germination of Welsh onion was observed when the tested seeds was soaked in 500 $\mu$M of $GA_3$ at $20^{\circ}C$ for 24hrs. Also, when the seeds soaked in the aforementioned treatment, the rate of germination was increased at lower temperature than at $20^{\circ}C$, the optimal temperature. The percentage and the speed of seed germination depended on the kinds of pelleting binder and their concentration. It showed that the higher the concentration of the binder for seeds pelleting, the lower the percentage of seed germination. Among the pelleting binder, polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were the best binders for seed pelleting, because seed germination using those binder did not affect on the concentration of binder. On the other hand, Carboxymethy cellulose (CMC) and methyl cellulose (MC) severely inhibited the seed germination The germinability was also different arcording to the pelleting materials. Among the different 58 pelleting materials, kaoline alone, the mixture of bentonite and kaoline, the mixture of bentonite, calcium carbonate and diatomaceous earth #300 were found as the best pelleting materials for welsh onion seeds.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.2
• /
• pp.128-135
• /
• 2020

Background: Sowing seeds of Adenophora triphylla is known to be difficult owing to their small size and irregular seed shape. Therefore, this study was conducted to develop a seed pelleting technique to save labor during sowing. Methods and Results: To identify the optimal germination temperature for A. triphylla seeds, the temperature range was set from 17℃ to 32℃. Germination surveys were conducted in plastic greenhouse conditions in March, April, and May to determine the appropriate sowing time. The optimal germination temperature for A. triphylla seeds was 29℃ and May was the optimal sowing time in plastic greenhouse conditions. Covering materials for seed pelleting used talc (T), kaolin (K), calcium carbonate (C), and vermiculite (V). The pellet binder used agar (A), pectin, xanthan gum, polyvinyl alcohol (PVA), and sodium alginate (S). The best suited treatment mixture were the best suited in kaolin / calcium carbonate / vermiculite (KCV), talc / calcium carbonate / vermiculite (TCV) mixture treatment for covering material, and sodium alginate (S), agar (A) as pellet binder, respectively. The germination rate was the best in TCV mixed with S. Conclusion: The mixture of TCV (2 : 1 : 3) + 1.5% S (TCVS), was found to be the best pelleting materials for A. triphylla seeds, and seed pelleting can be labor-saving during sowing.