• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.559-569
• /
• 2021

This study was conducted to investigate the residual bearing capacity of steel-concrete composite beams under high-cycle fatigue loading through experiments and theoretical analysis. Six test beams with stud connectors were designed and fabricated for static, complete fatigue, and partial fatigue tests. The failure modes and the degradation of several mechanical performance indicators of the composite beams under high-cycle fatigue loading were analyzed. A calculation method for the residual bearing capacity of the composite beams after certain quantities of cyclic loading cycles was established by introducing nonlinear fatigue damage models for concrete, steel beam, and shear connectors beginning with the material residual strength attenuation process. The results show that the failure mode of the composite beams under the given fatigue load appears to be primarily affected by the number of cycles. As the number of fatigue loadings increases, the failure mode transforms from mid-span concrete crushing to stud cutting. The bearing capacity of a 3.0-m span composite beam after two million fatigue cycles is degraded by 30.7% due to premature failure of the stud. The calculated values of the residual bearing capacity method of the composite beam established in this paper agree well with the test values, which indicates that the model is feasibly applicable.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.597-604
• /
• 2008

Recognizing the necessity of the development of ecologically sound silvicultural system for the mature Korean pine (Pinus koraiensis), this study was carried out to examine the invasion and growth of understory vegetation after partial cutting. In 1997, the age class VII Korean pine forest in the Experimental Forest of Kangwon National University was opened up about 50% by modified shelterwood cutting with site preparation to induce succeeding regenerations. After 10 years, plenty of hardwood have come to the stand, forming understory vegetation. The abundance and composition of understory vegetation was periodically investigated in the ten $10m{\times}10m$ permanent sample plots, estimating importance values, species diversity index and the distribution of diameter and height of the understory vegetation. Encouraged by canopy opening, the coverage of understory reached perfect closure, composed of 22 tree species and 20 shrub species in 2007. Morus bombycis occupied 29.6% of the total importance value and Cornus controversa was 17.0%, followed by Styrax obassia, Quercus aliena, Quercus mongolica, Acer mono, and Pinus koraiensis. In the year of 2000 the species diversity was highest as 2.547 with 26 tree species and deceasing thereafter, showing 2.220 with 22 tree species in 2007. As understory layer was thickly covered and got grow bigger, some shade intolerant species were disappeared, lowering species diversity. In 2007 the biggest tree was a Quercus aliena with 11.3 cm of DBH and the tallest tree was a Cornus controversa with 9.8m of height. The frequency distribution of number of trees by diameter and height classes formed the inverted-J-shaped curve, supposed to be typical uneven-aged stand.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.133-147
• /
• 2000

A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.440-450
• /
• 2003

Statement of problem : The joints of removable partial denture alloys have failed frequently after routine usage. Purpose : The purpose of this study was to evaluate the mechanical properties of the laser welded Co-Cr alloys. Material and method : For this study 20 Co-Cr specimens were casted and 10 of them were seperated on the middle area and laser welded with Alpha laser welding machine(Siro Lasertec, Pforzheim, Germany). Rest of them which were as cast, were used as a control group. For the section of the experimental specimens, wire cutting machine was used to make a even gap of the all specimens. Laser welding was done with manufacturer's instrunction and tested each specimen by Instron Machine. Tensile strength, 0.2% yield strength and % elongations were recorded. Fractured surfaces were investigated with SEM. Results : The results were as follows : 1. The tensile strength of the laser welded group(617.7MPa) was about 75% of the as cast group(820.4MPa). It had stastically significant differences(p<0.05). 2. The % elongation of the experimental group was 6.6 which was lower than the control group(14.3). 3. Fracture of the experimental group occured in the welded surface and showed many voids. In contrast, the fracture surface of the control group was showed rough surfaces without any voids. Conclusion : The tensile strengths of the as-cast joints were higher than those for the laser welded joints, and the % elongation of the experimental group was lower than the control group. Porosity was found in laser-welded joints.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.172-177
• /
• 1996

