• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.109-112
• /
• 2008

The purpose of this study is to find out the characteristics of disasters caused by typhoons passing through the sea area around the Korean Peninsula. It analyzed two cases, that is, in WEST and EAST cases. These include the typhoons passing through the Yellow Sea, west of the Peninsula and East Sea, east of the Peninsula without landing on the Peninsula. FCM (Fuzzy Clustering Method) analysis was performed on typhoons affecting the Korean Peninsula from 1951 to 2006. The analysis shows that WEST case's cluster has the curved track of NE-S, and EAST case's cluster has the straight track of NE-SW. Typhoons that pass through the Yellow Sea have little change in frequency and the weak intensity. On the other hand, the frequency and the intensity of typhoons passing through the East Sea show the increasing trend. The characteristic of disasters by typhoons affecting the Korean Peninsula from 1973 to 2006 appears differently for each case: EAST cases caused significant damage in flooding, while WEST cases did damage in houses, ships, roads, and bridges. Rainfall amount and maximum wind speed data are analyzed in order to understand the impact of the typhoons, and the result indicates that the WEST cases are influenced by the wind, and East cases by precipitation. The result of this study indicates that the characteristic of disasters is distinctive according to the Typhoon's track. If applied to establish the disaster prevention plan, this result could make a contribution to the damage reduction.

• 한국환경복원기술학회지
• /
• 제3권3호
• /
• pp.113-125
• /
• 2000

This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. The strategy prospects of environmental restoration in Japan were summarized as follows : 1. When we establish the long term erosion control planning, we should make detail planning after considering of a certain block of watershed units. Because most of the disaster is caused by soil movement which was occurred by water contents. 2. Nowadays, the general torrent erosion control planning system in Japan focused on reducing the sediment such as by placement of erosion control facility and by restoration of afforestation, after calculation of several factors including expected amount of sediment, and the different amount of planned sediment and allowable sediment. 3. In the past, the goal of forest conservation and erosion control planing was to fix the amount of soil movement by construction of permanent facilities. While, the goal of forest conservation and erosion control planning in the future needs to change the techniques to a small and middle scale's soil movement which could prevent soil movement from large scale of soil disasters, but allow soil movement effectively. Also, it is considered to change erosion control dams from non passing type to passing type. 4. Restoration of stream-side ecology, erosion control for the conservation of ecology should be planned and conducted cautiously based on concepts of ecology conservation and development of environmentally sound techniques.

• 한국건축시공학회지
• /
• 제20권4호
• /
• pp.313-319
• /
• 2020

본 연구에서는 70MPa급 고강도 콘크리트에서 유공유리분말(HGP)의 적용성을 확인하기 위하여 HGP 사용량에 따라서 프레쉬 상태와 경화 상태의 물성을 검토하였고, 그 실험결과는 다음과 같다. 유동 특성은 HGP의 사용량이 증가할수록 슬럼프플로가 약간 증가하는 하는 것으로 나타났고 T₅₀₀은 HGP의 사용량이 증가할수록 약간 단축되었으며, 철근 통과성은 HGP의 볼베어링 효과로 인해 개선되는 것으로 나타났다. 특히 사용량 1.0kg/㎥에서 통과성 0등급으로 가장 양호한 철근통과성을 발휘하였다. 레올로지 특성으로는 HGP 1.0kg/㎥에서 소성점도가 Plain 대비 40% 정도 감소하여 HGP가 고강도 콘크리트의 소성점도를 낮추는 효과가 있는 것으로 확인되었다. 하지만 HGP 2.0kg/㎥에서는 1.0kg/㎥보다 오히려 소성점도가 크게 나타났다. 실험을 통하여 HGP가 고강도 콘크리트의 작업성 향상에 도움이 되는 것을 확인할 수 있었으며 사용량 1.0kg/㎥ 이 가장 적절한 것으로 판단된다. 또한 HGP가 콘크리트 압축강도에 영향을 미치지 않는 것으로 확인되었다.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.896-900
• /
• 2013

In this paper, we develop a dust detection sensor system capable of identifying types of dust for an improvement of a robot vacuum cleaner. The dust detection sensor system is composed of a set of infra-red sensors: a single transmitter and multiple receivers. Given the fixed amount of light transmitted from the transmitter, the amount of light coming in multiple receiver sensors varies, depending on the type and density of dust that is passing between the transmitter and the receivers. Therefore, the type of dust can be identified by means of observing the change of the amount of light from the receiver sensors. For experiments, we use two types of dust, rice and sesame, and validate the effectiveness of the proposed method.

