• 한국광학회지
• /
• 제14권2호
• /
• pp.189-193
• /
• 2003

높은 peak 값의 광 펄스 신호를 얻기 위하여 대역통과 필터(band pass filter)를 사용한 2단 구조 erbium-doped fiber amplifier (EDFA)를 구성하여 125 W peak 값과 32 ㏈ 소광비(extinction ratio)를 갖는 펄스 신호를 얻었다. 이때 pulse off power는 79 ㎽이다. pulse off power를 낮추고 소광비를 높이기 위하여 nonlinear optical loop mirror(NOLM)을 사용하였다. NOLM 을 통과한 펄스 신호는 35 W peak 값과 0.3 ㎽ pulse off power, 50.4 ㏈ 소광비를 갖는다.

• 한국컴퓨터정보학회논문지
• /
• 제14권8호
• /
• pp.51-58
• /
• 2009

본 논문에서는 오디오의 Low Peak Feature와 영상의 Color 값을 이용하여 유사한 동영상을 찾는 알고리즘을 제안한다. 동영상 검색 시 영상 데이터 전체를 이용하면 많은 시간과 저장 공간이 필요하다. 게다가 같은 영상임에도 해상도 또는 코덱이 다른 경우 전혀 다른 영상으로 인식된다. 따라서 해상도와 코덱이 달라져도 변화가 크지 않은 오디오의 파형으로부터 강인한 Peak 특징을 추출하고, 그 위치의 영상 Color 값을 비교하여 유사한 동영상을 검색하는 방법을 제안한다. 제안 방법의 성능을 확인하기 위해 2,000개의 동영상 데이터를 수집하여 실험하였으며, 그 결과 97.7%의 검색 성공률을 나타내었다.

• 원예과학기술지
• /
• 제32권3호
• /
• pp.330-339
• /
• 2014

430-470nm의 청색광 영역과 630-670nm의 적색광 영역을 5nm 간격으로 세분화한 LED를 인공광원으로 사용하고, 냉백색형광등을 대조구로 사용한 가운데 적치마상추(Lactuca sativa L. '중생종', 흥농씨앗)의 생장 및 안토시아닌 함량에 미치는 적색광 또는 청색광 LED의 피크파장에 따른 광질조사 효과를 분석하였다. 페쇄형 시스템 내에서 생장된 상추의 재배조건은 광주기 16/8h, 기온 $22/18^{\circ}C$, 습도 70%, $CO_2$ 농도 $400{\mu}mol{\cdot}mol^{-1}$로 설정하였고, 베드 면에서의 PPF를 $201{\pm}2\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 조절하였다. 정식 후 21일째에 측정된 상추의 생장 특성과 안토시아닌 함량은 청색광 또는 적색광 LED의 피크파장에 따라 유의차가 다르게 나타났다. 본 연구에서 처리된 LED의 피크파장 가운데 R1 처리구(피크파장 634nm)와 R6 처리구(피크파장 659nm)가 엽폭, 엽면적, 지상부 생체중 및 광합성속도의 증가에 효과적이었다. 한편 안토시아닌의 축적에 B5 처리구(피크파장 450nm)가 효과적이었다. 상추 잎의 안토시아닌 함량은 엽색의 hue 값이 작아지거나, 또는 SPAD 값이 커질수록 직선적인 관계를 이루면서 증가하였다. 결론적으로 본 연구에서 얻어진 피크파장 634nm와 659nm의 적색광, 450nm의 청색광은 엽채류의 생산량 증대와 안토시아닌 함량의 증진에 필요한 광질로서 활용될 것이다.

• Journal of Animal Science and Technology
• /
• 제45권2호
• /
• pp.319-326
• /
• 2003

