• Bulletin of the Korean Chemical Society
• /
• 제21권4호
• /
• pp.441-445
• /
• 2000

A new series of three ring type liquid crystalline compounds containing partially fluorinated alkenyl or alkyl side chains together with fluorine substituted cyclohexylbiphenyls were designed and synthesized in this study. The structures of synthe sized compounds were established by 1 H, 13 C and 19 F NMR spectroscopy. The phase transition temperatures of fluorinated liquid crystalline compounds were determined by cross-polarizing mi-croscopy equipped withhot stage. All compounds were found to have nematic liquid crystalline phase with rel-atively low phase transition temperature and wide liquid crystalline temperature range. The dependence of phase transition temperatures on the chainlength falls into three categories; (a) decreasing transition tempera-tures for 4-fluoro-4'-[4-fluoro-4-(1-fluoroalkyl)cyclohexyl]biphenyl (15) series, (b) higher transition tempera-tures for odd numbered chains for 4-fluoro-4'-[4-fluoro-4-(1-fluoroalk-1-enyl)cyclohexyl]biphenyl (14) series, (c) higher transition temperatures for even numbered chains for 4-[4-(1,2-difluoroalk-1-enyl)-4-fluorocyclo-hexyl]-4'-fluorobiphenyl (16) series.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.393-398
• /
• 2005

The stability constants for the diaza-18-crown-6 ethers 2-6 and alkali metal cations ($Na^+,\;K^+,\;Rb^+\;and\;Cs^+$) were determined using potentiometry in 95% methanol. For each metal ion the stability constants of the partiallyfluorinated ligands 3-6 were larger than that of the non-fluorinated ligand 2, which might reflect an interaction between fluorine atoms and alkali metal cations. The stability constant of the ligand 4 was larger than that of the ligand 5 for each metal cation tested. This finding was also supported by the results of cation-induced chemical shifts in $^1H-,\;^{19}F$-NMR and extraction experiment. The potentiometry and NMR results as well as the X-ray crystal structures revealed that the position and number of fluorine atoms in the benzyl side arms was crucial for the enhanced interaction between a ligand and an alkali metal.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.41-48
• /
• 2011

The wettabilities of the partially fluorinated polymers (ethylene-tetrafluoroethylene copolymer (ETFE), ethylenechlorotrifluoroethylene copolymer (ECTFE), and poly(vinylidene fluoride) (PVDF)) were investigated by contact angle measurements. Zisman plots for ETFE and ECTFE exhibited linear relationships, while the Zisman plot for PVDF showed a slight curvature, which was interpreted to indicate strong non-dispersive interactions between the surface and the contacting liquids. The Lifshitz-van der Waals forces of the fluoropolymers were estimated to increase in the order of ETFE < PVDF $\ll$ ECTFE. An evaluation of the polar or "acid-base" interaction energies showed that PVDF, which possesses the most acidic hydrogens among the examined fluoropolymers, has the strongest acid-base interactions.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.175-183
• /
• 2015

A series of fluorinated aromatic poly(hydroxyamide)s (PHAs) were synthesized by direct polycondensation of diacides containing 2,6-dimethylphenoxy group and quinoxaline ring in the main chain with 2,2-bis-(3-amino-4-hydroxyphenyl) hexafluoropropane. The PHAs had relatively low inherent viscosities in the range of 0.35~0.43 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs exhibited excellent solubility in aprotic solvents such as NMP, DMAc, DMF and DMSO as well as in common organic solvents such as pyridine, THF, and m-cresol at room temperature. However, the poly(benzoxazole)s (PBOs) were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid. The PBOs showed glass transition temperatures between 233 and $284^{\circ}C$ by DSC and maximum weight loss temperatures in the range of $536-546^{\circ}C$ by TGA.

• 멤브레인
• /
• 제21권1호
• /
• pp.1-12
• /
• 2011

연료전지용 프로톤 전도성 고분자로서 분지체 함량이 조절된 부분불소계 Sulfonated poly(arylene ether sulfone) 이오노머 블록공중합체막의 합성 및 특성에 관하여 연구하였다. 분지형태의 부분불소계 블록고분자 전해질막 제조를 위해 설폰화 활성이 높은 단량체, 설폰화 활성이 낮은 단량체 그리고 분지체를 합성하였고, 블록형성을 위해 biphenyl계 올리고머를 합성하였다. 분지체의 양에 따른 막 특성변화를 고찰하기 위해, biphenyl계 올리고머와 sulfonyl계 단량체의 몰 비를 4 : 6으로 고정하고 분지체의 함량을 2 mol%까지 늘려가면서 중부가형태의 열중합을 통하여, 다른 분지체의 함량을 가지는 공중합체를 얻었다(BBC-40Bx). 제조된 분지형태의 공중합체들을 chlorosulfonic acid (CSA)를 사용하여 후설폰화(post-sulfonation)하였다(SBBC-40Bx). 제조된 화합물, 단량체, 분지체 및 중합체들은 $^1H$-NMR, $^{19}F$-NMR 및 FT-IR분석을 통하여 성공적으로 합성되었음을 확인하였다. 분지형태의 블록공중합체(SBBC-40Bx)는 분지체의 함량이 증가함에 따라 이온교환능력(IEC), 함수율 및 이온전도도가 증가하는 경향을 보였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.73-76
• /
• 2008