• Genomics & Informatics
• /
• 제6권3호
• /
• pp.157-159
• /
• 2008

Multiple sequence alignment (MSA) is the most important step for many of biological sequence analyses, homology search, and protein structural assignments. However, large amount of data make biologists difficult to perform MSA analyses and it requires much computational time to align many sequences. Here, we have developed a simple and fast web alignment tool for aligning, editing, and visualizing large amount of sequence data. We used a cluster server installed ClustalW-MPI using web services and message passing interface (MPI). It also enables users to edit multiple sequence alignments for manual editing and to download the input data and results such as alignments and phylogenetic tree.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.584-588
• /
• 1997

A new device to accurately deliver small amount of modifier into supercritical carbon dioxide fluid is described. Carbon dioxide, the most widely used mobile phase in supercritical fluid chromatography, is a relatively non-polar fluid, and hence the addition of small amount of polar modifiers could be necessary to migrate polar solutes. In this work, supercritical CO₂and modifier are delivered from the pump to a 100 μL mixing chamber in which a small magnetic bar is rotating. After passing through the mixing chamber, supercritical CO₂is changed to a new mobile phase with different polarity. The amount of modifier added into supercritical CO₂is measured by an amperometric microsensor, which is prepared from a thin film of perfluorosulfonate ionomer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.72-73
• /
• 2021

For the development of high-fluidity concrete using low-binder, The effect of the use of the developed acrylic viscosity agent on the physical properties of concrete evaluated. The amount acrylic viscosity agent used was 1.5%, 1.7%, and 2.0% based on the binder amount of 400kg/m3, and slump flow test, slump flow 500mm arrival time measurement, air volume measurement, and U-Box passing test were conducted to determine the effect of the physical properties of concrete. it was judged that 1.5% of the acrylic viscosity agent used in high-fluidity concrete using low-binder was most suitable.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.129-130
• /
• 2021

For the development of high-fluidity concrete using low-binder, The effect of the use of the developed acrylic viscosity agent on the physical properties of concrete evaluated. The amount acrylic viscosity agent used was 0.28%, 0.29% and 0.30% based on the binder amount of 350kg/m³, and slump flow test, air volume measurement, U-Box passing test and strength compressive were conducted to determine the effect of the physical properties of concrete. it was judged that 0.29% of the cellulose type viscosity agent used in high-fluidity concrete using low-binder was most suitable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1420-1423
• /
• 1996

This paper presents the implementation of network for automation using fieldbus. The RS-485 and twisted pair are used in layer 1 and medium, respectively. We implement FDL(Fieldbus Datalink Layer) using C-language and use token-bus network. The network consists of polling system and token passing system. The amount of transmitted data frames is evaluated with various transmission speeds that affect the system stability.

• Annals of Clinical Neurophysiology
• /
• 제1권1호
• /
• pp.47-54
• /
• 1999

The Doppler in neurosonologic examination could be applied to blood flow to determine its movement, the direction of its movement, and how fast it is. Indicies of the Doppler study denoted velocity, direction, and amount of RBC in the examined vessel. Systolic. diastolic, and mean blood flow velocities represent velocity of RBCs in a sample volume. Blood flow direction to the probe means direction of RBC to the probe. Size of amplitude displays toe amount of the RBCs passing the sample volume. Spectral broadening means presence of turbelence. The RBC movements and hemodynamics at the examined vessels can be estimated by analysis of Doppler indicies The formation and meaning of each of neurosonologic Doppler study is described in the present review.