본 실험은 쇠고기의 비 선호부위를 고도로 이용하기 위한 연구의 일환으로 쇠고기의 염통과 지라를 각종효소로 가수분해하여 얻은 분획물을 한외여과와 gel-filtration, 그리고 HPLC를 이용하여 분리 및 정제하여 얻은 펩타이드의 ACE 저해 활성을 검토한 실험이다. 쇠고기 염통과 지라에서 수용성 단백질을 추출한 다음 효소 처리하여 4, 8, 12, 24시간 동안 37$^{\circ}C$에서 배양하였다. 염통과 지라단백질의 가수분해물의 ACE 저해 활성을 측정한 결과 염통에서는 Thermolysin과 Proteinase A 효소를 12시간 혼합처리한 가수분해물에서 가장 좋은 ACE 저해 효과를 보여주었고 지라에서는 Thermolysin과 Protease 효소를 24시간 혼합처리한 가수분해물에서 ACE 저해 효과가 가장좋았다. ACE 저해효소가 가장 좋은 가수분해물을 Ultrafiltration 통해 분리하였으며, 분리 정제된 가수분해물을 Gel-filtration을 통해서 분획 하였다. 이때 염통에서는 F11, F36, F51, F63, F72의 큰 분획물을 얻었고 지라에서는 F30, F55, F71, F91에서 큰 분획물을 얻었다. 이 분획물들의 ACE 저해 활성을 측정한 결과 염통에서는 F72에서 $IC_{50}$값 0.37mg/ml로 ACE 저해 활성이 가장 좋았다. 지라에서는 F30에서 $IC_{50}$값 1.840 mg/ml로 ACE 저해 활성이 가장 좋았다. 그리고 여기서 활성이 좋은 염통을 가지고 Reversed- Phase HPLC를 이용하여 분리 한 결과 4개의 큰 피크들을 얻을 수 있었다. 그 결과 peak 1, peak 2, peak 3, peak 4의 IC50값은 각각 0.28mg/ml, 0.26mg/ml, 0.25mg/ml, 0.35mg/ml이었다. 이 peak들의 아미노산을 분석한 결과, peak 1에서는 glycine과 methionine, peak 2는 proline, cystine, methionine, peak 3는 proline, peak 4는 alanine, methionine, leucine 이 주요 구성 성분 아미노산이었다. 위 실험 결과로서, 염통과 지라에서의 ACE저해 활성은 염통이 지라보다 좋았고, 특히 Thermolysin과 Proteinase A 효소를 12시간 배양한 염통단백질 가수분해물에서 가장 좋은 ACE 저해 활성 peptide을 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.844-847
• /
• 2003

Display devices are becoming increasingly important as an interface between humans and machines in the growing information society. In display devices, PDP (Plasma Display Panel) has many advantages in that it has wide screen, wide viewing angle and is light weight, thin. In PDP driving method, if the brightness of input image is high, applying the fixed sustain pulse to the PDP panel will raise the PDP power consumption and may damages the PDP panel. To overcome these problems, the Plasma AI driving method was introduced by the Matshushita co. in Japan. The Plasma AI driving module calculates the peak value and average value of 1 frame image and adjusts the gradation and sustain pulses for 1 frame sustain. In this paper, the proposed PDP driving module is based on the Plasma AI driving module. The proposed driving module calculates peak value and average value, and the brightness distribution of 1 frame image. Using brightness distribution, the proposed driving module divides 1 frame input image into 15 image patterns. For each image pattern, minimum sustain pulses and sub-frames are used for the brightness of 1 frame image and the sustain weight for 64, 128, 192 gradation is proposed. Therefore, the sustain power consumption can be reduced.

• ETRI Journal
• /
• 제36권5호
• /
• pp.876-879
• /
• 2014

In current NAND flash design, one of the most challenging issues is reducing peak current consumption (peak ICC), as it leads to peak power drop, which can cause malfunctions in NAND flash memory. This paper presents an efficient approach for reducing the peak ICC of the cache program in NAND flash memory - namely, a program Cache Busy Time (tPCBSY) control method. The proposed tPCBSY control method is based on the interesting observation that the array program current (ICC2) is mainly decided by the bit-line bias condition. In the proposed approach, when peak ICC2 becomes larger than a threshold value, which is determined by a cache loop number, cache data cannot be loaded to the cache buffer (CB). On the other hand, when peak ICC2 is smaller than the threshold level, cache data can be loaded to the CB. As a result, the peak ICC of the cache program is reduced by 32% at the least significant bit page and by 15% at the most significant bit page. In addition, the program throughput reaches 20 MB/s in multiplane cache program operation, without restrictions caused by a drop in peak power due to cache program operations in a solid-state drive.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.818-825
• /
• 2016

The existing R-peak detection research suggests improving the distortion of the signal such as baseline variations in ECG signals by using preprocessing techniques such as a bandpass filtering. However, preprocessing can introduce another distortion, as it can generate a false detection in the R-wave detection. In this paper, we propose an R-peak detection algorithm in ECG signal, based on primitive signal in order to detect reliably an R-peak in baseline variation. First, the proposed algorithm decides the primitive signal to represent the QRS complex in ECG signal, and by scaling the time axis and voltage axis, extracts multiple primitive signals. Second, the algorithm detects the candidates of the R-peak using the value of the voltage. Third, the algorithm measures the similarity between multiple primitive signals and the R-peak candidates. Finally, the algorithm detects the R-peak using the mean and the standard deviation of similarity. Throughout the experiment, we confirmed that the algorithm detected reliably a QRS group similar to multiple primitive signals. Specifically, the algorithm can achieve an R-peak detection rate greater than an average rate of 99.9%, based on eight records of MIT-BIH ADB used in this experiment.

