• 품질경영학회지
• /
• 제27권2호
• /
• pp.237-250
• /
• 1999

Response surface analysis has been a popular tool conducted by engineers in many processes. In this paper, response surface function, named partial least squares response surface function is proposed. Partial least squares response surface function is a function of partial least squares components and the response surface modeling is used in either a first-order or a second-order model. Also, this approach will have the engineers be able to do the response surface modeling and the process optimization even when the number of experimental runs is less than the number of model parameters. This idea is applied to the nondesign data and an application of partial least squares response surface function to the process optimization is considered.

• Communications for Statistical Applications and Methods
• /
• 제28권5호
• /
• pp.493-510
• /
• 2021

The present article endeavours to develop partial optional randomized - response technique (PORT) to deal with sensitive issues in presence of non-response in successive sampling. Calibration techniques have been embedded with PORT to estimate sensitive population mean at current move in two move successive sampling in presence of non-response. Optimum calibration weights are computed at each move with the aid of constraints based on auxiliary information. Detailed properties of the proposed estimators have been discussed. Possible cases in which non-response may creep at two moves has been explored. The proposed technique has been compared with the modified existing technique. Simulation results indicate that the proposed technique is more efficient than existing, modified one. Suitable recommendations are forwarded.

• 한국지진공학회논문집
• /
• 제23권4호
• /
• pp.201-209
• /
• 2019

Response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills in 'Manual for Seismic Performance Evaluation and Retrofit of School Facilities' published in 2018 were investigated in the preceding study. However, since previous studies are based on 2D frame analysis and limited analysis conditions, additional verification needs to be performed to further apply various conditions including orthogonal effect of seismic load. Therefore, this study is to select appropriate response modification factors of school facilities for non-seismic RC moment frames with partial masonry infills by 3D frame analysis. The results are as follows. An appropriate response modification factor for non-seismic RC moment frames with partial masonry infills is proposed as 2.5 for all cases if the period is longer than 0.6 seconds. Also if the period is less than 0.4 seconds and the ratio of shear-controlled columns is less than 30%, 2.5 is chosen too. However, if the period is less than 0.4 seconds and the ratio of shear-controlled columns is higher than 30%, the response modification factor shall be reduced to 2.0. If the period is between 0.4 and 0.6 seconds, then linearly interpolates the response correction factor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.57-60
• /
• 1999

In many radio communication environments, there is a special component, called inter-symbol interference (ISI), mused by multipath time delay of signal and ISI components impose limitation of the data transmission rate. In this paper, we consider signaling pulse shapes, called partial response signaling (PRS), for minimizing the effect of ISI and show the improvement of performance by applying one of the partial-response signaling (PRS) pulses to two types of receiver system under dependent noise environments through the Monte-Carlo computer simulations.

• Journal of Communications and Networks
• /
• 제5권1호
• /
• pp.1-6
• /
• 2003

In this paper, we extend the derivation of the iterative soft-output Viterbi algorithm (SOVA) for partial response (PR) channels, and modify its decoding process such that it works consistently for arbitrary high code rates, e.g., rate 64/65. We show that the modified SOVA always outperforms the conventional SOVA that appears in the literature with a significant difference for high code rates. It also offers a significant cut down in the trace-back computations. We further examine its performance for parallel and serial concatenated codes on a precoded Class IC partial response (PR4) channel. Code rates of the form $\frac{k_0}{k_0+1}$($k_0$ = 4, 8, and 64) are considered. Our simulations indicate that the loss suffered by the modified SOVA, relative to the APP algorithm, is consistent for all code rates and is at most 1.2 dB for parallel concatenations and at most 1.6 dB for serial concatenations at $P_b$ = $10^{-5}$.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.71-82
• /
• 2019

Most school buildings consist of reinforced concrete (RC) moment frames with masonry infills. The longitudinal direction frames of those school buildings are relatively weak due to the short-column effects caused by the partial masonry infills and need to be evaluated carefully. In 'Manual for Seismic Performance Evaluation and Retrofit of School Facilities' published in 2018, response modification factor of 2.5 is applied to non-seismic RC moment frames with partial masonry infills, but sufficient verification of the factor has not been reported yet. Therefore, this study conducted seismic performance evaluation of planar RC moment frames with partial masonry infills in accordance with both linear analysis and nonlinear static analysis procedures presented in the manual. The evaluation results from the different procedures are compared in terms of assessed performance levels and number of members not meeting target performance objectives. Finally, appropriate response modification factors are proposed with respect to a shear-controlled column ratio.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.396-404
• /
• 1998

A numerical analysis is presented for the transient behavior of a rotating turbines blades. The response due to partial admission during start-up and resonance pass is considered, Modal analysis and numerical integation method are used for solving the problems A theory for determining the material and aerodynamic damping values of turbine blades is presented. The damping values of the various modeling of blaes-uniform beam and tapered twisted beam-are calculated and the influence on blades response is investigated. The effect of angular velocity on transient response are also shown.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.621-640
• /
• 2022

In the present article, the vibration response of a geometrically imperfect bi-directional functionally graded plate (2D-FGP) with geometric discontinuities and micro-structural defects (porosities) has been investigated. A porosity model has been developed to incorporate the effective material properties of the bi-directional FGP which varies in two directions i.e. along the axial and transverse direction. The geometric discontinuity is also introduced in the plate in the form of a circular cut-out at the center of the plate. The structural kinematic formulation is based on the non-polynomial trigonometric higher-order shear deformation theory (HSDT). Finite element formulation is done using C° continuous Lagrangian quadrilateral four-noded element with seven degrees of freedom per node. The equations of motion have been derived using a variational approach. Convergence and validation studies have been documented to confirm the accuracy and efficiency of the present formulation. A detailed investigation study has been done to evaluate the influence of the circular cut-out, geometric imperfection, porosity inclusions, partial supports, volume fraction indexes (along with the thickness and length), and geometrical configurations on the vibration response of 2D-FGP. It is concluded that after a particular cut-out dimension, the vibration response of the 2D FGP exhibits non-monotonic behavior.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.45-53
• /
• 1996

In this paper, the convergence behavior of timing phase when an adaptive partial response equalizer and decision-directed type of a PLL work together in a digital recording channel is described. The phenomena of getting biased in timing phase when the convergence parameter of an adaptive partial response equalizer and timing recovery constant of a PLL are not selected properly is introduced. The phenomena, occurring due to perturbation of timing phase, are analyzed, by computer simulation and the region of ocnvergence for timing phase is discussed. Also, a method to overcome the phenomena using a variable step-size parameter is described.

• 전기전자학회논문지
• /
• 제15권1호
• /
• pp.70-75
• /
• 2011

Longitudinal recording has been the cornerstone of all two generations of magnetic recording systems, FDD and HDD. In recent, perpendicular recording has received much attention as promising technology for future high-density recording system Research into signal processing techniques is paramount for the issued storage system and is indispensable like longitudinal recording systems. This paper focuses on the performance evaluation of the various detectors under perpendicular recording system. Parameters for improving the their performance are examined for some detectors. Detectors considered in this work are the partial response maximum likelihood (PRML), noise-predictive maximum likelihood (NPML), fixed delay tree search with decision feedback (FDTS/DF), dual decision feedback equalizer (DDFE) and multilevel decision feedback equalizer (MDFE). Their performances are analyzed in terms of mean squared error (MSE) and noise power spectra, and similarity between recording channel and partial response (PR) channel.