• Journal of the Korea Institute of Building Construction
• /
• v.14 no.6
• /
• pp.571-581
• /
• 2014

In the present study, hollow precast concrete wall (PC Double Wall) for staircase construction was developed. Comparing the conventional walls, the PC Double Wall can be reduced the lift weight using hollow core and improves the integrity between the PC members. The cross-section and re-bar details of the PC Double Wall were developed considering precast concrete manufacturing, constructability, and the structural safety. Particularly, a form system was developed to manufacture thin and hollow core PC wall efficiently. A mock-up test for a staircase using the PC Double wall was performed to verify the constructability and integrity of the PC walls. The test result verified that joint deformation and cracking did not occur as showing good constructability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.73-92
• /
• 1997

A modular exponentiation( E$M^{$=varepsilon$}$mod N) is one of the most important operations in Public-key cryptography. However, it takes much time because the modular exponentiation deals with very large operands as 512-bit integers. Modular exponentiation is composed of repetition of modular multiplications, and the number of repetition is the same as the length of the addition-chain of the exponent(E). Therefore, we can reduce the execution time of modular exponentiation by finding shorter addition-chain(i.e. reducing the number of repetitions) or by reducing the execution time of each modular multiplication. In this paper, we propose an addition-chain heuristics and two fast modular multiplication algorithms. Of two modular multiplication algorithms, one is for modular multiplication between different integers, and the other is for modular squaring. The proposed addition-chain heuristics finds the shortest addition-chain among exisiting algorithms. Two proposed modular multiplication algorithms require single-precision multiplications fewer than 1/2 times of those required for previous algorithms. Implementing on PC, proposed algorithms reduce execution times by 30-50% compared with the Montgomery algorithm, which is the best among previous algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.415-425
• /
• 2000

An open architecture manufacturing strategy intends to integrate manufacturing components on a single platform so that a particular component can be easily added and/or replaced. Therefore, the control scheme based upon the open architecture concept is hardware-independent. In this paper, a modular and object oriented approach for a PC-based open robot control system is investigated. A standard reference model for robot systems, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then, a PC-based Open Robot Controller(PC-ORC), which can reconfigure robot control systems in various production environments, is developed. The PC-ORC is built upon the object-oriented method, and allows an easy implementation and modification of various modules. The PC-ORC consists of basic softwares, application objects, and additional hardware device on the PC Platform. The application objects are: sequencer, computation unit, servo control, ancillary equipment, external sensor control, and so on. In order to demonstrate the applicability of the PC-ORC, the proposed PC-ORC configuration is applied to an industrial SCARA robot system.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.179-187
• /
• 2010

The purpose of this study is to suggest the advancement of the competitive power of Korean electronics and automobile industries from a product-architectural point of view. There are two types for the characteristics of parts. They are the modular type and the integral type. The former is very independent between one subsystem and another, whereas the other is very dependent. The distinction of product architecture makes them different for the ability to organize developing products suited for the product manufacturing. The organizing ability is generally divided into the abilities of 'modulation integration' and 'selection assembly'. For the integral products such as cars, the integration ability is important between an enterprise and another, as well as between a part and another. However, the modular products such as a PC need the ability to select and effectively organize optimal parts or enterprises. The strategy raising product competitiveness is pursued by synthesizing 'design manufactu-turing strategy' for the product architecture and 'customer value strategy' for the customer values.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.173-182
• /
• 1995

모듈라 멱승(modular exponentiation) 연산은 암호학에서 기본적이고 중요한 연산이다. 그러나, 이는 다정도 정수(multiple precision integer)들을 다루기 때문에 그 연산시 간이 무척 많이 걸리므로 이를 단축시킬 필요가 있다. 모듈라 멱승 연산은 모듈라 곱셈(modular multiplication)의 반복으로서, 전체 연산시간을 단축시키기 위해서는 모듈라 곱셈의 수행시간을 단축시키거나, 모듈라 곱셈의 반복횟수를 줄이는 것이 필요하다. 본 논문에서는 모듈라 곱셈을 빠르게 수행하기 위한 알고리즘 두 개를 제안한다. 하나는 서로 다른 두 수의 모듈라 곱셈 알고리즘이고, 다른 하나는 모듈라 제곱을 빠르게 수행하는 알고리즘이다. 이 둘은 기존의 모듈라 곱셈 알고리즘들에 비해 각각 절반과, l/3가량의 단정도 곱셈(single-precision multiplication)만을 필요로 한다. 실제로 PC상에서 구현한 결과 각각 100%와 30%의 속도향상을 보인다.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.7-16
• /
• 2022

Purpose: This study aims to establish the basic directions of the modular airborne infection isolation(AII) ward. Considering a specific function and purposed use as a modular AII ward, it is a chance to derive an address of current modular technology by overview the limitation and improvement of the existing modular architecture. Methods: In addition to the literature analysis on the configuration system of mobile hospitals, research cases on the operational effectiveness of the domestic and foreign mobile construction systems are analyzed. Results: In order to meet the various and strict space guidelines of the AII ward and a chance to improve limitations of uniformed existing modulars, AII modular the negative pressurized care setting should be minimized a structural restriction for reflecting its system on a architectural plan. For this unique requirements, it could be possible to apply various space boxes called infill box which needs to secure a large-scale space. So, a rahmen structure system could be adaptable for this purpose. A dead space between beams of the rahmen structure is to be used for MEP installation. Partial separation, dismantling, and repair should be possible by separating the MEP and infill box from the structure. The infill box must keep 3.5m width under the current Road Traffic Act. Implications: It is necessary to utilize and develop an improved construction method that can reduce the problems of existing steel modular and PC modular.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.5
• /
• pp.331-340
• /
• 2017

This study was performed in order to develop of the new modular construction system. For the modular construction method that is currently applied in the country, it is very expensive in terms of material costs and fire resistance because it uses only the steel C-type beam. In order to overcome this, and the practical application of new steel-PC hybrid module construction system. Improvement and development of the cross-section of the structural beam member in order to be carried out first. An experiment was carried out by making three specimens. Experiment result, the composite beam was dominated by the horizontal shear failure. It was evaluated through a nonlinear analysis and experimental & theoretical for the structural performance the composite beam member.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.230-231
• /
• 2021

In this study, Dr. Bae Kyu-woong of the Korea Institute of Construction Technology developed a concrete module that was lightweighted to 1700kN with KC modules and met housing performance standards. It solves Construction lifts problem that was the limit of the PC module, and is an innovative model that greatly improves Construction period and economics with boxed modules, and is manufactured in the factory by extruded molding in vibration, noise, fireproofing standards, etc., and has the advantage of excellent precision and high strength. Therefore, if the framing house of a precast concretecan only be standardized in construction, its potential for growth will be endless. To do this, standardization, standardization, and modularization of the design are essential.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.245-250
• /
• 1995

Steel effects on creep deformation of prestressed concrete structues are investigated by a parametric study. Prestressed steel ratio, Prestressed steel distribution, initial flexural stress gradient, and modular ratio are selected as parameters. Sectional analysis for the beam section of parameter combination is performed to find curvatrue change due to creep. Based on the investigation, long-term curvature formulas from regression analysis are proposed. Application of the furmulas to simply supported prostressed concrete beam shows the effect of steel on deflection.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.219-222
• /
• 2002

In this paper, 3D image display system is constructed under PC environment and programed based on modular programming by using visual C)1. The hole procedures are composed of data preparation, 3D display over transformation and scaling.