• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.297-300
• /
• 1986

A trial paste fertilizer for rice was manufactured by a developed process using major raw materials of waste liquid from glutamic acid fermentation, urea, phosphoric acid, diammomium phosphate and potassium chloride with potassium hydroxide for pH adjust and both glycerin and $HB_4O$ for enhancing and maintaining dispersion of paste. The ratios of N, $P_2O_5$ and $K_2O$ for trial products of paste fertilizer were 10:15:13 for Japonica var., and 12.5:15:13 for Indica var., and it was 6.0 in pH and 1.45g/cc in specific gravity.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.290-300
• /
• 2017

Objectives: This study investigated the removal efficacy and cytotoxicity of a newly developed calcium hydroxide paste (cleaniCal, Maruchi) using N-2-methyl-pyrrolidone (NMP) as a vehicle in comparison with ApexCal (Ivoclar Vivadent) and Calcipex II (Nishika), which use different vehicles such as polyethylene glycol and propylene glycol, respectively. Materials and Methods: Thirty maxillary premolars with oval-shaped canals were divided into 3 groups and the teeth were filled with one of the pastes. After removal of the paste, micro-computed tomographic (${\mu}$-CT) imaging was obtained to assess the volume of residual paste in the root canal of each tooth. The teeth were then split longitudinally and the area of the paste-coated surface was evaluated by stereomicroscopy. The cytotoxicity of each product was assessed using an agar overlay assay. The effect of each vehicle on cell viability was evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The data were analyzed using one-way analysis of variance and Tukey's tests to detect any significance (p < 0.05). Results: In the ${\mu}$-CT and stereomicroscopic analysis, cleaniCal exhibited less remnants of medicament than ApexCal and Calcipex. cleaniCal showed a higher cytotoxicity than the other pastes in the agar overlay assay. Furthermore, NMP exhibited lower cell viability compared to the other vehicles. Conclusions: cleaniCal showed better removal efficacy compared to the other products. However, clinicians should be aware of the higher cytotoxicity of the NMP-based material and consider its possible adverse effects on periradicular tissue when it is overfilled.

• The Journal of the Korean dental association
• /
• v.50 no.9
• /
• pp.574-585
• /
• 2012

Purpose : This study was performed to evaluate the healing response around the root perforation restorative material. Materials and Methods : Four beagle dogs were used for experimental study. Endodontic treatment was performed at four maxillary premolars and artificial perforation was formed at furcation area of pulp chamber. Canal was filled with gutta percha cone and the perforation was sealed with MTA at group 1. At group 2, canal was filled and the perforation was sealed with dentin paste. Tooth paste was fabricated using extracted human teeth. Histologic examination of furcation area was performed 2, 4, 8 and 12 weeks after experiment. Results : New trabecular bone formation was observed around the MTA and tooth paste. Lamellar bone was observed as time is over. There were no inflammatory reaction in both groups. Conclusion : There is a possibility which endodontic filling material can be developed using extracted teeth.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.505-509
• /
• 2016

This study was conducted to examine the effectiveness of various dressing materials applied to tree wounds in Korea. Significantly higher wound closure rates than those of controls were found when thiophanatemethyl paste (Topsin Paste$^{(R)}$) was applied to Ginkgo biloba, Zelkova serrata, and Prunus yedoensis; lanolin to Z. serrata and P. yedoensis; and tebuconazole paste (Silvacur$^{(R)}$) to P. yedoensis. However, significantly lower wound closure rates than those of controls were found when petroleum jelly (Vaseline$^{(R)}$) was applied to G. biloba, Z. serrata, and P. yedoensis. It was noted that the wounds of Z. serrata and P. yedoensis treated with petroleum jelly expanded due to the death of cambium located at the edge of the wounds. Wound closure rates applied with adhesive - non-toxic to human body (Okong bond$^{(R)}$) were also significantly lower than those of controls in Z. serrata. Pinus densiflora showed no reaction to any experimental wound dressing because of resin secreted from the exposed cambium.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.51-56
• /
• 2014

After the preparation of low-cost conductive paste containing Ag-coated Cu flakes, thermal conductivity and electrical resistivity of the paste were measured with different curing conditions. Under air-curing conditions, the thermal conductivity of the cured sample increased with an increase of curing time from 30 to 60 min. After identical curing time of 60 min, the sample cured under nitrogen indicated more enhanced thermal conductivity than that cured under air, approaching that of paste containing pure Ag flakes. Under air-curing conditions, meanwhile, the electrical resistivity of the cured sample increased with an increase of curing time from 30 to 60 min. After identical curing time of 60 min, however, the sample cured under nitrogen indicated extremely enhanced electrical resistivity ($7.59{\times}10^{-5}{\Omega}{\cdot}cm$) in comparison with that cured under air.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.480-485
• /
• 2016

