• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1599-1604
• /
• 2007

LIMs propelling the MAGLEV which has been developed in Korea have 3-series and 2-parallel connection, so that 6 LIMs per one vehicle are fed by one inverter. Thrust performance of the parallel-operated LIMs can be different from each other because of variant magnetic air gaps and electrical impedance. The thrust difference between the parallel LIMs cause a twist force on the vehicle. This paper proposes an algorithm to measure thrust of the parallel-operated LIMs. The method uses a digital signal processor(TMS320F2812), voltage and current sensors. As a result, thrust, flux and currents of the parallel-operated small LIMs which are manufactured in our laboratory are monitored by the developed measurement system.

• Fisheries and Aquatic Sciences
• /
• 제24권9호
• /
• pp.297-310
• /
• 2021

The rockworm gut flora was identified at each growth stage to elucidate the composition of the bacterial community. The source material was Marphysa sanguinea fed regular feed and fed biofloc at the adult stage in parallel. The systematic bacterial community composition was determined based on the next-generation sequencing method, and alpha diversity and beta diversity were conducted to access the species diversity within and between the bacterial communities, respectively. The composition of the gut flora changed considerably as the rockworms developed. The shift in the gut flora was confirmed at the phylum, family, and genera level of the bacterial communities. The Vibrio species associated with high rockworm mortality occupied 7.7% of the gut flora at the larval stage; however, they disappeared in the healthy adult gut. Moreover, different gut flora was observed between adults fed regular feed and those fed biofloc. Specifically in the biofloc-fed adult gut, several immune relevant and water-purifying bacteria were detected. The biofloc-fed adult gut flora could decompose and mineralize organic sediment, and thus be effectively utilized for integrated multitrophic aquaculture. The Venn diagram revealed that only two bacterial species were shared throughout all growth stages, and the biofloc-fed adults exhibited the highest diversity within the bacterial community.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1241-1250
• /
• 2018

Parallel three-phase voltage source inverters in a direct connection configuration are widely used to increase system power ratings. A zero-sequence circulating current can be generated according to the switching method; however, the zero-sequence circulating current not only distorts current, but also reduces the system reliability and efficiency. In this paper, a model predictive control scheme is proposed for parallel inverters to drive an interior permanent magnet synchronous motor with zero-sequence circulating current suppression. The voltage vector of the parallel inverters is derived to predict and control the torque and stator flux components. In addition, the zero-sequence circulating current is suppressed by designing the cost function without an additional current sensor and high-impedance inductor. Simulation and experimental results are presented to verify the proposed control scheme.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.1-9
• /
• 2015

This study presents a novel transformer isolated parallel connected quasi Z-source (qZ-source) full-bridge DC-DC converter that uses a coupled inductor in both the qZ-source network and output filter inductor. Unlike traditional voltage-fed or current-fed converters, the proposed converter can be open- and short-circuited without damaging switching devices. Therefore, the desired buck and boost functions can be achieved and converter reliability can be significantly improved. All the bulky inductors in the qZ-source network and output filter can also be minimized with the proposed inductor structures. A 4 kW prototype DC-DC converter is built and tested to verify the performance of the proposed converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.26-28
• /
• 2000

A novel oxidant generation and ion precipitation cell with slits on parallel plate electrodes system has been proposed and an effect of the number and size of slits on ion precipitation and oxidant generation characteristics. As a result, with the electrodes with 48 slits($S=200{\times}60[mm^2]$. d = 1.5, 5.0 [mm]), it is found that the oxidant contained waters of 17.0 [ppmm] and 23.5 [ppmm] in acid water were obtained with 0.1 [wt%] NaCl dissolved tap water fed. And oxidant contained waters of 0.5 [ppmm] and 1.5 [ppmm] in alkali water were obtained with 0.1 [wt%] NaCl dissolved tap water fed. And the oxidant contained waters of 7.0 [ppmm] and 11.5 [ppmm] in mixed water were obtained with tap water and 0.1 [wt%] NaCl dissolved tap water fed. Consequently, very high ion precipitation and dense oxidant generation characteristics can be realized by having slits on the electrodes of conventional cells as these slits increase the electric fields and decrease the space charge limiting actions in interelectrode space.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1481-1487
• /
• 2017

