• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.36-38
• /
• 2018

As the battery capacity requirement increases, battery cells are connected in a parallel configuration. However, the sharing current of each battery cell becomes unequal due to the imbalance between cell's impedance which results the mismatched states of charge (SOC). The conventional fixed-resistance balancing methods have a limitation in battery equalization performance and system efficiency. This paper proposes a battery equalization method based on dynamic resistance technique, which can improve equalization performance and reduce the loss dissipation. Based on the SOC rate of parallel connected battery cells, the switches in the equalization circuit are controlled to change the equivalent series impedance of the parallel branch, which regulates the current flow to maximize SOC utilization. To verify the method, operations of 4 parallel-connected 18650 Li-ion battery cells with 3.7V-2.6Ah individually are simulated on Matlab/Simulink. The results show that the SOCs are balanced within 1% difference with less power dissipation over the conventional method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.174-175
• /
• 2019

Battery cells are connected in parallel to enlarge the system capacity. However, cell inconsistency may reduce the overall system capacity and cause the over-charging or over-discharging issue. This paper proposes a SOC-based sequencing equalizer for parallel-connected battery configuration that uses the ANFIS (adaptive neuro-fuzzy inference system) algorithm to make the switching decision. Depend on the load current and the SOC (state-of-charge) rate of cells, the switching decision is made to equalize the SOC of the battery cells. The simulation results show that the system capacity is maximized and the controller is adaptive for a large number of parallel-connected in dynamic load profile.

• 한국표면공학회지
• /
• 제55권4호
• /
• pp.231-235
• /
• 2022

As environmental pollution becomes more serious, the demand for electric vehicles (EVs) and lithium-ion batteries for electric vehicles is rapidly increasing worldwide. Accordingly, the amount of waste batteries is also increasing, and a technology for recycling and reusing them is required. In order to reuse a used battery, it is necessary to non-destructively diagnose the deterioration condition of the battery. Therefore, in this study, we investigate the diagnosis of degradation for parallel-connected lithium-ion battery cells through non-constructive electrochemical approach. As the number of parallel-connected cells increased, in addition to linear degradation, abrupt step-like degradation occurred, which is attributed to the predominant degradation of specific cells. In addition, it is confirmed that deteriorated cells among multiple cells can be distinguished through a simple measurement of open circuit voltage (OCV).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.50-52
• /
• 2019

Dynamic resistance equalization is a viable technique to balance SOC of cells in a parallel-connected battery configuration due to high equalization performance, simplicity and low-cost. However, an inappropriate design of the equalization resistor can degrade the equalization performance and increase the power loss. This paper proposes an optimization process to design the equalization resistors to minimize power loss and equalization error. The simulation results show that the optimally designed resistor significantly enhance the performance in comparison with the conventional fixed-resistor equalization.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.472-480
• /
• 2009

In this paper, a charge equalization converter with parallel-connected primary windings of transformers is proposed. The proposed work effectively balances the voltage among Lithium-Ion battery cells despite each battery cell has low voltage gap compared with its state of charge (SOC). The principle of the proposed work is that the equalizing energy from all battery strings moves to the lowest voltage battery through the isolated dc/dc converter controlled by the corresponding solid state relay switch. For this research a prototype of four Lithium-Ion battery cells is optimally designed and implemented, and experimental results show that the proposed method has excellent cell balancing performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.256-258
• /
• 2007

A charge equalization converter with parallel-connected primary windings of transformers is proposed in digest. The proposed work effectively balance the voltage among Lithium-Ion battery cells despite each battery cell has low voltage gap compared with its SOC. The principle of the proposed work is that the equalizing energy from all battery strings moves to the lowest voltage battery through the isolated dc/dc converter controlled by the corresponding bi-directional switch. In this digest, a prototype of four Lithium-Ion battery cells is optimally designed and implemented, and experimental results show that the proposed method has excellent cell balancing performance.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.280-286
• /
• 2018

A sensorless active damping scheme for LCL filters in grid-connected parallel inverters for battery energy storage systems is proposed. This damping method is superior to the conventional notch filter and virtual damping methods with respect to robustness against the variation of the resonance of the filter and unnecessary additional current sensors. The theoretical analysis of the proposed damping method is explained in detail, along with the characteristic comparison to the conventional active damping methods. The performance verification of the proposed sensorless active damping method shows that its performance is comparable to that of the conventional virtual damping method, even without additional current sensors. Finally, simulation and experimental results are provided to examine the overall characteristics of the proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.554-559
• /
• 1998

Equalizing the state of charge of cell that affects the charge/discharge quality and efficiency of the battery through the charge/discharge characteristic experiments of battery source, we develope the high efficiency charge/discharge system which would be used in serial HEV with the constant engine-generator output. For this, establishes the electrical model of Ni-MH battery appropriate to the high efficiency charge/discharge conditions. There is no model of Ni-MH cell, so we used Ni-Cd model and obtain the Ni-MH model through the experiment. A reason that each cell has the same charge/discharge property for applying the cell model to serial/parallel connected battery source extensively is needed. Therefore, in this paper, propose the Ni-MH charger/discharger has the equalization charging function and selectable cut-off function.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.695-703
• /
• 2019

본 논문에서는 배터리 팩을 구성하는데 있어 높은 전압의 직렬 연결된 배터리 모듈의 병렬 연결에서 발생할 수 있는 순환 전류를 제거하는 방법을 제시하였다. 제거 방법은 배터리 팩의 구성상에 있어서 양방향 DCDC 컨버터와 슈퍼 캐패시터를 이용한 VVSM(Variable Voltage Variable Module)이라고 명명한 모듈을 직렬 연결된 배터리 셀들 중 하나 대신에 삽입하는 방식인데 VVSM은 이 모듈에서 마치 우리가 원하는 전압으로 제어할 수 있는 배터리 셀처럼 동작한다. 전압을 가변할 수 있는 배터리 셀(VVSM)을 이용하여 직렬 연결된 배터리 모듈의 전압을 아주 손쉽게 일치시킬 수 있었다. 제시한 방법을 증명하기 위해 배터리를 모형화한 모델을 이용하여 모의 실험을 시행 하였다. 또한 직렬 연결된 배터리 셀 만으로 된 모듈과 제안한 VVSM이 적용된 모듈을 실제 제작하여 두 모듈을 병렬 연결하여 둘 사이에 순환 전류를 측정하여 비교함으로써 제안된 방법이 효과적으로 순환 전류을 억제할 수 있음을 검증하였다.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.34-42
• /
• 2001

전지는 화학에너지를 기계적인 처리과정 없이 전기에너지로 직접 전환하는 장치이다. 부하전압과 부하전류의 용량에 따라 단위전지를 직.병렬 연결하여 사용하게 되며, 전지의 병렬운전은 단독운전 보다 전압강하를 더 천천히 발생시키므로 전압강하에 민감한 전력변환장치들의 효율에 밀접한 관계를 가지고 있다. 병렬운전의 필요성과 장점 때문에 대부분의 축전지를 사용하는 시스템은 병렬운전을 하고 있고, 반면에 선.구 축전지 사이에서 순환 전류가 흐르고, 자가방전이 일어나는 단점 또한 가지고 있다. 신 축전지에서 충.방전 전류가 과다하게 흐르는 불평형 현상과 이로 인해 축전지의 수명단축을 일으키게된다. 본 논문에서는 마이크로 프로세서를 사용하여 선.구 축전지 사이의 볼평형 전류를 검출하고 외부저항을 첨가시켜 내부저항의 차이에 대한 감소효과를 얻어 불평형 전류를 보상하였다. 이를 실험을 통해 구현하였다.