• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.791-806
• /
• 2020

본 연구에서는 공학목재로 목구조건축에 주로 사용되는 집성재 및 CLT 그리고 Ply-lam CLT의 블록전단시험을 실시하여 강도 및 파괴 유형을 비교 분석하였다. 이를 통해 Ply-lam CLT의 라미나 및 합판의 수종, 접착제의 종류 및 Layer구성 등 최적생산을 위한 제조조건을 구명하고자 하였으며 그 결과는 다음과 같다. 블록전단시험을 통해 집성재, Ply-lam CLT, CLT 순으로 높은 강도를 나타냈다. 특히, 낙엽송 합판과 낙엽송 라미나의 복합구조로 제조되는 Ply-lam CLT의 전단강도는 집성재 전단강도 기준인 7.1 N/㎟을 통과하였다. 아울러 본 연구에서는 집성재, CLT, Ply-lam 접착에 사용된 접착제 종류에 따른 전단강도의 차이는 나타나지 않았다. 그러나 Ply-lam CLT의 경우에는 라미나와 합판의 수종에 따라 Ply-lam CLT의 전단강도의 차이를 나타냈다. 그 결과는 낙엽송 > 남양재 ≒ 육송 합판 순으로 높은 강도를 나타났다. Ply-lam CLT의 최적 구성은 낙엽송 합판과 낙엽송 라미나를 사용하는 경우이며 접착제는 용도에 따라 PRF, PUR을 선정하여 사용하면 될 것으로 판단된다. 목질재료 유형에 따른 전단강도 파괴 양상 결과 분석을 통하여 집성재는 shear parallel-to-grain, CLT는 rolling shear, Ply-lam CLT는 shear parallel-to-grain과 rolling shear가 복합적으로 나타났다. 이는 전단강도 결과와 밀접한 관련이 있으며 rolling shear로 인하여 CLT보다 Ply-lam CLT에서 더 높은 전단 강도를 나타내는 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.689-702
• /
• 2017

In this study, with the view to using effectively small and medium diameter Korean domestic woods as structural materials, cross-laminated woods were manufactured by using six species of Korean domestic softwoods and hardwoods, and bending creep properties were investigated for each species. The creep curves showed the shape of the exponential function plot, and the creep curves after 1 hour were able to estimate by fitting it to the power law. The initial and creep compliances of cross-laminated woods showed the higher values in wood species with a low density than in that with a high density. And by cross-laminating, the initial and creep compliances perpendicular to the grain considerably decreased, the extent of the decrease was found to be greater in creep deformation than in initial deformation. The creep anisotropies of cross-laminated woods were considerably decreased by cross-laminating. The relative creep of $C_{\bot}$ type composed of perpendicular-direction lamina in the faces decreased 0.59 - 0.64 times compared to that of $P_{\bot}$ type composed of perpendicular-direction laminae in all layers, and that for $C_{\parallel}$ type composed of parallel-direction laminae in the faces increased 1.5 - 1.6 times compared to that of $P_{\parallel}$ type composed of parallel-direction laminae in all layers.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.85-94
• /
• 1994

A high-resolution transmission electron microscopy study of the solid phase crystallization of the amorphous silicon thin films, deposited on SiOS12T at 52$0^{\circ}C$ by low pressure chemical vapor deposition and annealed at 55$0^{\circ}C$ in a dry N$_{2}$ ambient was carried out so that the arrangement of atoms in the crystalline silicon and at the amorphous/crystalline interface of the growing grains could be understood on an atomic level. Results show that circular crystalline silicon nuclei have formed and then the grains grow to an elliptical or dendritic shape. In the interior of all the grains many twins whose{111} coherent boundaries are parallel to the long axes of the grains are observed. From this result, it is concluded that the twins enhance the preferential grain growth in the <112> direction along {111} twin planes. In addition to the twins. many defect such as intrinsic stacking faults, extrinsic stacking faults, and Shockley partial dislocations, which can be formed by the errors in the stacking sequence or by the dissociation of the perfect dislocation are found in the silicon grain. But neither frank partial dislocations which can be formed by the condensation of excess silicon atoms or vacancies and can form stacking fault nor perfect dislocations which can be formed by the plastic deformation are observed. So it is concluded that most defects in the silicon grain are formed by the errors in the stacking sequence during the crystallization process of the amorphous silicon thin films.

• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.368-373
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the bulk trap levels and grain boundary characteristics of $Bi_2O_3$-based ZnO (ZB) varistor using admittance spectroscopy and dielectric functions (such as $Z^*,\;Y^*,\;M^*,\;{\varepsilon}^*$, and $tan{\delta}$). Admittance spectra show more than two bulk traps of $Zn_i$ and $V_o$ probably in different ionization states in ZnO-$Bi_2O_3-Cr_2O_3$ (ZBCr) system. Three kinds of temperature-dependant activation energies ($E_{bt}'s$) were calculated as 0.11~0.14 eV of attractive coulombic center, 0.16~0.17 eV of $Zn_{\ddot{i}}$, and 0.33 eV of $V_o^{\cdot}$ as dominant bulk defects. The grain boundaries of ZBCr could be electrochemically divided into two types as a sensitive to ambient oxygen i.e. electrically active one and an oxygen-insensitive i.e. electrically inactive one. The grain boundaries were electrically single type under 460 K (equivalent circuit as parallel $R_{gb1}C_{gb1}$) but separated as double one ($R_{gb1}C_{gb1}-R_{gb2}C_{gb2}$) over 480 K. It is revealed that the dielectric functions are very useful tool to separate the overlapped bulk defect levels and to characterize the electrical properties of grain boundaries.

• 한국정보처리학회논문지
• /
• 제1권1호
• /
• pp.105-113
• /
• 1994

본 논문에서는 HCH(m,p)에 기반을 둔 PALM 시스템의 구조와 네트웍의 성능을 연구 하였다. HCH(m,p)는 하나의 CP를 중심으로 p개의 AP를 연결하여 클러스터를 구성하고, 클러스터를 m-p 차원의 하이퍼큐브로 연결한 소결합 다중프로세서 시스템이다. 본 시스템에서는 AP와 CP 및 CP와 CP간을 DPR로 연결하여 워드단위의 통신이 가능하도록 구성하여 빠르고 안정된 메세지 전송을 가능하게 하였다. PALM 시스템에 사용된 네트 웍은 여러 가지 HCH 네트웍 중에서 시스템에 포함되는 AP의 갯수가 최대이나 CP 및 링크(또는 DPR)의 합이 최소인 최적 HCH(m,2) 네트웍이다. 본 논문에서는 HCH(2,2) 인 실험시스템을 구성하고 네트웍의 통신성능을 측정하였으며, PALM시스템의 작은 통 신/연산비는 메세지 통신형 다중프로세서 시스템에서도 화인 그레인(fine grain) 병렬성을 다룰 수 있음을 보인다.

• Journal of Forest and Environmental Science
• /
• 제9권1호
• /
• pp.10-18
• /
• 1993

북양산(北洋産) 주요(主要) 침(針), 활엽수재(闊葉樹材)의 물리적(物理的) 성질(性質)(밀도(密屠), 만재율(晩材率), 공권율(孔圈率), 평균년수폭(平均年輸幅))과 역학적(力學的) 성질(性質)(종압축강도, 횡압축강도, 전단강도에 관하여 연구(硏究) 조사하였다. 이 실험(實驗)의 연구(硏究) 결과(結果)는 다음과 같다. 밀도(密度)와 만재율(晩材率)은 물리적(物理的) 역학적(力學的) 성질(性質)과 밀접(密接)한 관계(關係)를 나타낸 반면, 공권율(孔圈率)과 평균년수폭(平均年輸幅)은 물리적(物理的) 역학적(力學的) 성질(性質)과 거의 관계(關係)가 없음을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.61-69
• /
• 2003