This paper proposes a sensorless speed control algorithm for parallel-connected dual Surface-mounted Permanent Magnet Synchronous Motors fed by a single inverter. For stable parallel operation of synchronous motors with a single inverter, each motor has to be constantly kept in the synchronization state regardless of load torque. If the master motor with the larger load is controlled, the synchronous state will be maintained. Therefore, detection of the master motor is essential. Conventionally, the master motor is determined by comparing the rotor position error from the relation between the back-EMF for torque angle and the flux position. consequently, the position sensor is deemed essential for finding the rotor position. In this paper, we proposed a method that decides the magnitude of the load from the power angle of two motors due to the load variation and selects the motor to control through the sign function for the sensorless speed control without the position sensor. The results of simulation and experiment conducted verify the efficacy of the proposed method.

• 전자공학회논문지SC
• /
• 제38권5호
• /
• pp.70-78
• /
• 2001

본 연구에서는 전류제어 효과를 갖는 전압제어 펄스폭 변조 방식의 5' true color FED 구동시스템을 설계하였다. 제안한 구동방식은 전압제어 펄스폭 변조방식과 전류제어 방식의 장점을 가지고 있다. 또한, FED 구동회로의 시뮬레이션을 위하여 FED 서브 픽셀에 대한 새로운 회로 모델을 제안한다. 제안된 모델은 FED 서브 픽셀의 특성과 FED 패널의 기생 효과인 게이트 라인간 커플링 현상과 인접한 캐소드 라인을 통하여 흐르는 누설 전류 등을 고려하고 있다. FED 구동회로의 출력단은 제안된 모델을 사용하여 최적화되었다. R.G.B 입력데이터 신호 처리를 병렬처리 방식으로 하여 기존의 직렬처리 방식에 비해서 화면에 영상을 디스플레이하는 duty ratio를 최대로 하여 휘도를 높일 수 있도록 하였다. 이러한 연구 결과를 바탕으로 $300{\times}224$의 해상도를 가지는 5' true color FED를 성공적으로 디스플레이 하였다.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.105-109
• /
• 2009

The problem of electromagnetic coupling between a slit fed by a flanged parallel-plate waveguide(PPW) and a slit in an infinite nearby conducting screen parallel to the flanged ground conductor is studied as a simplified problem for a near-field scanning microscopy(NSM). The method of moments isused to solve the coupled integral equations for the electric field distributions over the slits. The performance of the proposed apparatus as an NSM is tested by examining the effects of some geometrical parameters on the equivalent slit admittance and coupled powers through the slits.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.88-96
• /
• 1996

Periodically slotted dielectricalloy filled parallel-plate waveguide as a leaky wave antenna is designed and fabricated at the center frequency of 10.0GHz. The antenna was fed by use of a hog-horn structure. The hog-horn and the two side walls and the lower plate of parallel-plate waveguide were fabricated form duralumin. The upper plate of parallel-plate waveguide with 48 periodic slots was made of copper plate of 1mm thickness. The dielectric material inside the parallel-plate waveguide was chosen to be paraffin. The experimental radiation pattern for the fbricated antenna was compared with the theoretical results for the finite periodic structure.

• Journal of electromagnetic engineering and science
• /
• 제12권2호
• /
• pp.171-175
• /
• 2012

In this work, a new microstrip-to-substrate integrated waveguide (SIW) transition using the parallel half-mode substrate integrated waveguide (HMSIW) is proposed. The proposed transition consists of three sections : a microstrip, parallel HMSIWs, and an SIW. By inserting the parallel HMSIWs section between the microstrip section and the SIW section, the proposed transition can improve the return loss characteristics of the near cut-off frequency because the HMSIWs section has a lower cut-off frequency than the SIW section (8.6 GHz). The lower cut-off frequency is achieved through gradual electromagnetic field mode changes for a low reflection. The measured return loss is less than 20 dB in the of 9.1~16.28 GHz freqeuncy range for the back-to-back transition. The measured insertion loss is within 1.6 dB for the back-to-back transition. The proposed transition is expected to play an important role in wideband SIW circuits fed by a microstrip.