• 한국정보통신학회논문지
• /
• 제10권12호
• /
• pp.2243-2250
• /
• 2006

When a patient is positioned at insulated bed and practitioner is positioned at insulated floor, that condition could be a cause of lessening effect in acupuncture practice. We investigated how Ground connection and Insulation could influence on the electrical meridian potential between practitioner and patient during acupuncture practice. We treated 30 normal healthy subjects with acupuncture and measured changes in the electrical potential between the stomach meridian points ST-39 and ST-37 in response to light touch after insertion of a needle at ST-36. At first, we stimulated non-insulated needle and measured electrical potentials for non ground, patient ground only, practitioner ground only, all ground respectively. Then we used insulated needles and measured same as above. Non-insulated all ground subject elicited positive mean potential $44.6{\pm}19.2{\mu}V$ and showed $181.4{\pm}59.7{\mu}V$ peak to peak potential. Practitioner ground only showed negative mean potential of $51.5{\pm}9.3{\mu}V$ and $367.4{\pm}27.8{\mu}V$ of peak to peak potential. Patient ground only revealed no mean potential of $2.9{\pm}1.3{\mu}V$, $16.4{\pm}11.9{\mu}V$ of peak to peak potential. All ground showed no mean potential of $1.6{\pm}0.7{\mu}V$, $3.3{\pm}1.9{\mu}V$ of peak to peak potential. In case of Insulated condition, there elicited no mean potential. Non ground and Practitioner only showed weak value of peak to peak potential as $7.8{\pm}2.6{\mu}V$ and $8.4{\pm}2.5{\mu}V$ each. But patient only and all ground showed no potential as $4.7{\pm}2.2{\mu}V$, $3.4{\pm}2.2{\mu}V$, respectively. Therefore, Ground connection modulate the energy transfer course between practitioner and patient. Insulation block energy transfer but static electrical impulse between practitioner and patient.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.85-92
• /
• 2018

PURPOSES : In this study, analyze the characteristics of IOC indicator 'threshold' which is needed when evaluating the traffic signal operation status with ESPRESSO in various grade road traffic environment of Seoul metropolitan city and derive suggested value to use in field practice. METHODS : Using the computerized database program (Postgresql), we extracted data with regional characteristics (Arterial, Collector road) and temporal characteristics (peak hour, non-peak hour). Analysis of variance and Duncan's validation were performed using statistical analysis program (SPSS) to confirm whether the extracted data contains statistical significance. RESULTS : The analysis period of the main and secondary arterial roads was confirmed to be suitable from 14 days to 60 days. For the arterial, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 25 km/h as the critical speed for AM peak hour and night non peak hour. As for the collector road, it is suggested to use 20 km/h as the critical speed for PM peak hour and weekly non peak hour. It is suggested to use 30 km/h as the critical speed for AM peak hour and night non peak hour. CONCLUSIONS : It is meaningful from a methodological point of view that it is possible to make a reasonable comparative analysis on the signal intersection pre-post analysis when the signal operation DB is renewed by breaking the existing traffic signal operation evaluation method.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.59-67
• /
• 2018

Various pilotis are installed in the lower part of high rise buildings. Strong winds can generate sudden airflow around the pilotis, which can cause unexpected internal airflow changes and may cause damage to the exterior of the piloti ceiling. The present study investigates the characteristics of peak wind pressure coefficient for the design of piloti ceiling exteriors by conducting wind pressure tests on high rise buildings equipped with penetration-type and end-type pilotis in urban and suburban areas. The minimum peak wind pressure coefficient for penetration-type piloti ceilings ranges from -2.0 to -3.3. Minimum peak wind pressure coefficient in urban areas was 30% larger than in suburban areas. In end-type piloti ceilings, maximum peak wind-pressure coefficient ranges from 0.5 to 1.9, and minimum peak wind-pressure coefficient ranges from -1.3 to -3.6. With changes in building height, peak wind pressure coefficient decreases as the aspect ratio increases. Peak wind-pressure coefficient increases with taller pilotis. On the other hand, when piloti height decreases, the absolute value of the minimum peak wind pressure coefficient increases.