The influences of testa-removal of seed, partial cutting of embryo, xylene treatment, growth regulator, chemical treatment and low temperature treatment on the seed germination of Lycoris aurea were investigated. The germination rate of the testa-removed seeds was higher than that of the whole seeds, and the seeds treated by testa-removal+xylene was 63% of germination. $GA_3$ was more effective than kinetin treatment, and seeds treated with $GA_3$ 200ppm showed 60% of germination. $KNO_3$ was more effective than KOH treatment, and seeds treated with 0. 1% $KNO_3$ was 76% of germination. The seeds, stored for two months at $5^{\circ}C$, showed the highest germination rate with 93%

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.290-300
• /
• 2018

The point of discovering a new technique using colored glass and clay is to improve the existing inconveniences, which is compatible with the mutual physical property of ceramics clay and glass. It is easy to express the decoration of colored glass in vertical ceramics, but the aesthetic expression is limited due to the rust flowing down on horizontal ceramics. So the point is the discovery of a new expressive method that do not melt down in vertical objects. A new technique is to crush finely and dilute the colored glass using clay, and brushing it to the wall. Additionally, inlaid technique and paste brush technique were applied to further enhance aesthetic end. The plastic method is oxidation and reduction, and the coloration was different due to the plasticity method. Particularly, partial cutting of engraved color glass leads to forming gray-line soft gradation. This effect will be good to apply to production of work and industrial ceramics.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.492-496
• /
• 1998

Intact measurement of leaf water content was attempted using the transmission of beta radiation. Prior to the experiments, two tested plants, rice and soybean, were grown in 1/5000a wagner pot. The moisure ratio of plant leaves were measured with the beta radiation transmission method using a G-M detector and $^{99}$ Tc as the beta ray sou-rce. Beta radiation transmission showed a tendancy to increase with the passage of time after leaf cutting. However, it showed a tendancy to decrease with water supply for the lack of water. A positive correlation was found between the leaf water content and beta radiation transmission. The mutiple regression analysis about leaf water content was obtained that the coefficient of partial regression for beta radiation transmission was much higher(rice; -0.863, soybean; -0.904) than that for specific leaf area(rice; 0.007, soybean: 0.004).

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1158-1168
• /
• 2005

A shunt from the left ventricle to the left anterior descending artery is being developed for coronary artery occlusive disease, in which the shunt or conduit connects the the left ventricle (LV) with the diseased artery directly at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Computational fluid dynamic analysis for the shunt hemodynamics was also done using a commercial finite element package. Simulation results indicate that in complete left anterior descending artery (LAD) occlusion, flow can be returned to approximately 65% of normal, if the conduit resistance is equal for forward and reverse flow. The net coronary flow can increase to 80% when the backflow resistance is infinite. The increases in flow rate produced by asymmetric flow resistance are enhanced considerably for a partial LAD obstruction, since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but considerably augments it when the resistance is asymmetric. The computational results suggest that an LV-LAD conduit will be beneficial when the resistance due to artery stenosis exceeds 27 PRU, if the resistance is symmetric. Fluid dynamic simulations for the shunt flow show that a recirculating region generated near the junction of the coronary artery with the bypass shunt. The secondary flow is induced at the cutting plane perpendicular to the axis direction and it is in the attenuated of coronary artery.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.463-469
• /
• 1988

The effects of moisture content and particle size of rice flour on the physical properties of the extrudate were examined by using a autogeneous single screw extruder. The moisture contents tested were in the range of 17-28% and the particle sizes were 18-60mesh and 60-120mesh. Samples were taken at different temperatures from the start-up period to the steady state operation. The expansion ratio increased and bulk density decreased as the moisture content and particle size of the flour decreased. The cutting force decreased and the air cell size became uniform as the moisture content and particle size of the flour decreased. As the moisture content increased, the yellowness of the extrudate powder decreased, while the lightness increased, the apparent viscosity increased and the water soluble index decreased. Gelatinization and partial dextrinization were apparent during the extrusion process, and the degree of dextrinization was appeared to be influenced by the levels of moisture content and particle size of rice flour.