This study was conducted to develop food for the elderly, which is easier to chew and swallow, using gelification. Various foods for the elderly with chewing and swallowing difficulties were used for sensory assessment. The sensory panel consisted of 10 dieticians (10 women) working in nursing care facilities. The sensory optimal composite recipes were determined by the central composite design (CCD). The optimum formulation of hot pepper paste stir fried pork calculated by the numerical and graphical method was 1.48 g of sugar and 18.97 g of hot pepper paste. The optimum formulation of seasoned spinach was 8.0 g of sesame oil and 5.41 g of soy sauce. Moisture content, hardness, and adhesiveness of hot pepper paste stir fried pork was 76.49%, 2.50, and -1.20, respectively. Moisture content, hardness, and adhesiveness of seasoned spinach was 83.48%, 2.27, and -1.17, respectively. This study provides the basic materials for the development of easily chewable and swallowable foods for the elderly, which can reduce the risk of food going down the wrong pipe, and the preference can be improved by eating solid food instead of porridge or liquid food. The development of food for the elderly, which takes the difficulties in chewing and swallowing among the elderly into consideration and reflects their preference and has sufficient amount of nutrients, is important to enable the elderly to enjoy their meals and it is one of the biggest challenges in Korea, as Korean society is aging rapidly.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2009

Mechanical and electrical properties of silver stabilizer layer of coated conductor, which as prepared with nano silver paste as starting materials, have been investigated, Nano silver paste was coated on a YBCO film by dip coating process at a diping speed of 20m/min. Coated film was dried in air and heat treated at $400{\sim}700^{\circ}C$ in an oxygen atmosphere. Adhesion strength between YBCO and silver layer was measured by a tape est(ASTM D 3359). Hardness and electrical conductivity of the samples were measured by pencil hardness test (ASTM D 3363) and volume resistance test by LORESTA-GP (MITSHUBISHD, respectively. The sample heat-treated at $500^{\circ}C$ showed poor adhesion 1B, but samples heat treated at higher than $600^{\circ}C$ showed enhanced adhesion of 5B. The silver layer heat-treated at $700^{\circ}C$ showed the high hardness value larger than 9 H, low volume resistance, surface resistance value as well as superior current carrying capacity compared to sputtered silver. SEM observations showed that a dense silver layer was formed with a thickness of about $2{\mu}m$. Dip coated silver layer prepared by using nano silver paste showed superior electrical and mechanical characteristics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.490.2-490.2
• /
• 2014

Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.

• Computers and Concrete
• /
• v.15 no.6
• /
• pp.903-919
• /
• 2015

The flow of freshly mixed cement-based material shows thixotropy, which implies some difficulties on robust measurement of its rheological properties: The flow curve of thixotropic materials depends on the used protocol. For examples, higher viscosity is obtained when the rate of shear strain is more quickly increased. Even though precise measurement and modelling of the concrete rheology needs to consider the thixotropic effect, engineers in the concrete field prefer considering as a non-thixotropic Herschel-Bulkley fluid, even more simply Bingham fluid. That is due to robustness of the measurement and application in casting process. In the aspect of simplification, this papers attempts to mimic the thixoropic flow by the non-thixotropic Herschel-Bulkley model. Disregarding the thixotropy of cement based materials allows us to adopt the rheological concept in the field. An optimized protocol to measure the Bingham parameters was finally found based on the accuracy and reproducibility test of cement paste samples, which minimizes the error of simulation stemming from the assumption of non-thixotropy.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.271-274
• /
• 1999

We are investigating epitaxially grown YBa$_2Cu_3O_x$(123) on MgO single crystal by partial melting process for high power application. After fabricating of BaCuO$_2$(011), Y$_2BaCuO_5$(211) powder, we made YBa$_2Cu_3O_x$(123) Paste with just mixing of (211), (011) and CuO(001) powders. Screen printing method was used to coat YBa$_2Cu_3O_x$(123) paste on MgO single crystal. To reduce the reaction in low temperature, rapid heating was conducted at partial melting temperature. The film was analysed with the difference of cooling-rate, thickness, reaction temperature by XRD, SEM, in-plane alignment, out-of-plane alignment, temperature-resistivity characteristics.