• 폴리머
• /
• 제28권1호
• /
• pp.24-34
• /
• 2004

여러 종류의 불소고분자내로 다양한 유기용매들의 동적 흡수 평형 (혹은 팽윤) 실험을 진행하였다. 불소로 포화된 고분자는 이상적 흡수 거동을 나타내었으나 부분적으로 치환된 불소고분자는 최종 흡수단계에서 가속화되는 비이상적 흡수 거동을 나타내었다. 회귀분석에 의해 픽-확산 거동으로부터 벗어나는 정도를 최소자승법 (즉, ∑ ［측정값-예측값］$^2$)으로 구한 결과 -퍼플루오로알콕시 공중합체, 폴리(에틸렌 테트라플루오로에틸렌) 공중합체, 폴리(비닐리덴 플루오라이드), 폴리(에틸렌 클로로트리플루오로에틸렌) 공중합체에 대해 각각 3.0${\times}$$10^{-4}$, 1.75${\times}$$10^{-3}$, 8.68${\times}$$10^{-3}$, 1.75${\times}$$10^{-2}$의 수치를 나타내었다. 응력-변형 실험 결과 비-픽 확산 거동은 팽윤된 불소고분자의 기계적 성질 (탄성률과 인장 강도) 변화와 상관관계가 있음을 알 수 있었다. 비이상적 흡수 거동의 주요 원인은 치환된 수소 혹은 염소와 불소원자 간의 전기음성도 차이에 기인한 사슬 간극성 결합 구조가 침투성분의 가소화 효과에 의해 비선형적 이완이 진행되면서 비-픽 확산이 진행되기 때문이다. 따라서 부분적으로 치환된 불소고분자를 차단성 혹은 선택적 투과기능이 요구되는 분야에 적용할 때 가소화 성분에 대한 용해 및 확산 거동에 대한 신중한 고찰이 필요하다.

• 폴리머
• /
• 제34권2호
• /
• pp.137-143
• /
• 2010

불소 관능기인 perfluorocyclobutane(PFCB)기를 함유하는 설폰화된 부분 불소계 poly(biphenyleneco-sulfone)ether 공중합체(SPBS-X)를 제조하였다. 제조과정은 trifluorovinylether그룹을 양 말단에 포함하는 단량체의 합성, 고리화부가 반응형태의 열중합 그리고 후설폰화(post-sulfonation)의 3단계 합성과정을 통하였다. Trifluorovinylether그룹을 양 말단에 포함하는 biphenyl계와 sulfonyl계 단량체를 합성하였고, biphenyl계의 함량을 20 mol%에서 60 mol%까지 조절하면서 고리화부가 반응형태의 열중합을 통해 랜덤 공중합체가 얻어졌다(PBS-X). 후설폰화는 chlorosulfonic acid(CSA)를 사용하여 수행되었으며, 이를 통해 다양한 설폰화도를 가지는 고분자를 합성하였다. $^1H$-NMR, $^{19}F$-NMR 및 FT-IR 분석을 통하여, 제조된 화합물, 단량체 및 중합체들이 성공적으로 합성되었음을 확인하였다. 상온에서 CSA에 대해 설폰화 활성을 가지는 biphenyl기의 함량이 증가함에 따라 이온교환능력(IEC), 함수율 및 이온전도도가 증가하는 경향을 보였고, SPBS-60의 경우 넓은 온도범위(25~80 $^{\circ}C$)에서 Nafion$^{(R)}$-115보다 높은 이온전도도(80 $^{\circ}C$: 0.08 S/cm at RH 100%)를 나타내었다.

• 전기화학회지
• /
• 제12권3호
• /
• pp.219-233
• /
• 2009

Mobile devices in the next generation such as camera, cell phone, network, Note PC, etc. require higher power and energy sources due to convergences of various functions. Direct methanol fuel cell (DMFC) has been focused as an attractive power source, but there are critical issues involved in its commercialization with regard to the core technologies of materials, components, and system. The requirements of key technologies are differentiated from applications and fuel supply methods. Here, the roles of the proton-conducting membrane are discussed and the current status of DMFC systems is discussed in terms of proton conductivity, methanol permeability, and water management. Materials such as perfluorinated and partially fluorinated membranes, hydrocarbon membranes, composite membranes, and other modified ionomers have been studied. These would explain the critical issues of DMFC and the role of membranes for commercialization.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1515-1518
• /
• 2010

Regio- and diastereoselective 1,3-dipolar cycloaddition reactions of nitrones {(Z)-${\alpha}$-phenyl-N-methylnitrone (1a) and (Z)-${\alpha}$-propyl-N-butylnitrone (1b)} with electron-deficient perfluoro-2-methyl-2-pentene (2) lead to novel isoxazolidines {5-fluoro-5-pentafluoroethyl-4,4-bis-trifluoromethyl-2-methyl-3-phenyl-isoxazolidine (3a) and 2-butyl-5-fluoro-5-pentafluoroethyl-4,4-bis-trifluoromethyl-3-propyl-isoxazolidines (3b) respectively} as major constituents. These derivatives were characterized by IR, $^1H$ and $^{19}F$ NMR, GC-MS and NOE measurements, and the absolute structure of 3a was confirmed by X-ray crystallography.