This study investigated the effect of moisture content and loading direction on dowel bearing strength of two types of SCL. Dowel bearing tests of LVL and PSL were conducted with two different MC level, 7.5% and 19%, and two different oriention, L-direction(loading parallel to grain) and X-direction(loading perpendicular to grain). Most of specimens showed typical load-deformation curves and intersected 5% offset line. Failure modes were classified into two categories; spliting(for L-direction specimens) and peeling(for X-direction specimens). Dowel bearing strength generally decreased with increasing MC. The decreasing rate was more significant in X-directon. ESG also decreased with increasing MC, and the ratio of ESG of 7.5% versus 19% was about 1.47. Dowel bearing strength of LVL and PSL in L-direction was higher than that of X-direction. This results indicated that MC and loading orientation had a significant effect on dowel bearing strength of SCL. The average dowel bearing strength of LVL were higher than that of PSL in each loading direction. Two types of probability distribution model were chosen to quantify strength distribution, normal and 2-parameter weibull distribution. The two models showed good agreement with the data, especially in lower tail of the cumulative distribution. Normal and 2-parameter weibull distribution seemed to proper model of the dowel bearing strength for each MC levels.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.340-344
• /
• 2014

An effective process was employed for synthesizing anisotropic magnetic $SmCo_7$-type alloy flakes with high coercivity, which is highly desirable for many applications. The highest coercivity of 16.3 kOe corresponds to a typical flake thickness of 200 nm for the 3-h ball-milled sample. The anisotropy field was calculated by measuring the parallel and perpendicular directions to the easy magnetization direction of the powders. The anisotropy field decreased with the increase of the ball milling time, thus indicating that the decrease of coercivity was mainly caused by the reduction of the anisotropy field. Microstructure analysis indicated that the morphology, grain size, and anisotropy field of these samples have a great influence on the magnetic properties.

• Journal of the korean society of oceanography
• /
• 제33권3호
• /
• pp.71-79
• /
• 1998

Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권9호
• /
• pp.1073-1082
• /
• 1999

본 논문에서는 시스템 내의 프로세서들을 효과적으로 사용하기 위한 적응적 프로세서 할당 정책을 제안한다. 프로그램의 병렬성을 향상시키기 위하여 일반적으로 병렬 처리에 사용될 프로세서 개수를 증가시킨다. 그러나 증가된 프로세서들은 그레인 크기에 변화를 일으키며 이는 캐쉬 성능에 영향을 미친다. 특히 대역이 제한된 공유 버스를 사용하는 시스템에서는 프로세서 개수의 증가는 공유 버스에 대한 접근 경쟁을 크게 증가하므로 버스에서 대기하는 시간이 프로세서 증가에 의한 계산 능력 이득을 상쇄시키는 주요한 원인이 되고 있다. 본 논문에서 제안한 적응적 프로세서 할당 정책은 프로그램이 수행되는 도중에 임의의 기간동안 공유버스에 대기중인 프로세서 분포에 관한 정보를 얻는다. 그리고 이 정보를 바탕으로 프로세서 개수를 변경하는 방법이다. 모의 시험에서 적응적 프로세서 할당 정책은 프로그램들의 버스 트래픽 특성에 따른 최적의 적합한 프로세서 개수를 발견함을 보인다. 그리고 적응적 프로세서 할당 정책은 고정된 프로세서 개수를 사용한 가장 좋은 성능보다는 다소 떨어진 성능을 나타내었으나 시스템의 프로세서 활용성을 높여 효과적 시스템 사용에 기여함을 보인다. Abstract In this paper, the adaptive processor allocation policy is suggested to make effective use of processors in system. To enhance the parallelism, the number of processors used in the parallel computing may be increased. However, increasing the number of processors affects the grain size of the parallel program. Therefore, it affects the cache performance. In particular, when the shared bus is employed, since increasing the number of processors can result in a significant amount of contention to achieve the shared-bus, the increased computing power is offset by the bus waiting time due to these contentions. The adaptive processor allocation policy acquires the information about the distribution of waiting processors on shared bus for any execution period of programs. And it changes the number of processors working in parallel processing during the program's run. Our simulation results show that the adaptive processor allocation policy finds the optimum feasible number of processors based on the bus traffic characteristic of programs. Thus, it contributes to effective system utilization, even though it performs slightly less efficiently than using a fixed number of processors with the best performance.